Lg Tromm Washer Leaking From Back

Introduction

Discovering your LG Tromm washer leaking from the back is never a pleasant surprise. It can lead to wasted water, potential damage to your floors and walls, and a generally damp and unpleasant environment. Leaks often become noticeable during the spin cycle, when the washer is under the most pressure. Addressing this issue promptly is crucial to prevent further damage and maintain the longevity of your washing machine. Dont panic most leaks have simple causes and can be resolved with a bit of troubleshooting. Explore more in our Washing Machine Problems 4 collection.

Common Causes of LG Tromm Washer Leaking From Back

Several factors can contribute to a leak from the back of your LG Tromm washer:

• Loose Water Inlet Hoses: These hoses connect to the water supply and can loosen or corrode over time.
• Damaged Water Outlet Hose: The drain hose removes wastewater, and cracks or loose connections cause leaks.
• Clogged Drain Hose: A blockage in the drain hose creates back pressure, potentially forcing water to leak.
• Faulty Water Inlet Valve: The valve that controls the water entering the washer might crack or fail.
• Worn or Damaged Tub Seal: Located between the inner and outer tub, this seal prevents water from escaping.
• Overfilling: Overloading the washer can cause water to overflow and leak out the back.
• Improper Leveling: An unlevel washer can vibrate excessively, stressing connections and leading to leaks.
• Damaged Drain Pump: A crack or loose connection on the drain pump can cause water to leak from the back.

Symptoms Checklist

Use this checklist to accurately identify the issue:

• Water pooling behind the washing machine.
• Water stains on the wall behind the washer.
• Damp or moldy smell near the washer.
• Leakage only occurring during specific cycles (e.g., spin).
• Visible drips or streams of water coming from the back panel.
• Excessive vibration during operation.

How to Fix LG Tromm Washer Leaking From Back Step-by-Step Guide

Follow these steps to troubleshoot and resolve the leak:

1. Disconnect the Power: Unplug the washer from the electrical outlet for safety.
2. Turn Off Water Supply: Locate the water shut-off valves behind the washer and turn them off.
3. Inspect Water Inlet Hoses: Check the hoses for cracks, kinks, or loose connections. Tighten connections with pliers, but don’t overtighten.
4. Check Water Outlet Hose: Inspect the drain hose for damage and ensure its securely connected to the drainpipe.
5. Inspect Drain Hose Connection: Make sure the drain hose connection is tightly clamped and free from cracks.
6. Clean the Drain Hose: Disconnect the drain hose and flush it with water to remove any clogs. A garden hose can be helpful.
7. Inspect the Water Inlet Valve (If Accessible): If you can access the inlet valve (usually behind a panel), check for cracks or leaks around the valve.
8. Level the Washer: Use a level to ensure the washer is sitting evenly. Adjust the leveling feet at the bottom of the washer until it’s stable.
9. Run a Test Cycle: After making adjustments, turn on the water supply and plug in the washer. Run a short wash cycle to check for leaks.
10. Observe Carefully: Watch the back of the washer carefully during the test cycle to pinpoint the source of any remaining leaks.
11. Check for Overfilling: Ensure you are not overloading the washer. Follow the manufacturer’s guidelines for load size.
12. Inspect the area around Drain Pump: (If you are comfortable removing the rear panel): Look for any obvious cracks or loose connections around the drain pump area.
13. Dry the Area Thoroughly: Wipe up any spilled water to prevent mold growth.

Fix the Issue Without Buying Parts

Before considering replacements, try these free methods:

• Reset the Washer: Unplug the washer for 5-10 minutes and then plug it back in. This can sometimes resolve minor electronic glitches.
• Clean the Washer: Run a cleaning cycle with a washer cleaner to remove soap buildup and debris that can contribute to leaks.
• Recalibrate the Washer: Refer to your owner’s manual for instructions on how to recalibrate the washer’s sensors. This might help with overfilling issues.
• Basic Maintenance: Regularly clean the lint filter and wipe down the inside of the drum to prevent buildup.

When Replacement Might Be Necessary

If the leak persists after trying the above steps, a part might need replacement. The tub seal is a common culprit, but replacing it is a complex job. The water inlet valve or drain pump can also fail. Expect to pay between $50 – $200 for a water inlet valve or drain pump replacement, depending on the model. Tub seal replacement can cost $200 – $400 due to the labor involved. For more related activities, check out our Lg Washer Stop Cycle And Drain.

Safety Warning

• Always unplug the washer from the electrical outlet before performing any maintenance or repairs.
• Turn off the water supply to the washer before disconnecting any hoses.
• Be careful when handling tools to avoid injury.
• Clean up any spilled water immediately to prevent slips and falls.
• If you are uncomfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

• Pliers
• Screwdrivers (Phillips and flathead)
• Adjustable wrench
• Level
• Bucket
• Towels
• Flashlight

FAQ

Here are some frequently asked questions about LG Tromm washer leaks:

• Q: Why is my washer leaking only during the spin cycle?
  A: This often indicates a problem with the tub seal or an issue with the drain pump. The increased pressure during the spin cycle exacerbates the leak.
• Q: Can I use regular household cleaner to clean my washer?
  A: No, it’s best to use a washer cleaner specifically designed for washing machines. This will prevent damage to the components.
• Q: How often should I clean my washer?
  A: You should clean your washer at least once a month, or more frequently if you notice a buildup of soap or mildew.
• Q: What if I can’t find the source of the leak?
  A: If you’ve tried all the troubleshooting steps and still can’t find the source of the leak, it’s best to call a qualified appliance repair technician.

Conclusion

Finding your LG Tromm washer leaking from the back can be worrying, but with a systematic approach, many leaks can be diagnosed and resolved without expensive repairs. Take your time, follow these steps carefully, and remember safety first. If you’re unsure about any step, don’t hesitate to consult a professional. By tackling the problem head-on, you can often save money and extend the life of your appliance. Discover more free resources across our collection library.

Youtube Video: