Samsung Wf316las Xaa Not Draining

Introduction

Is your Samsung WF316LAS/XAA washing machine refusing to drain, leaving you with a drum full of water? This is a common problem, but it can be frustrating. A washing machine that won’t drain can lead to mold growth, unpleasant odors, and prevent you from doing your laundry. Addressing this issue quickly is important to prevent further damage and get your laundry routine back on track. Don’t worry, you can often fix this yourself with some simple troubleshooting steps before calling a repair technician.

Common Causes of samsung wf316las xaa not draining

Here are some of the most frequent reasons why your Samsung WF316LAS/XAA might not be draining:

• Clogged Drain Hose: The hose that carries water away from the machine can become blocked with lint, debris, or small objects.
• Blocked Drain Pump Filter: This filter catches lint and small items to prevent them from damaging the drain pump. It can become clogged over time.
• Drain Pump Malfunction: The drain pump itself might be failing or have a blockage.
• Clogged Drainpipe: The pipe that the washing machine drain hose connects to can be clogged.
• Air Lock in the Drain Hose: Sometimes air can get trapped in the drain hose, preventing the water from flowing freely.
• Faulty Lid Switch: Although less common, a faulty lid switch can sometimes prevent the drain cycle from starting.
• Control Board Issue: In rare cases, a problem with the washing machine’s control board can prevent the drain cycle from activating.
• Kinked or Twisted Drain Hose: A simple kink in the hose can restrict water flow.

Symptoms Checklist

Here are some signs that your Samsung WF316LAS/XAA washing machine is having draining issues:

• The washing machine cycle completes, but water remains in the drum.
• The washing machine makes a humming or buzzing noise during the drain cycle, but no water is pumped out.
• The washing machine displays an error code related to draining (check your user manual for specific codes).
• The washing machine drains very slowly.
• The washing machine is completely unresponsive during the drain cycle.

How to Fix samsung wf316las xaa not draining Step-by-Step Guide

1. Unplug the Washing Machine: For your safety, always disconnect the power cord before working on the appliance.
2. Locate the Drain Hose: This is usually at the back of the machine.
3. Inspect the Drain Hose for Kinks or Twists: Straighten out any kinks or twists that you find.
4. Detach the Drain Hose: Carefully detach the hose from the drainpipe (or standpipe). Have a bucket ready to catch any remaining water.
5. Check the Drainpipe for Clogs: Use a plumber’s snake or a straightened coat hanger to clear any clogs in the drainpipe.
6. Locate the Drain Pump Filter: This is usually located at the bottom front of the machine, behind a small access panel.
7. Prepare for Water Spillage: Place a shallow pan or towels under the access panel to catch any water that may spill out.
8. Open the Drain Pump Filter Access Panel: Use a screwdriver or your fingers to open the access panel.
9. Remove the Drain Pump Filter: Carefully unscrew or pull out the drain pump filter.
10. Clean the Drain Pump Filter: Remove any lint, debris, or small objects from the filter. Rinse it thoroughly with water.
11. Inspect the Drain Pump: Look inside the drain pump housing for any obstructions. You may need a flashlight. If you see anything, carefully remove it with tweezers or pliers.
12. Reinstall the Drain Pump Filter: Make sure the filter is securely in place.
13. Reattach the Drain Hose: Connect the drain hose back to the drainpipe.
14. Plug in the Washing Machine: Reconnect the power cord.
15. Run a Test Cycle: Select a drain and spin cycle to test if the washing machine is now draining properly.

Fix the Issue Without Buying Parts

Before you consider replacing any parts, try these free methods:

• Reset the Washing Machine: Unplug the washing machine for 5-10 minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
• Deep Clean the Washing Machine: Run an empty cycle with a washing machine cleaner or a cup of white vinegar to remove buildup that could be contributing to the problem.
• Inspect the Tub-to-Pump Hose: This hose connects the washing machine tub to the drain pump. Check it for kinks or clogs.
• Check the venting for Siphon Issues: Your standpipe (the pipe the drain hose goes into) needs proper venting to prevent siphoning. Make sure the drain hose isn’t pushed too far down, which can block airflow.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washing machine still won’t drain, you might need to replace a part. The most common part to fail is the drain pump. A new drain pump typically costs between $50 and $150 USD, depending on the brand and retailer. Other less common, but potential replacement parts are the drain hose itself ($15 – $30 USD) or in a rare case, the main control board which can range from $150 to $300 USD. Consider contacting a qualified appliance repair technician for diagnosis and repair if you are not comfortable replacing parts yourself.

Safety Warning

• Always unplug the washing machine before performing any troubleshooting or repairs.
• Be careful when handling water to avoid electric shock.
• Be mindful of potential water spillage to prevent slips and falls.
• Do not attempt to repair the washing machine if you are not comfortable working with electrical appliances. Call a qualified technician.

Tools You May Need

• Screwdriver (Phillips and flathead)
• Pliers
• Bucket or shallow pan
• Towels
• Flashlight
• Plumber’s snake or straightened coat hanger
• Gloves (optional)

FAQ

1. Q: My washing machine is making a humming noise but not draining. What does this mean?
   A: This usually indicates that the drain pump is trying to work but is blocked by something. Check the drain pump filter for clogs.
2. Q: How often should I clean the drain pump filter?
   A: It’s a good idea to clean the drain pump filter every 1-3 months, depending on how often you use your washing machine.
3. Q: What if I can’t get the drain pump filter open?
   A: Try using a pair of pliers to gently grip and turn the filter cap. If it’s still stuck, you may need to call a technician.
4. Q: I’ve cleaned everything, but my washing machine still won’t drain. What else can I try?
   A: Double-check the drain hose for any hidden kinks or obstructions. You can also try running a drain and spin cycle with the drain hose disconnected to see if the pump is actually pushing water out.

Conclusion

Troubleshooting a washing machine that won’t drain can seem daunting, but by following these simple steps, you can often fix the problem yourself and save money on repair costs. Remember to prioritize safety and take your time. If you’ve exhausted all the DIY options and your Samsung WF316LAS/XAA is still refusing to drain, it’s time to call a qualified appliance repair technician for professional assistance.

Youtube Video: