Introduction
A washing machine that refuses to drain completely is a frustrating problem. It leaves your clothes sitting in water, creating a potential for mold and mildew growth. It often happens after a particularly large load, or when washing items that shed a lot of lint or debris. Addressing this issue promptly is important to prevent damage to your washing machine and avoid unpleasant odors in your laundry room.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Washer Not Draining Completely.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Washer Not Draining Completely
Here are some of the most common reasons why your washer might not be draining properly:
- Clogged Drain Hose: The drain hose can become blocked with lint, small objects (like socks!), or soap residue.
- Clogged Drain Pump Filter: Most washing machines have a filter near the drain pump to catch debris. If this filter is clogged, it can prevent water from draining.
- Blocked Drainpipe: The pipe where your drain hose connects to the wall can become clogged.
- Faulty Drain Pump: The drain pump is responsible for pushing the water out of the washer. If it’s failing, it may not be strong enough to empty the drum.
- Kinked or Bent Drain Hose: A kink in the drain hose can restrict water flow.
- Air Lock in Drain Hose: An air lock can prevent the drain pump from working effectively.
- Lid Switch Problem: Some washing machines won’t drain if the lid switch isn’t functioning correctly. This switch detects whether the lid is closed.
- Control Panel Malfunction: In rare cases, a problem with the washing machine’s control panel can prevent it from initiating the drain cycle.
Symptoms Checklist
Here are some indicators to help you confirm the problem:
- Clothes are soaking wet after the wash cycle.
- Standing water remains in the washing machine drum.
- The washing machine makes a humming noise but doesn’t drain.
- Error codes related to draining are displayed on the control panel.
- The drain hose is visibly bulging or kinked.
How to Fix Washer Not Draining Completely Step-by-Step Guide
Follow these steps to troubleshoot and resolve the draining issue:
- Unplug the Washer: For safety, always unplug the washing machine from the power outlet before starting any repairs.
- Check the Drain Hose for Kinks: Inspect the entire length of the drain hose for any kinks, bends, or obstructions. Straighten out any kinks you find.
- Detach the Drain Hose: Carefully detach the drain hose from both the washing machine and the drainpipe in the wall.
- Flush the Drain Hose: Run water through the drain hose to flush out any clogs. You can use a garden hose or a sink faucet. If theres a severe blockage, use a long, flexible brush to dislodge it.
- Check the Drainpipe: Insert the drain hose into the drainpipe in the wall only a few inches. Ensure it is not a very tight fit, which could create a siphoning effect. Run the water, making sure the pipe is not blocked. If the water flows out freely, the drainpipe is clear. If not, you may need to call a plumber.
- Locate the Drain Pump Filter: Consult your washing machine’s manual to find the location of the drain pump filter. It’s usually located at the front, near the bottom of the machine, behind a small access panel.
- Drain Remaining Water (Carefully!): Before removing the filter, place a shallow pan or towels underneath to catch any remaining water that will spill out.
- Remove and Clean the Drain Pump Filter: Unscrew or unclip the filter cover. Remove the filter and clean it thoroughly under running water. Remove any lint, hair, coins, or other debris.
- Reinstall the Drain Pump Filter: Place the cleaned filter back into its housing and secure the cover tightly.
- Reattach the Drain Hose: Reconnect the drain hose to both the washing machine and the drainpipe. Make sure the connections are secure.
- Check the Lid Switch: If your washer has a lid switch, make sure it’s functioning correctly. Manually depress the switch (with the washer unplugged!) to see if it moves freely. If it seems stuck or broken, it might be the problem. (Testing this further requires a multimeter and knowledge of electrical testing, so consider calling a technician).
- Run a Test Cycle: Plug the washing machine back in and run a short wash cycle to test if it drains properly. Observe the drain hose and the drainpipe to ensure there are no leaks.
- Check for Error Codes: If the machine displays an error code during the cycle, consult your manual to determine the cause and solution. Some error codes can be cleared by resetting the machine (see below).
Fix the Issue Without Buying Parts
Here are some things to try that don’t require buying new parts:
- Reset the Washing Machine: Unplug the washer for 1-2 minutes, then plug it back in. This can sometimes reset the control panel and resolve minor glitches.
- Run a Cleaning Cycle: Many washing machines have a self-cleaning cycle. Run this cycle with a washing machine cleaner to remove buildup and debris.
- Check the Leveling: Ensure the washing machine is level. An unlevel machine can sometimes have draining problems. Use a level and adjust the feet of the machine if necessary.
- Regular Maintenance: Run a washing machine cleaner through the machine monthly to prevent buildup. Clean the drain pump filter regularly.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and your washer still won’t drain, the drain pump might be faulty. A replacement drain pump typically costs between $50 and $200 USD, depending on the model of your washing machine. Other less common, but more expensive parts to replace include the lid switch ($30-$80 USD) and the control panel ($150-$400 USD). Before replacing any parts, it’s often a good idea to consult with a qualified appliance repair technician to get an accurate diagnosis.
Safety Warning
- Always unplug the washing machine before performing any maintenance or repairs.
- Be careful when handling water to avoid slips and falls. Wipe up any spills immediately.
- If you’re not comfortable working with electrical components, consult a qualified technician.
- When testing the draining cycle, keep an eye on the drain hose and connections to prevent leaks.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Shallow pan or towels
- Bucket
- Garden hose or sink faucet
- Flexible brush (for cleaning the drain hose)
- Level
FAQ
Here are some frequently asked questions about washing machine draining problems:
-
Q: Why is my washing machine making a humming noise but not draining?
A: This usually indicates a problem with the drain pump. The pump might be clogged or failing. Check the drain pump filter first. -
Q: How often should I clean the drain pump filter?
A: It’s recommended to clean the drain pump filter every 1-3 months, depending on how frequently you use your washing machine. -
Q: Can I use bleach to clean the washing machine?
A: Yes, you can use bleach to clean the washing machine, but follow the manufacturer’s instructions. Many machines also have a cleaning cycle that is optimized for use with special washing machine cleaners. -
Q: What if I can’t find the drain pump filter?
A: Consult your washing machine’s manual. The location of the drain pump filter can vary depending on the model. If you can’t find the manual, search online using your model number.
Conclusion
A washing machine that won’t drain completely can be a major inconvenience, but by following these troubleshooting steps, you can often resolve the issue yourself. Start with the simple solutions like checking the drain hose and cleaning the filter. Remember to always prioritize safety by unplugging the machine before working on it. If you’ve exhausted all the DIY options and the problem persists, don’t hesitate to call a qualified appliance repair technician. They have the expertise to diagnose and fix more complex issues.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 1 section for step-by-step troubleshooting solutions.
