Washing Machine Knocking Noise When Spinning


Washing Machine Knocking Noise When Spinning

Introduction

A knocking noise coming from your washing machine during the spin cycle can be quite alarming. This usually means something is not right and could lead to further damage if ignored. The noise often occurs when the machine is trying to spin at high speeds to extract water from your clothes. While it may seem like a minor annoyance, it’s important to address this issue promptly to prevent more costly repairs down the line and to ensure your washing machine continues to operate efficiently.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Washing Machine Knocking Noise When Spinning.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Washing Machine Knocking Noise When Spinning

Here are some of the most common reasons why your washing machine might be making a knocking noise during the spin cycle:. For more related activities, check out our Whirlpool Front Load Washer Won T Spin Fast.

  • Unbalanced Load: Clothes clumped together on one side of the drum can cause the machine to shake and knock.
  • Overloaded Machine: Trying to wash too many clothes at once can strain the machine and cause knocking.
  • Loose Items: Coins, buttons, or other small objects trapped inside the drum or between the drum and the outer tub can create a knocking sound.
  • Worn Drum Bearings: Damaged or worn bearings can cause the drum to wobble and knock against other components.
  • Suspension Rod Issues: Washing machines use suspension rods to keep the drum stable. If these rods are worn or broken, the drum can move excessively and knock.
  • Damaged Drive Pulley: The drive pulley helps turn the drum. If it’s damaged or loose, it can cause the drum to wobble and create noise.
  • Shipping Bolts Still Attached: If the machine is new, make sure shipping bolts at the back are removed. They prevent drum movement during transit but cause severe knocking during operation.
  • Foreign Object Obstruction: Socks, or other small garment may get stuck between the spinning drum and stationary outer tub.

Symptoms Checklist

Use this checklist to help pinpoint the cause of the knocking noise:

  • Does the knocking noise only occur during the spin cycle?
  • Does the machine shake violently when it knocks?
  • Have you recently washed a particularly heavy load?
  • Have you checked for loose items in the drum?
  • Is the noise getting progressively worse over time?
  • Is your washing machine new? Have you removed the shipping bolts?

How to Fix Washing Machine Knocking Noise When Spinning Step-by-Step Guide

Follow these steps to troubleshoot and fix the knocking noise:

  1. Unplug the Washing Machine: Always disconnect the power before attempting any repairs.
  2. Check for an Unbalanced Load: Stop the machine and redistribute the clothes evenly around the drum.
  3. Reduce the Load Size: If the machine is overloaded, remove some items and try again.
  4. Inspect the Drum for Loose Items: Carefully check the drum and the rubber seal around the opening for any trapped objects.
  5. Check the Pockets of Clothes: Before washing, always check all pockets for coins, keys, or other small items.
  6. Ensure the Washing Machine is Level: Use a level to check if the machine is sitting evenly on the floor. Adjust the leveling feet as needed.
  7. Remove and Inspect the Shipping Bolts (If New): Locate and remove the shipping bolts from the back of the machine according to the manufacturer’s instructions.
  8. Manually Rotate the Drum: With the machine unplugged, try rotating the drum by hand. Listen for any unusual noises or resistance.
  9. Inspect the Suspension Rods (If Accessible): If you can access the suspension rods (usually located at the top of the machine), check them for any signs of damage or wear.
  10. Check the Drive Pulley (If Accessible): Inspect the drive pulley for looseness or damage. It is usually located at the back, bottom of machine and connect to the drum via belt.
  11. Run an Empty Wash Cycle: Run the machine empty with some washing machine cleaner to dislodge any hidden debris.
  12. Clean the Drain Pump Filter: A clogged drain pump filter can cause vibrations. Locate and clean it according to the manufacturer’s instructions.
  13. Listen Carefully: After each step, run a test spin cycle (with a small load) to see if the noise is gone.

Fix the Issue Without Buying Parts

Here are some free methods to try before considering part replacements:

  • Reset the Machine: Unplug the washing machine for 5-10 minutes and then plug it back in. This can sometimes reset the control board and resolve minor issues.
  • Clean the Machine Regularly: Run a cleaning cycle with vinegar or a washing machine cleaner every month to prevent buildup and debris.
  • Recalibrate the Machine (If Applicable): Some washing machines have a calibration mode. Consult your owner’s manual for instructions.
  • Inspect the Surrounding Area: Make sure nothing is touching or leaning against the washing machine that could cause vibrations.
  • Proper Loading Techniques: Always load the washing machine evenly and avoid overloading it.

When Replacement Might Be Necessary

If the knocking persists after trying the above steps, it might indicate a more serious issue requiring part replacement. Common parts that can fail include:

  • Drum Bearings: Replacing drum bearings can be labor-intensive and the cost can range from $150 to $400.
  • Suspension Rods: Replacing suspension rods is usually less expensive, costing between $50 and $150.
  • Drive Pulley: A replacement drive pulley might cost from $30 to $100.

If you’re not comfortable replacing these parts yourself, it’s best to consult with a qualified appliance repair technician.

Safety Warning

  • Always unplug the washing machine before attempting any repairs.
  • Avoid working on the machine if the floor is wet to prevent electric shock.
  • Be careful when lifting or moving heavy parts to avoid injury.
  • If you’re unsure about any step, consult a qualified technician.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Adjustable wrench
  • Pliers
  • Level
  • Gloves

FAQ


Q: Why does my washing machine only knock during the spin cycle?
A: The spin cycle involves high speeds, which can exacerbate any existing imbalance or mechanical issue, leading to the knocking noise.


Q: Can an unbalanced load really cause a knocking noise?
A: Yes, an unbalanced load is one of the most common causes. Redistributing the clothes usually resolves the issue.


Q: How often should I clean my washing machine?
A: It’s recommended to clean your washing machine at least once a month to prevent buildup and maintain optimal performance.


Q: When should I call a professional repair technician?
A: If you’ve tried all the troubleshooting steps and the knocking noise persists, or if you’re uncomfortable performing repairs yourself, it’s best to call a professional.

Conclusion

A knocking washing machine during the spin cycle can be concerning, but with a systematic approach, you can often identify and resolve the issue yourself. Start with the simple steps, such as checking for an unbalanced load and removing any loose items. If the problem persists, don’t hesitate to seek professional help. By taking proactive steps, you can keep your washing machine running smoothly and avoid costly repairs.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top