Kenmore Refrigerator 795 Ice Maker Problem


Kenmore Refrigerator 795 Ice Maker Problem

Introduction

Is your Kenmore Refrigerator 795 ice maker not producing ice? It’s a common problem, and it can be frustrating, especially during hot weather or when you’re planning a party. A malfunctioning ice maker can mean no ice for your drinks, leading to inconvenience and potentially spoiled food if the temperature inside the fridge isn’t maintained. Addressing this issue promptly can prevent further problems and save you from buying bags of ice from the store.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Refrigerator 795 Ice Maker Problem.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Kenmore Refrigerator 795 Ice Maker Problem

Here are some frequent reasons why your Kenmore 795 ice maker might be acting up:

  • Frozen Water Line: The water line that supplies water to the ice maker can freeze, blocking the flow.
  • Water Inlet Valve Malfunction: This valve controls the water flow to the ice maker. If it’s faulty, it won’t open or close properly.
  • Ice Maker Mold is Frozen Over: Ice buildup in the ice maker mold can prevent new ice from forming.
  • Low Water Pressure: Insufficient water pressure can hinder ice production.
  • Faulty Ice Maker Module: The module controls the ice-making cycle. A faulty module can disrupt the process.
  • Dirty Water Filter: A clogged water filter restricts water flow, impacting ice production.
  • Ice Jam: Ice can get stuck in the ejector arm or chute, preventing the ice maker from working correctly.
  • Incorrect Freezer Temperature: If the freezer is too warm, ice won’t freeze properly. If it’s too cold, the water line can freeze.
  • Ice Level Control Arm Stuck: This arm senses the ice level. If stuck in the “up” position, it signals the ice maker to stop producing ice.
  • Power Outage/Surge: Brief power interruptions can sometimes confuse the ice maker’s control system.

Symptoms Checklist

Here are signs your ice maker is having issues:

  • No ice production at all.
  • Ice cubes are small or misshapen.
  • Ice maker is making a humming or buzzing noise but not producing ice.
  • Ice maker is overflowing, causing a build-up of ice.
  • Ice has a strange taste or odor.
  • Water is leaking from the ice maker area.
  • Ice maker is producing ice very slowly.
  • Ice maker isn’t dispensing ice when requested.

How to Fix Kenmore Refrigerator 795 Ice Maker Problem Step-by-Step Guide

Follow these steps to troubleshoot your ice maker:

  1. Turn off the Ice Maker: Locate the power switch on the ice maker (usually a wire arm or an on/off switch) and turn it off. This prevents further water flow during troubleshooting.
  2. Check the Freezer Temperature: Ensure the freezer temperature is set between 0F and 5F (-18C to -15C). Use a thermometer to confirm.
  3. Inspect the Water Line: Locate the water line behind the refrigerator. Look for kinks or bends that might restrict water flow. Straighten any kinks.
  4. Check the Water Pressure: Make sure your home’s water pressure is sufficient (typically 30-100 PSI). Low water pressure can affect ice production.
  5. Replace the Water Filter: A clogged water filter is a common culprit. Replace it according to the manufacturer’s instructions (usually every 6 months).
  6. Thaw a Frozen Water Line: If you suspect a frozen water line, unplug the refrigerator. Use a hairdryer (on a low setting) to gently warm the water line. Do not use a heat gun!
  7. Check the Ice Maker Mold: Look for ice buildup in the ice maker mold. If there’s excessive ice, use a plastic utensil to carefully remove it. Do not use sharp metal objects.
  8. Clean the Ice Maker: Periodically clean the ice maker with a solution of warm water and baking soda. Wipe down all surfaces, including the ice storage bin.
  9. Inspect the Ice Level Control Arm: Make sure the ice level control arm moves freely. If it’s stuck, gently try to dislodge it.
  10. Reset the Ice Maker: Some Kenmore refrigerators have a reset button on the ice maker. Consult your owner’s manual to find the reset button and follow the instructions. If no button is available, try unplugging the refrigerator for 5 minutes, then plugging it back in.
  11. Listen for the Water Valve: After resetting, listen for the water valve to open and fill the ice maker. You should hear a slight humming or buzzing sound. If you don’t hear anything, the water inlet valve may be faulty.
  12. Check the Ejector Arm: Make sure the ejector arm (the mechanism that pushes the ice out) is not blocked by ice or debris.
  13. Wait 24 Hours: After performing these steps, give the ice maker 24 hours to resume normal ice production.

Fix the Issue Without Buying Parts

Before considering replacement parts, try these free methods:

  • Refrigerator Reset: Unplug your refrigerator for 5 minutes. This can reset the ice maker’s electronics.
  • Thorough Cleaning: Clean the ice maker components and ice storage bin to remove any buildup or debris.
  • Check Water Lines: Inspect and straighten any kinks in the water lines to ensure proper water flow.
  • Temperature Recalibration: Verify and adjust the freezer temperature to the optimal range.

When Replacement Might Be Necessary

If the above steps don’t resolve the problem, you might need to replace a part. Common parts that fail include:. For more related activities, check out our Ge Fridge Not Getting Cold.

  • Water Inlet Valve: $30-$70
  • Ice Maker Module: $50-$150
  • Water Filter Housing: $20-$50

Consider these replacements only after exhausting all other troubleshooting steps, and only if you are comfortable with appliance repair.

Safety Warning

  • Always unplug the refrigerator before performing any maintenance or repairs.
  • Avoid working on electrical components with wet hands or on wet floors.
  • Be careful when handling sharp objects or tools.
  • Consult a qualified technician if you are unsure about any repair procedures.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Adjustable wrench
  • Multimeter (optional, for testing electrical components)
  • Plastic putty knife or scraper
  • Thermometer

FAQ

Here are some common questions about ice maker issues:

  • Q: Why is my ice maker making ice slowly?
    A: Check the water filter, water pressure, and freezer temperature.
  • Q: Why is my ice maker making small or misshapen ice cubes?
    A: This could be due to low water pressure or a partially frozen water line.
  • Q: How often should I replace my water filter?
    A: Every 6 months, or as recommended by the manufacturer.
  • Q: How do I defrost my ice maker?
    A: Turn off the ice maker and unplug the refrigerator. Allow the ice to melt naturally, or use a hairdryer (on low setting) to speed up the process.
  • Q: I hear a buzzing sound from my ice maker, but no ice is being made. What does this mean?
    A: This could indicate a problem with the water inlet valve or the ice maker module.

Conclusion

Troubleshooting a Kenmore 795 ice maker problem can seem daunting, but by following these steps, you can often resolve the issue yourself. Remember to start with the simplest solutions first, and don’t be afraid to consult your owner’s manual for specific instructions. If you’ve tried everything and are still having problems, it might be time to call a qualified appliance repair technician. But with a little patience and effort, you can often get your ice maker back up and running without incurring expensive repair bills.

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 1

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 1 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top