Washing Machine Makes Loud Noise When Draining


Washing Machine Makes Loud Noise When Draining

Introduction

A loud, unusual noise coming from your washing machine during the draining cycle can be alarming. It often sounds like a grinding, rattling, or high-pitched whine. This isn’t just annoying; it can indicate a problem that, if left unattended, could lead to more significant damage and costly repairs. The draining process is crucial for removing water after a wash, and any disruption can prevent your clothes from being cleaned properly, or worse, cause leaks. Ignoring the noise might lead to a complete breakdown of your washing machine. Therefore, its important to address the issue as soon as possible.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Washing Machine Makes Loud Noise When Draining.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Washing Machine Makes Loud Noise When Draining

Several factors can contribute to a noisy draining cycle:

  • Foreign Objects: Small items like coins, buttons, or socks can slip through the drum and get lodged in the drain pump.
  • Drain Pump Obstruction: Hair, lint, or other debris can clog the drain pump filter, restricting water flow and causing noise.
  • Worn Drain Pump: Over time, the drain pump motor can wear out, leading to noisy operation.
  • Loose Drain Hose: A drain hose that isnt properly secured can vibrate against the machine or wall, creating a rattling sound.
  • Clogged Drain Hose: Blockages in the drain hose can force the pump to work harder, causing it to make excessive noise.
  • Worn Bearings: While more common during the spin cycle, worn bearings can sometimes contribute to noise during draining if the machine is vibrating excessively.
  • Improper Leveling: An unlevel washing machine can vibrate excessively during all cycles, including draining.
  • Drain Standpipe Issues: If the drain standpipe is too low or too narrow, it can cause the draining water to gurgle loudly.

Symptoms Checklist

Confirming the specific symptoms can help pinpoint the problem:

  • Loud grinding or rattling noise specifically during the drain cycle.
  • Water draining slowly or not at all.
  • The washing machine vibrating excessively during draining.
  • Unusual gurgling sounds coming from the drainpipe.
  • Finding small objects or debris near the drain pump filter.

How to Fix Washing Machine Makes Loud Noise When Draining Step-by-Step Guide

Follow these steps to troubleshoot and fix the noisy draining problem:

  1. Unplug the Washing Machine: Always disconnect the power before performing any maintenance or repairs.
  2. Locate the Drain Pump Filter: This is usually located at the front bottom of the machine, behind a small access panel. Consult your owner’s manual for the exact location.
  3. Prepare for Water: Place a shallow pan or towels under the access panel to catch any water that spills out when you remove the filter.
  4. Remove the Drain Pump Filter: Carefully unscrew or pop out the filter. Be prepared for water to flow out.
  5. Inspect and Clean the Filter: Remove any lint, hair, coins, buttons, or other debris from the filter. Rinse it thoroughly under running water.
  6. Check the Drain Pump Housing: Use a flashlight to look inside the drain pump housing. Remove any visible obstructions, such as small socks or other items.
  7. Reinstall the Drain Pump Filter: Make sure the filter is properly seated and secured.
  8. Inspect the Drain Hose: Disconnect the drain hose from the back of the washing machine and the drainpipe. Check for kinks, clogs, or obstructions.
  9. Flush the Drain Hose: Use a garden hose to flush out any debris from the drain hose.
  10. Check the Drain Standpipe: Ensure the drain standpipe is tall enough (at least 30 inches) and wide enough (at least 2 inches in diameter).
  11. Reconnect the Drain Hose: Securely reattach the drain hose to the washing machine and the drainpipe. Ensure the connections are tight.
  12. Level the Washing Machine: Use a level to check if the washing machine is level. Adjust the leveling feet at the bottom of the machine until it sits evenly.
  13. Plug in the Washing Machine: Reconnect the power cord.
  14. Run a Test Cycle: Run a short wash and drain cycle to see if the noise is gone.

Fix the Issue Without Buying Parts

Before considering replacement parts, try these free methods:

  • Reset the Machine: Unplug the washing machine for a few minutes, then plug it back in. This can sometimes reset the control panel and resolve minor issues.
  • Cleaning Cycle: Run a washing machine cleaner through a cleaning cycle to remove buildup and debris.
  • Recalibration: Some washing machines have a recalibration setting. Consult your owner’s manual for instructions on how to recalibrate the machine.
  • Regular Inspection: Regularly check and clean the drain pump filter to prevent clogs.
  • Proper Loading: Avoid overloading the washing machine, as this can strain the drain pump and other components.

When Replacement Might Be Necessary

If the noise persists after cleaning and inspecting the drain pump and hose, the drain pump motor itself may be failing. A new drain pump can cost between $50 and $200 USD. If the bearings are the source of the noise, the repair is more complex and may require professional assistance. Bearing replacement can cost between $150 and $400 USD, depending on the machine and labor costs. For more related activities, check out our Whirlpool Front Load Washer Won T Spin Fast.

Safety Warning

  • Always unplug the washing machine before performing any maintenance or repairs.
  • Be careful when handling water, especially near electrical components.
  • Wear gloves to protect your hands from sharp objects or debris.
  • Clean up any spills immediately to prevent slips and falls.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Shallow pan or towels
  • Flashlight
  • Garden hose
  • Level
  • Gloves

FAQ


Q: Why is my washing machine making a loud noise only when draining?
A: It’s likely due to an obstruction in the drain pump or drain hose, a worn drain pump motor, or an issue with the drain standpipe.


Q: How often should I clean the drain pump filter?
A: Ideally, you should clean the drain pump filter every 1-3 months, or more frequently if you notice slow draining or unusual noises.


Q: Can a clogged drain hose cause a noisy draining cycle?
A: Yes, a clogged drain hose can restrict water flow and cause the pump to work harder, resulting in noise.


Q: Is it safe to run the washing machine if it’s making a loud noise when draining?
A: It’s best to avoid running the washing machine until you’ve identified and resolved the cause of the noise to prevent further damage.

Conclusion

Troubleshooting a noisy washing machine drain can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Remember to prioritize safety and take your time. If you’re not comfortable performing these tasks, or if the problem persists after troubleshooting, it’s always best to consult with a qualified appliance repair technician.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top