My Samsung Washer Makes A Loud Noise When Spinning

Introduction

A loud noise coming from your Samsung washing machine during the spin cycle can be alarming and disruptive. It often signals that something isn’t working correctly. This issue not only makes laundry day unpleasant, but can also indicate a problem that could lead to further damage and costly repairs if left unattended. Identifying the cause quickly and addressing it is crucial to prevent more significant issues and extend the life of your appliance. Let’s explore common causes and troubleshooting steps so you can quiet that noisy washer!

Common Causes of My Samsung Washer Makes a Loud Noise When Spinning

Here are some of the most frequent reasons why your Samsung washer might be making a racket during the spin cycle:. For more related activities, check out our Kenmore Washer Not Draining Properly.

• Unbalanced Load: Clothes clumped on one side of the drum can cause excessive vibration and noise.
• Foreign Objects: Small items like coins, buttons, or bra wires can get lodged between the inner drum and outer tub.
• Worn Drum Bearings: These bearings allow the drum to spin smoothly. When they wear out, they can produce a grinding or roaring sound.
• Damaged Suspension Rods: Suspension rods help stabilize the drum during operation. If they’re damaged, the drum can wobble excessively.
• Failed Drive Pulley: The drive pulley transfers power to the drum. A worn or damaged pulley can create noise.
• Worn Drive Belt: The drive belt connects the motor to the pulley. A worn or cracked belt can slip and cause a squealing or slapping sound.
• Motor Coupling Issues: The motor coupling connects the motor to the transmission. When worn, it may start causing loud banging noises during spin cycle.
• Drain Pump Problems: The drain pump removes water from the washer. A failing pump can make a loud buzzing or grinding noise.

Symptoms Checklist

Use this checklist to better understand what’s causing the noise:

• The noise occurs only during the spin cycle.
• The noise is a grinding, roaring, banging, or squealing sound.
• The washer vibrates excessively during the spin cycle.
• You can see the drum wobbling or shaking violently.
• You find small objects in the washer after a cycle.
• The noise started suddenly after washing a particular load.

How to Fix My Samsung Washer Makes a Loud Noise When Spinning Step-by-Step Guide

Follow these steps to diagnose and fix the loud noise:

1. Unplug the Washer: For safety, disconnect the power cord from the wall outlet before starting any troubleshooting.
2. Check for an Unbalanced Load: Open the washer and redistribute the clothes evenly around the drum. Try running a spin cycle again.
3. Inspect for Foreign Objects: Carefully check the drum and the rubber seal around the door for any loose items (coins, buttons, etc.). Use pliers or tweezers to remove them.
4. Check the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the washer, behind a small access panel). Remove and clean the filter, looking for obstructions like lint, hair, or small objects.
5. Inspect Suspension Rods: Open the top of the washing machine (consult your user manual for instructions) and visually inspect the suspension rods for damage or looseness. They should be firmly attached and in good condition.
6. Check the Drive Belt: Remove the rear access panel of the washer. Locate the drive belt connecting the motor to the drum pulley. Check for cracks, wear, or looseness.
7. Examine the Drive Pulley: Check the drive pulley for signs of damage or wear. Make sure it’s securely attached to the drum shaft.
8. Listen Carefully: With the back panel removed, have someone briefly start the spin cycle (be extremely careful!). Try to pinpoint where the noise is coming from. This can help narrow down the cause.
9. Check the Washer’s Level: Use a level to ensure the washing machine is sitting level on the floor. Adjust the leveling feet as needed to eliminate any rocking or instability.
10. Run a Calibration Cycle: Some Samsung washers have a calibration cycle. Consult your user manual to learn how to initiate this cycle. This can sometimes resolve minor imbalances.
11. Snug All Fasteners: Check visible screws and bolts, especially those that hold the motor and drum assembly in place. Gently snug them to ensure they are secure, but do not overtighten.

Fix the Issue Without Buying Parts

Before resorting to part replacements, try these free and simple solutions:

• Reset the Washer: Unplug the washer for 10 minutes, then plug it back in. This can sometimes reset the control board and resolve the issue.
• Deep Clean the Washer: Run a cleaning cycle with a washer cleaner or a mixture of vinegar and baking soda. This can remove buildup that might be causing noise or imbalance.
• Regular Maintenance: Wipe down the drum and door seal after each use. Regularly clean the drain pump filter to prevent clogs.

When Replacement Might Be Necessary

If the noise persists after trying the above steps, certain parts might need replacing. Drum bearings are a common culprit, but can be expensive and difficult to replace. Suspension rods and drive belts are generally cheaper and easier to replace. A new drive belt can cost between $20-$50, suspension rods around $30-$70 per set, while replacing drum bearings can range from $150-$400 including labor. Always consult your washer’s service manual or a qualified technician before attempting any repairs.

Safety Warning

• Always unplug the washer before performing any maintenance or repairs.
• Be careful when handling tools and working around electrical components.
• Avoid working on the washer if the floor is wet to prevent electric shock.
• If you are not comfortable performing repairs yourself, consult a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Wrench
• Level
• Gloves
• Shop towels

FAQ

Here are some frequently asked questions:

• Q: Why is my washer only noisy during the spin cycle? A: The spin cycle involves high-speed rotation, which magnifies any imbalance or mechanical issues.
• Q: Can I still use the washer if it’s making noise? A: It’s best to avoid using the washer until you’ve identified and addressed the cause of the noise, as continued use could cause further damage.
• Q: How do I know if the bearings are bad? A: Bad bearings usually produce a loud grinding or roaring sound that gets worse as the drum spins faster. You might also feel excessive vibration.
• Q: My washer is new. Why is it making noise? A: Even new washers can sometimes experience issues like unbalanced loads or shipping damage. Check the leveling and look for any obstructions.
• Q: How often should I clean my washer’s drain pump filter? A: Cleaning the filter every 1-3 months is recommended for maintaining efficient drainage and preventing noises.

Conclusion

Troubleshooting a noisy Samsung washer can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Remember to start with the simplest solutions, such as checking for unbalanced loads and foreign objects. If the problem persists, don’t hesitate to consult a qualified appliance repair technician. By taking a proactive approach, you can keep your washer running smoothly and quietly for years to come!

Youtube Video: