Introduction
Discovering standing water in your washing machine after a cycle is frustrating. Not only does it prevent you from transferring your clothes to the dryer, but it can also indicate a bigger problem with your appliance. A washer that doesn’t drain completely can lead to mildew, unpleasant odors, and even damage to your clothing. Addressing this issue quickly is crucial to prevent further complications and ensure your washing machine functions correctly. Explore more in our Washing Machine Problems 5 collection.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Washer Does Not Drain Completely.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Washer Not Draining Completely
Here are several common culprits behind a washer that refuses to drain:
- Clogged Drain Hose: The hose that carries water away from the washer can become blocked with lint, small objects, or debris.
- Blocked Drain Pump Filter: Many washers have a filter designed to catch larger items before they reach the drain pump, preventing damage. This filter can become clogged.
- Drain Pump Malfunction: The drain pump is responsible for actively pumping the water out of the washer. If it’s faulty, it may not be able to do its job effectively.
- Clogged Drainpipe: The house drainpipe where the washer drains into can be obstructed, preventing the water from flowing out.
- Kinked or Damaged Drain Hose: A kink or damage to the drain hose can restrict water flow.
- Air Lock in Drain Hose: Trapped air in the drain hose can create a barrier that prevents proper draining.
- Lid Switch Problem: In some washers, a faulty lid switch can prevent the drain cycle from initiating.
- Control Board Issues: Although less common, a malfunctioning control board can sometimes cause draining problems.
Symptoms Checklist
Confirming the symptoms will help you pinpoint the cause:
- Water remains in the washer drum after the cycle ends.
- The washer makes unusual noises during the drain cycle (humming, grinding, or nothing at all).
- The drain cycle takes an excessively long time.
- Error codes related to draining appear on the washer’s display panel.
- Water drains very slowly.
How to Fix Washer Not Draining Completely Step-by-Step Guide
Follow these steps to troubleshoot and fix the draining issue:
- Unplug the Washer: Safety first! Disconnect the washer from the power outlet to avoid electrical shock.
- Inspect the Drain Hose: Check the drain hose for kinks, bends, or damage. Straighten any kinks and ensure the hose is not crushed.
- Detach the Drain Hose: Carefully detach the drain hose from the drainpipe or standpipe.
- Check for Clogs in the Drain Hose: Hold the drain hose up and flush it with water from a garden hose or faucet to dislodge any blockages.
- Inspect the Drainpipe: If possible, check the drainpipe where the hose connects for any obstructions. A plumber’s snake can help clear minor blockages.
- Locate the Drain Pump Filter: Consult your washer’s user manual to find the location of the drain pump filter. It’s usually located at the front, bottom of the machine behind a small access panel.
- Clean the Drain Pump Filter: Carefully remove the drain pump filter (be prepared for some water to spill). Clean out any lint, debris, or small objects.
- Inspect the Drain Pump: With the filter removed, check the drain pump impeller (the small fan-like part inside) for obstructions. You might be able to reach in and remove any visible debris.
- Reconnect the Drain Hose: Reattach the drain hose securely to the drainpipe.
- Level the Washing Machine: Ensure the washing machine is level. An unlevel washer can sometimes have draining issues. Adjust the leveling feet at the bottom of the machine as needed.
- Run a Test Cycle: Plug the washer back in and run a short spin cycle to see if the draining issue has been resolved.
- Check the Lid Switch (If Applicable): If your washer has a lid switch, make sure it’s functioning correctly. Sometimes, a faulty switch can prevent the drain cycle from starting.
Fix the Issue Without Buying Parts
Before considering replacement parts, try these free methods:
- Reset the Washer: Unplug the washer for 1-2 minutes, then plug it back in. This can sometimes reset the control board and resolve minor glitches.
- Run a Cleaning Cycle: Many washers have a self-cleaning cycle that helps remove buildup and debris. Consult your user manual.
- Regular Maintenance: Regularly clean the drain pump filter (every 1-3 months) to prevent clogs.
- Inspect Hoses Regularly: Check the drain and water inlet hoses for kinks, damage, or leaks.
When Replacement Might Be Necessary
If the above steps don’t resolve the issue, the drain pump itself might be faulty. Replacing the drain pump can cost between $50 and $200 (USD), including the part and labor if you hire a technician. Other parts that might require replacement (though less common) are the lid switch ($20-$50) or the control board ($100-$300). For more related activities, check out our Samsung Washer Not Taking Water.
Safety Warning
- Always unplug the washing machine before performing any repairs or maintenance.
- Be prepared for water spillage when removing the drain pump filter or hoses. Have towels ready.
- Avoid touching any electrical components inside the washer.
- Be careful when working with tools to avoid injury.
- If you’re uncomfortable performing any of these steps, consult a qualified appliance repair technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Bucket or container to catch water
- Towels
- Plumber’s snake (optional)
- Gloves
FAQ
Here are some frequently asked questions:
- Q: Why is my washer draining slowly? A: Slow draining is often caused by a partial clog in the drain hose or drain pump filter.
- Q: How often should I clean the drain pump filter? A: It’s recommended to clean the drain pump filter every 1-3 months, depending on how frequently you use your washer.
- Q: Can I use a chemical drain cleaner in my washing machine? A: It’s generally not recommended to use chemical drain cleaners in your washing machine, as they can damage the components.
- Q: What if I can’t find the drain pump filter? A: Consult your washer’s user manual for the exact location of the drain pump filter.
- Q: The impeller on the drain pump is stuck. What should I do? A: Try gently rotating the impeller with your finger to see if you can dislodge any debris. If it’s still stuck, the pump may need to be replaced.
Conclusion
Troubleshooting a washing machine that isn’t draining completely can seem daunting, but by following these steps, you can often resolve the issue yourself. Start with the simplest solutions, like checking the drain hose and filter, and work your way up to more complex problems. If you’ve exhausted all DIY options and your washer still isn’t draining, it might be time to call a qualified appliance repair technician. Good luck!. Discover more free resources across our collection library.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
