Whirlpool Side By Side Refrigerator Not Cooling


Whirlpool Side By Side Refrigerator Not Cooling

Introduction

A refrigerator that isn’t cooling properly can lead to spoiled food, wasted money, and a lot of frustration. If your Whirlpool side-by-side refrigerator is running, but the temperature is too high, it’s a problem you need to address quickly. This often happens after a power outage, after loading the refrigerator with a lot of warm food, or simply due to accumulated dust and grime. Don’t worry; you don’t necessarily need to call a repairman right away. This guide provides simple troubleshooting steps to help you diagnose and fix the issue yourself.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Whirlpool Side By Side Refrigerator Not Cooling.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Whirlpool Side by Side Refrigerator Not Cooling

Here are some of the most frequent reasons why your Whirlpool side-by-side refrigerator might not be cooling properly:. For more related activities, check out our Ge Fridge Not Cooling.

  • Dirty Condenser Coils: Dust and debris on the condenser coils can prevent the refrigerator from releasing heat efficiently.
  • Blocked Vents: Obstructions inside the refrigerator can restrict airflow between the freezer and refrigerator compartments.
  • Faulty Door Seals: Worn or damaged door seals allow warm air to enter, making it harder for the refrigerator to stay cold.
  • Defrost System Problem: A malfunctioning defrost system can cause ice buildup, blocking airflow.
  • Condenser Fan Motor Failure: The condenser fan helps cool the condenser coils; if it fails, cooling performance suffers.
  • Evaporator Fan Motor Failure: The evaporator fan circulates cold air inside the refrigerator; if it’s not working, the refrigerator won’t cool evenly.
  • Start Relay Malfunction: The start relay helps start the compressor, and if it’s failing, the compressor may not run properly.
  • Compressor Issues: The compressor is the heart of the cooling system; if it’s failing, the refrigerator will not cool.

Symptoms Checklist

Use this checklist to help accurately identify the problem:

  • Refrigerator temperature is warmer than usual.
  • Freezer temperature is warmer than usual.
  • Food is spoiling faster than normal.
  • You hear the refrigerator running, but it’s not cooling.
  • Ice buildup inside the freezer.
  • Unusual noises coming from the refrigerator.
  • The back of the refrigerator feels warm.

How to Fix Whirlpool Side by Side Refrigerator Not Cooling Step-by-Step Guide

  1. Unplug the Refrigerator: Before you start, unplug the refrigerator from the power outlet for safety.
  2. Clean the Condenser Coils: Locate the condenser coils (usually on the back or bottom of the refrigerator). Use a vacuum cleaner with a brush attachment to remove dust and debris.
  3. Check the Door Seals: Inspect the door seals for cracks, tears, or gaps. Clean them with warm, soapy water to remove any grime. A dollar bill test will confirm seal integrity. Close the door on a dollar bill, and if you can pull it out easily, the seal is weak.
  4. Check for Blocked Vents: Ensure that the vents inside the refrigerator and freezer compartments are not blocked by food items. Rearrange items to allow for proper airflow.
  5. Defrost the Refrigerator: If you suspect ice buildup is the problem, manually defrost the refrigerator. Unplug it and leave the doors open for 24 hours. You can also use a hairdryer (on a low setting) to speed up the process, but be careful not to melt any plastic parts.
  6. Check the Condenser Fan: Locate the condenser fan (near the compressor). Make sure it’s spinning freely and not blocked by debris. If it’s not spinning, it may need to be replaced (consider calling a technician).
  7. Check the Evaporator Fan: Locate the evaporator fan (usually inside the freezer compartment behind a panel). Make sure it’s spinning freely. If it’s not spinning, it may need to be replaced (consider calling a technician).
  8. Check the Temperature Settings: Make sure the temperature settings are correct. Sometimes, someone may have accidentally changed them.
  9. Reset the Refrigerator: After making any adjustments, plug the refrigerator back in and allow it to run for 24 hours to stabilize the temperature.
  10. Listen to the Compressor: The compressor is the workhorse. If you don’t hear it running at all, or it’s making excessive noise, it could be failing. You’ll likely need a professional technician to diagnose and repair the compressor.

Fix the Issue Without Buying Parts

Before resorting to replacing parts, try these free and simple solutions:

  • Reset: Unplug your refrigerator for 30 minutes, then plug it back in. This can sometimes reset the system.
  • Cleaning: Regularly clean the condenser coils and door seals.
  • Airflow: Ensure proper airflow inside the refrigerator by not overpacking it and keeping vents clear.
  • Inspection: Periodically inspect the door seals and vents for any issues.
  • Maintenance: Keep the refrigerator level and ensure it’s not exposed to direct sunlight or excessive heat.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your refrigerator is still not cooling, it’s possible that a major component has failed. The compressor, evaporator fan motor, or defrost system components are common culprits. Compressor replacement can cost between $300 and $700, while evaporator fan motor replacement might range from $100 to $300. At this point, it’s wise to get a professional opinion to assess the overall condition of the refrigerator and determine if the repair cost is worth it, compared to purchasing a new unit.

Safety Warning

  • Always unplug the refrigerator before performing any maintenance or repairs.
  • Avoid working on electrical components if you are not comfortable with electrical work.
  • Be careful when using tools to avoid injury.
  • Keep children and pets away from the work area.
  • Do not use excessive force when removing or installing components.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Vacuum cleaner with brush attachment
  • Warm water and mild soap
  • Clean cloths
  • Hairdryer (optional, for defrosting)

FAQ


Q: Why is my freezer cold, but my refrigerator is warm?
A: This is often caused by blocked vents or a faulty evaporator fan motor.


Q: How often should I clean the condenser coils?
A: It’s recommended to clean the condenser coils every 6 months.


Q: What if my door seals are damaged?
A: Damaged door seals should be replaced to prevent warm air from entering the refrigerator.


Q: How long should I defrost my refrigerator?
A: Allow at least 24 hours for a manual defrost, or until all ice has melted.

Conclusion

Troubleshooting a Whirlpool side-by-side refrigerator that’s not cooling can seem daunting, but by following these steps, you can often diagnose and fix the problem yourself. Remember to start with the simplest solutions first, like cleaning the coils and checking the vents. If you’re still having trouble after trying these steps, it’s best to consult a qualified appliance repair technician. It’s always worth trying to fix it yourself, saving money and learning about your appliance before calling for help!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 1

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 1 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top