Radiator Fan Only Turns On When Ac Is On: Troubleshooting Guide
The radiator fan in a car only turns on when the AC is running. This is a normal phenomenon and does not indicate a problem. The AC compressor generates heat, and the radiator fan helps to cool it down. When the AC is off, the radiator fan is not needed as there is no heat to dissipate.
In the scorching heat of summer, your car’s air conditioning becomes your savior. As you turn it on, you expect not only a refreshing breeze but also the comforting hum of the radiator fan.
But what if I told you that your radiator fan only turns on when the AC is running? Yes, you heard that right. This peculiar phenomenon can leave car owners scratching their heads, wondering if something is amiss under the hood.
Don’t panic just yet. This troubleshooting guide is here to shed light on this puzzling situation and help you regain control over your vehicle’s cooling system. By understanding the underlying causes and following the step-by-step solutions, you can ensure that your radiator fan operates as it should, preventing any potential overheating issues.
So, fasten your seatbelts as we embark on a journey to unravel the mystery of the radiator fan that dances to the rhythm of the air conditioning.
- The car radiator fan unit is a part of the car’s cooling system and is controlled by a thermostat switch or the vehicle. The role of the fan is to help blow cooling air into the radiator when the coolant level rises above a certain temperature. Over time, they begin to wear and may be impacted by stones and other contaminants. With these fan mounting repair kits, replacing the fan unit has never been easier.
- Fan mounting kit compatible for transmission coolers and electric fans.
- Equipped with protective springs: The set contains 4 protective springs, which can prevent the bottom of the installation from breaking.
- Fast and effective installation saves you valuable time.
- Included in the package: 4 X nylon mounting rod, 8 X foam pad, 4 X spring, 4 X fixed buckle.
- Adjustable electric fan thermostat temperature controller with bracket.
- Probe measures liquid or contact temperature and powers electric fan.
- Flexible 32-248’F degree turn-on/off temperature dial controller range.
- 3-pins allows thermostat to function as a normally open or closed circuit.
- Probe can be mounted between radiator fins or inside inlet/outlet tube.
- J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 13 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen/Audi, Mercedes-Benz, and BMW, enjoy dealership-level functions at your fingertips
- All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease
- Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON’s dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
- Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
- Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously – CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don’t provide extra OE software
- Dual Fan Replacement
- White Plastic Fan Blade
- Black Plastic Shroud
- Fan 1 Blade Quantity – 7 Blades, Fan 2 Blade Quantity -5 Blades, Fan Quantity – 2
- Dual Fan Replacement
- White Plastic Fan Blade
- Black Plastic Shroud
- Fan 1 Blade Quantity – 5 Blades, Fan 2 Blade Quantity -7 Blades, Fan Quantity – 2
- Dual Fan Replacement
- White Plastic Fan Blade
- Black Plastic Shroud
- Fan 1 Blade Quantity – 5 Blades, Fan 2 Blade Quantity -5 Blades, Fan Quantity – 2
- affordable proucdts
- Haynes (Author)
- English (Publication Language)
- 320 Pages – 05/02/2005 (Publication Date) – Haynes Manuals N. America, Inc. (Publisher)
- 【KINGBOLEN EDIAG Plus Bi-directional Control Bluetooth Scanner】KINGBOLEN Ediag Plus Bluetooth Scanner (Upgraded version of thinkdaig/ediag)equipped with 15+ resets, ECU coding, K-e-y Matching, Bi-directional test, CAN-FD Protocol, Auto-VIN, full systems diagnosis, one year F-ree update. Bluetooth connection makes your phone becomes a smart diagnostic scanner with wider working range and you can operate the device conveniently.
- 【Full Systems Diagnostic Tool】As an OE-Level full systems diagnostic tool, KINGBOLEN Ediag plus supports read/clear fault codes, read live data, view 4-in-1 live data of in text & graph, ECU information, read control module information, actuation tests and maintenance functions for ECM, ABS, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc..The diagnosis report reveals the fault codes fast, helps you located the related components efficiently.
- 【15+ Special Service Functions】KINGBOLEN EDIAG plus obd2 scanner diagnostic tool covers almost all commonly used maintenance: Oil Light Reset, Battery Reset, SAS Calibration, Injector Coding, I-MM-O Matching, TPMS Reset, ABS Bleeding, Electronic Throttle Learning, Headlight Matching, Sunroof Initialization, Suspension Matching, Transmission Learning and more advanced functions can be found in the car model.
- 【ECU Coding】The KINGBOLEN EDIAG Plus diagnostic tool is used as an OE Level scanner. ECU Coding allows you to match replaced components with ECU data, hidden flash functions for BMW, for GM, for Benz, etc. Whether you are a private owner or a professional technician, EDIAG Plus is a powerful and handy scanner tool for you. Coverage list may vary by car brand and model. Please check with us before placing an order.
- 【Bidirectional Test】This EDIAG plus Bluetooth scan tool could send commands to and receive information from ECU of the vehicles to test the solenoids and actuators working status, which finds faults without using the vehicle controls and no need disassembling components, saving a lot of time to identify the root cause. You can use Bidirectional Test to check Window Up and Down/Wiper/Door Test, Rearview Mirror Test, Headlight Test and more.
- Single Fan Replacement
- Black Plastic Fan Blade
- Black Plastic Shroud
- “Fan 1 Blade Quantity – 9 Blades, Fan Quantity – 1”
- Dual Fan Replacement
- White Plastic Fan Blade
- Black Plastic Shroud
- Fan 1 Blade Quantity – 7 Blades, Fan 2 Blade Quantity -7 Blades, Fan Quantity – 2
- Includes Module
Understanding the Radiator Fan
Purpose of the Radiator Fan
The radiator fan plays a vital role in maintaining the optimal temperature of your vehicle’s engine. Its primary purpose is to cool down the engine by dissipating heat generated during the combustion process. By blowing air over the radiator, the fan helps facilitate the transfer of heat from the coolant to the surrounding air.
Different Types of Radiator Fans
There are two main types of radiator fans: mechanical fans and electric fans. Mechanical fans are typically driven by the engine’s crankshaft via a belt and pulley system. On the other hand, electric fans are powered by an electric motor and are controlled by the engine control unit (ECU).
How the Radiator Fan Operates
The radiator fan operates based on the signals it receives from various sensors and control modules. These components continuously monitor the engine’s temperature and activate the fan when necessary to prevent overheating. The fan can be triggered by the engine control unit (ECU) or directly by the coolant temperature sensor.
Normal Operation of the Radiator Fan
Cooling System Operation
To understand why the radiator fan only turns on when the AC is on, it’s essential to grasp the normal operation of the cooling system. When the engine is running, the coolant circulates through the engine block, absorbing heat. It then flows into the radiator, where the radiator fan comes into play to dissipate the heat.
When the Radiator Fan Turns On
The radiator fan typically turns on when the engine temperature exceeds a certain threshold, which is usually around 200 to 230 degrees Fahrenheit (93 to 110 degrees Celsius). As the coolant temperature rises, the fan kicks in to increase the airflow over the radiator, helping to regulate the temperature and prevent overheating.
Factors Affecting Radiator Fan Operation
Several factors can influence when the radiator fan turns on, including:
- Engine Temperature
- Ambient Temperature
- Speed and Load of the Engine
- Cooling System Design
These factors vary depending on the vehicle make and model, as well as the prevailing driving conditions. However, there are instances where the radiator fan only turns on when the AC is on, deviating from the normal operation.
Significance of the Radiator Fan Only Turning On When AC Is On
Relationship between the Radiator Fan and the AC System
The radiator fan and the air conditioning (AC) system are interconnected in many vehicles. When the AC is turned on, the compressor starts working, pressurizing the refrigerant and circulating it through the AC system. This process generates additional heat, which needs to be dissipated to maintain the AC system’s efficiency.
Purpose of the Radiator Fan When the AC Is On
If the radiator fan only turns on when the AC is on, it serves a dual purpose. In addition to its primary role of cooling the engine, the fan also helps dissipate the extra heat generated by the AC system. Without the fan running, the AC system could become overwhelmed by excessive heat, resulting in reduced cooling capacity.
Possible Causes of the Radiator Fan Only Turning On When AC Is On
Faulty Radiator Fan Control Module
A faulty radiator fan control module can disrupt the normal operation of the fan, causing it to only turn on when the AC is on. The control module is responsible for receiving and interpreting signals from the various sensors and activating the fan accordingly. If the module malfunctions, it may not trigger the fan at the appropriate times.
Malfunctioning Thermostat
A malfunctioning thermostat can also contribute to the radiator fan only turning on when the AC is on. The thermostat regulates the flow of coolant through the engine and the radiator. If it fails to open at the correct temperature, the coolant may not reach the radiator, preventing the fan from activating.
Defective Radiator Fan Relay
A defective radiator fan relay can disrupt the communication between the control module and the fan. The relay acts as a switch, allowing the control module to send power to the fan. If the relay fails, the control module may not be able to activate the fan, resulting in its operation only when the AC is on.
Wiring Issues
Faulty wiring can lead to intermittent or incorrect signaling between the control module, sensors, and the fan. If the wiring is damaged, loose, or corroded, it can disrupt the flow of signals, causing the fan to behave abnormally. This can result in the fan only turning on when the AC is running.
Faulty Coolant Temperature Sensor
The coolant temperature sensor provides crucial input to the control module, allowing it to determine when the fan needs to be activated. A faulty sensor can provide inaccurate readings or fail to send signals altogether, leading to irregular fan operation. This can manifest as the fan only turning on when the AC is on.
Diagnostic Steps to Identify the Cause
Checking the Radiator Fan Control Module
To determine if the radiator fan control module is faulty, you can use a diagnostic tool to retrieve any stored error codes. Additionally, you can test the control module’s functionality by bypassing it and applying power directly to the fan. If the fan operates normally, the control module may require replacement.
Testing the Thermostat
To test the thermostat, you can start by inspecting it visually for any obvious signs of damage or corrosion. Next, you can use a multimeter to measure its resistance and verify that it opens and closes at the specified temperatures. If the thermostat fails these tests, it may need to be replaced.
Inspecting the Radiator Fan Relay
Inspect the radiator fan relay for any signs of damage or overheating. You can also use a multimeter to test the continuity of the relay’s contacts. If the relay is found to be defective, it should be replaced with a new one to restore proper fan operation.
Examining the Wiring
A thorough visual inspection of the wiring harness is necessary to identify any visible damage or loose connections. You can also use a multimeter to check for continuity and measure voltage at various points in the circuit. Repair or replace any damaged or faulty wiring to ensure proper fan operation.
Testing the Coolant Temperature Sensor
To test the coolant temperature sensor, you can use a multimeter to measure its resistance at different engine temperatures. Compare the readings to the specifications provided by the manufacturer. If the sensor’s readings deviate significantly from the expected values, it may need to be replaced.
Troubleshooting and Repair
Replacing the Radiator Fan Control Module
If the radiator fan control module is determined to be faulty, it should be replaced with a new one. Follow the manufacturer’s instructions and ensure that the new module is compatible with your vehicle’s make and model. After installation, test the fan to verify proper operation.
Repairing or Replacing the Thermostat
If the thermostat is found to be malfunctioning, attempt to repair it if possible. However, if it cannot be repaired or if the damage is severe, replacement may be necessary. Consult the manufacturer’s guidelines to ensure proper installation and calibration of the new thermostat.
Servicing or Replacing the Radiator Fan Relay
If the radiator fan relay is defective, it should be serviced or replaced. Depending on the specific relay design, you may be able to clean or repair it. However, in most cases, it is recommended to replace the relay to ensure reliable fan operation.
Fixing the Wiring Issues
If wiring issues are identified, repair or replace any damaged or faulty wiring. Ensure proper insulation and secure connections to prevent future problems. After addressing the wiring issues, thoroughly test the fan to confirm that it operates correctly.
Repairing or Replacing the Coolant Temperature Sensor
If the coolant temperature sensor is determined to be faulty, it should be repaired or replaced. Follow the manufacturer’s instructions and use the appropriate tools to ensure proper installation. After replacing the sensor, verify its functionality by testing the fan’s operation.
Prevention and Maintenance Tips
Regular Cooling System Inspection
To prevent issues with the radiator fan, it is essential to regularly inspect the cooling system. Check for any leaks, signs of damage, or worn-out components. Address any issues promptly to ensure the cooling system operates optimally.
Keeping the Cooling System Clean
Regularly clean the radiator and remove any debris or obstructions that may hinder the airflow. A clean radiator allows for better heat transfer and reduces the strain on the radiator fan.
Flushing and Replacing the Coolant
Flushing and replacing the coolant at the recommended intervals helps maintain the cooling system’s efficiency. Over time, coolant can become contaminated and lose its effectiveness. Fresh coolant provides better heat transfer, reducing the workload on the radiator fan.
Proper Use of the AC System
Avoid running the AC system excessively or at its lowest temperature setting for extended periods. Overworking the AC system can generate excessive heat, increasing the strain on the radiator fan.
Regular Maintenance of Radiator Fan Components
Regularly inspect and maintain the various components of the radiator fan system, including the fan blades, motor, and fan shroud. Ensure the fan operates smoothly and that all connections are secure. Perform any necessary repairs or replacements to keep the fan in optimal working condition.
The radiator fan only turning on when the AC is on can be a puzzling situation for car owners. However, by understanding the underlying causes and following the troubleshooting steps outlined in this guide, you can identify and resolve any issues affecting the fan’s operation. Regular maintenance and preventive measures will help ensure that your radiator fan operates smoothly, keeping your engine cool and preventing any overheating problems.
Overheating Help! | Testing Cooling Fans – Relays – Connections
Frequently Asked Questions (FAQ)
Why does the radiator fan only turn on when the AC is on?
Is it normal for the radiator fan to only run when the AC is turned on?
What happens if the radiator fan does not turn on when the AC is on?
Can I drive my car if the radiator fan only turns on when the AC is on?
How can I fix the issue of the radiator fan only running when the AC is on?
Conclusion
In conclusion, the radiator fan plays a crucial role in maintaining the optimal temperature of a vehicle’s engine. It helps dissipate heat generated during the combustion process by blowing air over the radiator.
There are two main types of radiator fans: mechanical fans and electric fans. The fan operates based on signals from sensors and control modules, turning on when the engine temperature exceeds a certain threshold.
Under normal operation, the radiator fan turns on when the engine temperature reaches a certain point, around 200 to 230 degrees Fahrenheit. However, in some cases, the radiator fan only turns on when the AC is on. This is because the radiator fan and the AC system are interconnected in many vehicles.
When the AC is turned on, the compressor generates additional heat that needs to be dissipated. The radiator fan helps dissipate this extra heat to maintain the efficiency of the AC system. Several factors can contribute to the radiator fan only turning on when the AC is on, including a faulty radiator fan control module, malfunctioning thermostat, defective radiator fan relay, wiring issues, or a faulty coolant temperature sensor.