Samsung Washer Has Water In Drum

Introduction

Finding water lingering in your Samsung washing machine drum after a completed cycle is a common and concerning issue. It’s not only inconvenient, preventing you from immediately transferring clothes to the dryer, but it can also lead to unpleasant odors and potential mold growth inside the washer. This situation often occurs when the washer’s draining system isn’t working correctly. Addressing this promptly is crucial to prevent further damage to your appliance and maintain a clean and healthy laundry environment.

Common Causes of Samsung Washer Has Water in Drum

Several factors can contribute to water remaining in your Samsung washer drum:

Clogged Drain Hose: The drain hose, responsible for expelling water, can become blocked with lint, debris, or small objects.
Blocked Drain Pump Filter: The drain pump filter traps lint and debris to prevent them from damaging the pump. A clogged filter restricts water flow.
Faulty Drain Pump: The drain pump may fail, preventing it from effectively pumping water out of the drum.
Obstructed Drainpipe: The drainpipe where the washer’s hose connects can become clogged, hindering drainage.
Kinked or Damaged Drain Hose: A kink in the hose restricts water flow. Damage can cause leaks and drainage issues.
Air Lock in Drain Hose: Air trapped in the drain hose can prevent proper water flow.
Incorrect Hose Installation: If the drain hose isn’t installed at the correct height, water may not drain effectively.
Pressure Switch Malfunction: The pressure switch senses the water level. If faulty, it may not signal the washer to drain.

Symptoms Checklist

Look for these indicators to confirm the problem:

Standing water visible in the drum after the wash cycle ends.
Clothes are soaking wet even after the spin cycle.
The washer makes unusual noises during the drain cycle.
Error codes displayed on the washer’s control panel related to draining.
Slow or incomplete draining of water.

How to Fix Samsung Washer Has Water in Drum Step-by-Step Guide

Follow these steps to troubleshoot the issue:

Unplug the Washer: For safety, always disconnect the washer from the power outlet before starting any repairs.
Locate the Drain Hose: It’s usually at the back of the washer.
Inspect the Drain Hose for Kinks: Straighten any kinks to ensure a clear path for water flow.
Detach the Drain Hose from the Drainpipe: Carefully remove the hose to check for clogs.
Check the Drainpipe: Shine a flashlight into the drainpipe to look for obstructions. Use a wire hanger or plumbing snake to clear any blockages.
Locate the Drain Pump Filter: This is usually at the bottom front of the washer, behind a small access panel. Consult your washer’s manual for the exact location.
Drain Remaining Water (if any): Place a shallow pan or towel beneath the access panel to catch any water that spills out.
Remove the Drain Pump Filter: Unscrew or unclip the filter cover and carefully remove the filter.
Clean the Drain Pump Filter: Rinse the filter under running water to remove lint, hair, and other debris. Use a soft brush to scrub stubborn buildup.
Inspect the Drain Pump Housing: With the filter removed, check inside the pump housing for any obstructions.
Reinstall the Drain Pump Filter: Securely reattach the filter and close the access panel.
Check the Drain Hose Connection: Ensure the drain hose is properly connected to the drainpipe.
Run a Test Cycle: Select a short wash and drain cycle to see if the washer drains properly.
Listen for Unusual Noises: Pay attention to any unusual sounds coming from the drain pump during the drain cycle.
Check for Error Codes: See if any error codes appear on the display panel after the test cycle.

Fix the Issue Without Buying Parts

Sometimes, you can resolve the issue without replacing any components:

Washer Reset: Unplug the washer for 5 minutes, then plug it back in. This can sometimes reset the control board and resolve minor glitches.
Washer Cleaning Cycle: Run a washer cleaning cycle with a washing machine cleaner to remove buildup and debris from the drum and internal components.
Recalibration (If Applicable): Some Samsung washers have a calibration cycle. Consult your user manual to see if your model has this feature and how to perform it.
Inspect the Tub for Foreign Objects: Occasionally small items fall into the tub and lodge in the drain system.
Regular Maintenance: Regularly clean the drain pump filter (every 1-3 months) and run a cleaning cycle to prevent buildup.

When Replacement Might Be Necessary

If the above steps don’t solve the problem, the drain pump itself might be faulty and need replacement. A new drain pump can cost between $50 and $150 USD, depending on the model. Other commonly failing parts include the pressure switch (sensing water level) and the drain hose (if severely damaged). Seek professional advice if you are unsure about replacing parts yourself.

Safety Warning

Always unplug the washer before attempting any repairs.
Avoid working on electrical appliances with wet hands or on wet floors.
Be careful when handling tools to avoid injury.
If you are uncomfortable with any step, seek help from a qualified technician.

Tools You May Need

Screwdrivers (Phillips and flathead)
Pliers
Flashlight
Shallow pan or towels
Wire hanger or plumbing snake
Soft brush

FAQ

Here are some frequently asked questions:

Q: Why is my Samsung washer not draining completely? A: Possible causes include a clogged drain hose, blocked drain pump filter, or a faulty drain pump.
Q: How often should I clean the drain pump filter? A: It’s recommended to clean it every 1-3 months, depending on usage.
Q: Can I use bleach to clean my washing machine? A: Yes, but use it sparingly and always follow the manufacturer’s instructions.
Q: What does an error code related to draining mean? A: Consult your washer’s user manual to identify the specific meaning of the error code and recommended solutions.
Q: My washer drained slowly then stopped. What should I do? A: Unplug the machine immediately and check the drain hose for kinks or obstructions. If none exist, check the drain pump filter.

Conclusion

Troubleshooting a Samsung washer with water in the drum can be a straightforward process if you follow these steps. By checking for simple clogs and performing basic maintenance, you can often resolve the issue yourself and save on repair costs. If the problem persists after attempting these solutions, it might be time to consult a qualified appliance technician. Don’t hesitate to seek professional assistance when needed!