Whirlpool Washing Machine Will Not Drain


Whirlpool Washing Machine Will Not Drain

Introduction

A washing machine that won’t drain is a common and frustrating problem. When your Whirlpool washer refuses to empty the water after a wash cycle, it leaves your clothes soaking wet and makes the machine unusable. This can happen after a normal load, after washing bulky items, or even seemingly out of nowhere. Addressing this issue quickly is crucial to prevent potential water damage to your home and to get your laundry routine back on track.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Whirlpool Washing Machine Will Not Drain.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Whirlpool Washing Machine Will Not Drain

Here are some of the most common reasons why your Whirlpool washing machine isn’t draining:

  • Clogged Drain Hose: The hose that carries water away from the machine can get blocked with lint, small objects, or soap residue.
  • Blocked Drain Pump Filter: Most Whirlpool washers have a filter that catches debris before it reaches the drain pump. If this filter is clogged, the pump can’t function properly.
  • Faulty Drain Pump: The drain pump is responsible for pushing the water out of the machine. If it’s broken or worn out, it may not be able to do its job.
  • Clogged Drain Pipe: The pipe that the washing machine drain hose connects to in your wall can be clogged, preventing proper drainage.
  • Kinked or Bent Drain Hose: A kink in the drain hose can restrict water flow and prevent the washer from draining.
  • Air Lock in Drain Hose: Sometimes, air can get trapped in the drain hose, creating an air lock that prevents water from flowing.
  • Control Board Malfunction: In rare cases, a problem with the washing machine’s control board can prevent the drain cycle from activating.
  • Lid Switch Issue: If your washer thinks the lid is open (even when it’s not), it might not start the drain cycle.

Symptoms Checklist

Here are some indicators that can help you pinpoint the problem:

  • Washing machine is full of water after the wash cycle.
  • You hear a humming noise, but the water isn’t draining.
  • The washing machine displays an error code related to draining.
  • Water drains very slowly, or only partially.
  • The drain hose is visibly kinked or blocked.
  • The drain pump filter is full of debris.

How to Fix Whirlpool Washing Machine Will Not Drain Step-by-Step Guide

Follow these steps to troubleshoot and fix your washing machine:

  1. Unplug the Washing Machine: For safety, always unplug the washing machine from the power outlet before starting any repairs.
  2. Locate the Drain Hose: The drain hose is usually located at the back of the machine.
  3. Inspect the Drain Hose for Kinks: Make sure the hose isn’t kinked, bent, or crushed. Straighten it out if necessary.
  4. Detach the Drain Hose from the Drain Pipe: Carefully remove the drain hose from the drain pipe in the wall or standpipe. Have a bucket ready to catch any water that might spill out.
  5. Check the Drain Pipe for Clogs: Insert a drain snake or a stiff wire into the drain pipe to check for any blockages. Clear any debris you find.
  6. Inspect the Drain Hose for Blockages: Examine the drain hose for any visible obstructions. You can try flushing it with water to dislodge any debris.
  7. Locate the Drain Pump Filter: The drain pump filter is usually located at the front bottom of the washing machine, behind a small access panel. Consult your owner’s manual for the exact location.
  8. Drain Remaining Water (Carefully): Place a shallow pan or towel under the access panel. Some water will likely come out when you open the filter.
  9. Remove and Clean the Drain Pump Filter: Carefully unscrew and remove the drain pump filter. Clean it thoroughly under running water to remove any lint, hair, or debris.
  10. Inspect the Drain Pump Impeller: While the filter is removed, shine a flashlight into the drain pump housing and check the impeller (the small fan-like blades). Make sure it’s not blocked by anything.
  11. Reassemble the Drain Pump Filter: Reinstall the cleaned drain pump filter, making sure it’s securely tightened.
  12. Reattach the Drain Hose: Reconnect the drain hose to the drain pipe. Make sure it’s securely attached.
  13. Plug in the Washing Machine: Plug the washing machine back into the power outlet.
  14. Run a Test Cycle: Run a short wash cycle (without clothes) to see if the machine drains properly.
  15. Check for Error Codes: If the problem persists, check your owner’s manual for error codes and their corresponding solutions.

Fix the Issue Without Buying Parts

Sometimes, you can resolve the draining issue without replacing any parts:

  • Reset the Washing Machine: Unplug the washer for 1-2 minutes and plug it back in. This can sometimes clear minor electrical glitches.
  • Clean the Washing Machine: Run a cleaning cycle with a washing machine cleaner to remove soap buildup and residue that can contribute to clogs.
  • Recalibrate the Washing Machine (if applicable): Some Whirlpool models have a recalibration mode. Consult your owner’s manual for instructions on how to run it.
  • Inspect the Lid Switch: Make sure the lid switch is functioning correctly. Clean it of any debris or residue.
  • Regular Maintenance: Prevent future clogs by regularly cleaning the drain pump filter and using the correct amount of detergent.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washing machine still won’t drain, the drain pump itself might be faulty. Replacing the drain pump can cost between $50 and $200, depending on the model and where you purchase the part. Other parts that might need replacement include the drain hose (if damaged) or, in rare cases, the control board.

Safety Warning

  • Always unplug the washing machine before performing any repairs.
  • Be careful when handling water to avoid electrical shock.
  • Wear gloves to protect your hands from dirt and debris.
  • Clean up any spills immediately to prevent slips and falls.

Tools You May Need

  • Bucket
  • Pliers
  • Screwdriver
  • Drain snake or stiff wire
  • Flashlight
  • Gloves
  • Towels

FAQ

Here are some frequently asked questions about washing machine draining problems:

  • Q: Why is my washing machine making a humming noise but not draining? A: This usually indicates that the drain pump is blocked or faulty. Check the drain pump filter for clogs.
  • Q: How often should I clean the drain pump filter? A: It’s recommended to clean the drain pump filter every 3-6 months, depending on how frequently you use your washing machine.
  • Q: Can I use a chemical drain cleaner in my washing machine? A: No, it’s not recommended to use chemical drain cleaners in your washing machine, as they can damage the machine’s components.
  • Q: What does the “LF” error code mean on my Whirlpool washer? A: “LF” typically means “Long Fill” which can sometimes be related to draining issues, as the machine might be struggling to detect water levels correctly. Try cleaning the water inlet valve filters and checking the drain hose.

Conclusion

Troubleshooting a Whirlpool washing machine that won’t drain can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Remember to prioritize safety and take your time. If you’re not comfortable performing these repairs, don’t hesitate to call a qualified appliance repair technician for assistance. But with a little effort, you can often get your washer back in working order without spending a fortune.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top