Samsung Front Load Not Spinning

Introduction

A washing machine that won’t spin is a frustrating problem! If your Samsung front load washer isn’t spinning, your clothes will be soaking wet after the wash cycle. This can lead to mold and mildew issues in your clothes and washer if not addressed quickly. The lack of spinning usually means your clothes aren’t getting properly cleaned and you’re left with a pile of damp laundry. Let’s troubleshoot this issue and get your washer back in working order. Explore more in our Washing Machine Problems 5 collection.

Common Causes of samsung front load not spinning

Here are some of the most common reasons why your Samsung front load washer might not be spinning:. For more related activities, check out our Samsung Front Load Washer Not Turning On.

• Overloading: Putting too many clothes in the washer can prevent it from spinning properly.
• Unbalanced Load: If the clothes are bunched up on one side of the drum, it can throw the washer off balance.
• Clogged Drain Pump Filter: A blocked filter can prevent the water from draining, which stops the spin cycle.
• Drain Hose Issues: Kinks or clogs in the drain hose can prevent water from draining, hindering the spin cycle.
• Faulty Lid Switch/Door Lock: If the door isn’t properly locked, the washer won’t spin for safety reasons.
• Worn Drive Belt: A worn or broken belt can prevent the motor from turning the drum.
• Motor Problems: A failing motor might not have the power to spin the drum, though this is less common.
• Control Board Issues: In rare cases, a malfunctioning control board can prevent the spin cycle from starting.
• Too much detergent: Using too much soap can cause the cycle to stop spinning if excessive suds are present.

Symptoms Checklist

Here are some indicators to help you determine why your Samsung front load washer won’t spin:

• Washer completes the wash cycle, but clothes are soaking wet.
• You hear the washer making noises, but the drum isn’t turning.
• The washer displays an error code related to spinning or draining.
• The washer stops mid-cycle.
• You can hear the drain pump running, but water isn’t draining.
• The door won’t unlock after the wash cycle.

How to Fix samsung front load not spinning Step-by-Step Guide

Follow these steps to troubleshoot your Samsung front load washer:

1. Unplug the Washer: Before starting any repairs, unplug the washer from the power outlet for safety.
2. Check for Overloading: Remove some clothes if the washer is overloaded. A good rule of thumb is to leave about a hand’s width of space at the top of the drum.
3. Rearrange the Load: Make sure the clothes are evenly distributed in the drum. Untangle any bunched-up items.
4. Check the Drain Hose: Inspect the drain hose for any kinks, bends, or clogs. Straighten any kinks and remove any visible blockages.
5. Clean the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the washer). Remove the access panel, carefully drain any remaining water, and unscrew the filter. Clean the filter thoroughly and replace it.
6. Check the Door Lock/Lid Switch: Inspect the door lock mechanism for any damage or obstructions. Try opening and closing the door firmly to ensure it’s properly engaged. If you know where it is, check the switch with a multimeter to make sure it is still working.
7. Run a Rinse and Spin Cycle: After checking the basics, try running a rinse and spin cycle to see if the washer spins properly.
8. Check for Error Codes: If the washer displays an error code, consult your owner’s manual to understand its meaning and recommended solutions.
9. Check the Drive Belt: (If you are comfortable) Locate the drive belt at the back of the washer. Inspect it for wear, cracks, or breaks. If the belt is damaged, it will need to be replaced (though we will not cover this right now).
10. Listen for Motor Sounds: During the spin cycle, listen for any unusual noises coming from the motor. A humming or grinding sound could indicate a motor problem.
11. Check for Proper Drainage: Observe if the water is draining properly during the rinse and spin cycle. If the water is not draining, there may be a blockage in the drain pump or drain hose.
12. Try a Calibration Cycle: Some Samsung washers have a calibration cycle that can help reset the machine and resolve minor issues. Consult your owner’s manual for instructions on how to run a calibration cycle.

Fix the Issue Without Buying Parts

Here are some free and easy things you can try before considering any parts replacement:

• Reset the Washer: Unplug the washer for 5-10 minutes, then plug it back in. This can sometimes reset the control board and resolve minor glitches.
• Clean the Washer: Run a washer cleaning cycle with a washing machine cleaner to remove any buildup of detergent or debris.
• Recalibrate the Washer: Look in your owner’s manual for the recalibration or diagnostic cycle. This helps the machine to re-learn.
• Inspect Hoses: Visually inspect all hoses for kinks, bulges, or leaks.
• Maintenance: Regularly clean the drain pump filter and wipe down the door seal to prevent buildup and blockages.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your Samsung front load washer still isn’t spinning, it might be time to consider replacing parts. Parts commonly failing include the drain pump, motor, or control board. Replacement costs can range from $50 to $300+ depending on the part and your location. Discover more free resources across our collection library.

Safety Warning

• Always unplug the washer from the power outlet before performing any repairs.
• Be careful when draining water from the washer to avoid spills and wet floors.
• If you’re not comfortable working with electrical components, consult a qualified appliance repair technician.

Tools You May Need

• Screwdriver set (Phillips and flathead)
• Pliers
• Towels (for cleaning up spills)
• Bucket (for draining water)
• Multimeter (optional, for testing electrical components)

FAQ

Here are some frequently asked questions about Samsung front load washers not spinning:

Q: My washer displays an “UE” or “Unbalanced Load” error. What does this mean?

A: This error indicates that the load is unbalanced. Try rearranging the clothes in the drum and running the spin cycle again.

Q: How often should I clean the drain pump filter?

A: It’s recommended to clean the drain pump filter every 1-3 months, depending on how often you use the washer.

Q: Can I use a regular household cleaner to clean the washing machine?

A: No, it’s best to use a washing machine cleaner specifically designed for cleaning washing machines.

Q: What do I do if the door is stuck and won’t open?

A: Try unplugging the washer for a few minutes to reset the door lock mechanism. If that doesn’t work, you may need to manually release the door lock (consult your owner’s manual).

Conclusion

Troubleshooting a Samsung front load washer that won’t spin can seem daunting, but by following these steps, you can often resolve the issue yourself. Remember to start with the simplest solutions first, such as checking for overloading or clogs. If you’ve exhausted all the troubleshooting steps and are still having problems, it might be time to call a qualified appliance repair technician for assistance. However, attempt to fix before you spend money!

Youtube Video: