Introduction
Is your Dometic RM1350 refrigerator not keeping your food and drinks cold? This is a common problem for RV owners and can be incredibly frustrating, especially when you’re on the road or preparing for a trip. A refrigerator that isn’t cooling properly can lead to spoiled food, wasted money, and a lot of inconvenience. It’s important to address this issue quickly to prevent food spoilage and potential health hazards. Let’s walk through some troubleshooting steps to get your RM1350 cooling again.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Dometic Rm1350 Not Cooling.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Dometic RM1350 Not Cooling
Here are several reasons why your Dometic RM1350 might not be cooling:
- Incorrect Leveling: RV refrigerators rely on gravity for proper cooling. If your RV isn’t level, the refrigerant can’t flow correctly.
- Blocked Venting: The vents behind the refrigerator need to be clear to allow heat to escape. Obstructions prevent proper cooling.
- Dirty Burner Assembly (Gas Operation): If you’re using propane, a dirty burner can affect the flame and reduce cooling efficiency.
- Faulty Thermistor: The thermistor senses the temperature inside the refrigerator. A bad thermistor can provide incorrect readings, preventing the cooling system from activating.
- Damaged Heating Element (Electric Operation): If you’re using electric power, a malfunctioning heating element won’t heat the refrigerant, leading to no cooling.
- Control Board Issues: The control board manages the entire cooling process. A faulty board can cause various problems, including a lack of cooling.
- Ammonia Leak: Although less common, an ammonia leak will prevent the fridge from cooling. This is often accompanied by a strong odor.
- Power Supply Problems: Insufficient voltage, loose connections, or blown fuses can hinder the fridge’s operation.
Symptoms Checklist
Use this checklist to help pinpoint the problem:
- Refrigerator is warm to the touch inside.
- Food is spoiling faster than usual.
- The refrigerator doesn’t seem to be running at all (no noise).
- The refrigerator is running, but not cooling effectively.
- Error codes are displayed on the control panel.
- Unusual smells, like ammonia, are present.
- The back of the refrigerator feels excessively hot.
How to Fix Dometic RM1350 Not Cooling Step-by-Step Guide
Follow these steps to troubleshoot your Dometic RM1350:
- Check Leveling: Use a bubble level to ensure your RV is level. Adjust the leveling jacks as needed.
- Inspect Venting: Remove the exterior access panel on the back of the refrigerator. Check for obstructions like nests, debris, or insulation. Clear any blockages.
- Verify Power Source: Ensure the refrigerator is properly connected to the power source (propane or electric). Check breakers and fuses. Make sure your RV is receiving adequate power (voltage).
- Clean Burner Assembly (Propane): Turn off the propane supply. Carefully remove and clean the burner assembly with a wire brush to remove any soot or debris. Reassemble.
- Check Thermistor: Locate the thermistor inside the refrigerator. Ensure it’s properly connected. If possible, test its resistance with a multimeter (if you are comfortable with electronics).
- Reset the Refrigerator: Turn off the refrigerator and disconnect it from the power source (both propane and electric) for at least 30 minutes. This can sometimes reset the control board.
- Inspect Wiring: Check for loose or corroded wiring connections, especially at the back of the refrigerator. Clean and tighten connections as needed.
- Listen for the Burner (Propane): When operating on propane, listen for the clicking of the igniter and the sound of the burner igniting. If you don’t hear these sounds, there may be an issue with the ignition system.
- Feel the Heating Element (Electric): When operating on electric, carefully touch the heating element (after disconnecting power!) to see if it feels warm. Be extremely careful to avoid burns. If it’s cold, the element might be faulty.
- Check the Voltage: Use a multimeter to check the voltage at the fridge. Low voltage will cause it not to operate properly.
- Check the Cooling Fins: Inside the refrigerator, make sure the cooling fins are not iced up. Excessive ice buildup can prevent proper cooling. Defrost the refrigerator if necessary.
Fix the Issue Without Buying Parts
Here are some free methods to try before considering replacements:
- Reset: As mentioned earlier, a simple reset can sometimes resolve electronic glitches.
- Cleaning: Regularly cleaning the vents and burner assembly can prevent future problems.
- Inspection: Regularly inspect the wiring, connections, and venting to catch potential issues early.
- Leveling: Always ensure your RV is level when using the refrigerator.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and your Dometic RM1350 still isn’t cooling, a replacement of certain parts might be necessary. Common parts that fail include the thermistor (estimated cost: $20-$50 USD), heating element (estimated cost: $50-$100 USD), or the control board (estimated cost: $150-$300 USD). In rare cases, the entire cooling unit might need replacement, which can be a significant expense (around $500-$1000 USD). Consult a qualified RV technician for diagnosis and repair.
Safety Warning
- Always disconnect the power supply (both electric and propane) before working on the refrigerator.
- Work in a well-ventilated area, especially when dealing with propane.
- Avoid touching electrical components with wet hands.
- If you’re uncomfortable working with electricity or propane, consult a qualified technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Multimeter (for electrical testing)
- Wire brush
- Bubble level
- Socket set
- Wrench set
FAQ
Here are some frequently asked questions:
-
Q: Why is my refrigerator cooling on propane but not on electric?
A: The heating element might be faulty. Check the element for continuity with a multimeter. -
Q: Why is my refrigerator cooling intermittently?
A: This could be due to a faulty thermistor or a loose wiring connection. Check both. -
Q: How can I tell if my refrigerator has an ammonia leak?
A: You’ll likely smell a strong ammonia odor, and the refrigerator won’t cool at all. -
Q: How often should I clean the vents behind my refrigerator?
A: It’s a good idea to clean the vents at least twice a year, or more frequently if you camp in dusty environments.
Conclusion
Troubleshooting a Dometic RM1350 refrigerator that isn’t cooling can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Remember to prioritize safety and take your time. If you’re not comfortable with any of these steps, or if the problem persists, don’t hesitate to contact a qualified RV technician. Good luck, and happy camping!
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Refrigerator Problems 2 section for step-by-step troubleshooting solutions.
