Lg Washing Machine Water Won T Stop Running

Introduction

Discovering that your LG washing machine continuously fills with water, even when its not in use, can be incredibly frustrating. This problem, where the lg washing machine water won’t stop running, not only wastes water and increases your utility bills, but can also lead to potential water damage in your home. It’s often noticed after a wash cycle, or even days later when you unexpectedly find water pooling in or around the machine. Addressing this issue quickly is important to prevent further damage and unnecessary expense. This guide offers simple steps to diagnose and resolve the problem yourself.

Common Causes of lg washing machine water won’t stop running

Several factors can cause your LG washing machine to continuously fill with water. Here are some of the most common:. For more related activities, check out our Kenmore Washer Not Draining Properly.

• Faulty Inlet Valve: The inlet valve controls the flow of water into the washing machine. If it’s stuck open or malfunctioning, it won’t shut off properly.
• Water Pressure Issues: High or fluctuating water pressure can overwhelm the inlet valve.
• Defective Water Level Sensor: This sensor tells the machine when the water has reached the correct level. If it’s faulty, the machine may think it needs more water.
• Clogged Drain Hose: If the drain hose is blocked, water can back up into the drum and prevent the machine from recognizing the correct water level.
• Siphon Effect: An improperly installed or positioned drain hose can create a siphon effect, pulling water into the machine.
• Control Board Malfunction: In rare cases, a problem with the washing machine’s control board can cause the inlet valve to remain open.
• Damaged Inlet Valve Solenoid: The solenoid is the electrical part of the inlet valve that opens and closes the water flow. If damaged, it might not close properly.
• Loose Hose Connections: Loose connections on the water inlet hoses can cause drips and create the illusion of constant filling.

Symptoms Checklist

Use this checklist to confirm that you are experiencing the core issue:

• Water continuously enters the washing machine drum, even when the machine is off.
• The water level in the drum gradually rises without the machine running a cycle.
• You can hear water flowing into the machine, even when it’s not supposed to be.
• The washing machine overflows.
• Error codes related to water levels or inlet valves might be displayed on the machine’s control panel.
• The water keeps filling, even after unplugging the machine.

How to Fix lg washing machine water won’t stop running Step-by-Step Guide

Follow these steps to troubleshoot and fix the issue. Before starting, make sure to unplug the washing machine from the power outlet.

1. Turn off the Water Supply: Locate the water shut-off valves (usually behind the washing machine) and turn them off completely. This will stop the water flow and prevent further flooding.
2. Inspect the Inlet Hoses: Check the hoses that connect to the water supply for any kinks, cracks, or leaks. Ensure they are securely attached to both the water supply and the washing machine.
3. Check Water Pressure: Excessively high water pressure can damage the inlet valve. A pressure regulator can be installed on the water supply line if needed.
4. Clean the Inlet Valve Screens: Disconnect the inlet hoses from the back of the washing machine. You’ll find small screens inside the inlet valve openings. Clean these screens with a small brush to remove any sediment or debris.
5. Inspect the Drain Hose: Ensure the drain hose is properly positioned in the drainpipe. It should not be inserted too far, as this can create a siphon effect. A curved drain hose support can help prevent siphoning.
6. Check for Drain Clogs: Disconnect the drain hose from the drainpipe and check for any clogs. You can use a stiff wire or a plumbing snake to clear any obstructions.
7. Reset the Washing Machine: Unplug the washing machine from the power outlet for about 5-10 minutes. Then, plug it back in. This can sometimes reset the control board and resolve minor glitches.
8. Test the Water Level Sensor (If accessible): Some LG models allow access to the water level sensor. Visually inspect it for any damage or loose connections. A multimeter can be used to test its functionality, but this is best left to a qualified technician if you’re not comfortable with electrical testing.
9. Check the Inlet Valve: Visually inspect the inlet valve (located behind the washing machine). Look for any signs of damage or corrosion. If possible, test the solenoid using a multimeter, but exercise caution as this involves electrical components.
10. Run a Test Cycle: After completing the above steps, turn the water supply back on and run a short test cycle to see if the problem has been resolved. Observe carefully whether the water still fills continuously.
11. Check the Washing Machine Level: Ensure the washing machine is level. Uneven leveling can sometimes affect water level sensing and draining. Use a level to check and adjust the machine’s feet if needed.
12. Look for Error Codes: If an error code appears on the display panel, consult your LG washing machine’s user manual to understand the meaning of the code and the recommended troubleshooting steps.

Fix the Issue Without Buying Parts

Before considering part replacement, try these free methods:

• Reset the Machine: As mentioned earlier, unplugging the machine for 5-10 minutes can often resolve minor software glitches.
• Clean Inlet Valve Screens: Regularly cleaning these screens prevents debris from interfering with the valve’s operation.
• Reposition Drain Hose: Ensure the drain hose is not creating a siphon effect.
• Inspect for Kinks: Check all hoses for kinks or blockages. Straightening them can improve water flow.

When Replacement Might Be Necessary

If the above steps don’t resolve the issue, the inlet valve or water level sensor might be faulty and require replacement. Inlet valves typically cost between $30 and $75, while water level sensors can range from $20 to $60. The control board is the least likely culprit but is also the most expensive, potentially costing $100-$300. If you are not comfortable replacing these parts yourself, it is best to call a qualified appliance repair technician.

Safety Warning

• Always unplug the washing machine from the power outlet before performing any troubleshooting or repairs.
• Be careful when working with water and electricity. Avoid wet floors to prevent electric shock.
• Turn off the water supply to prevent flooding.
• If you are not comfortable working with electrical components, consult a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Adjustable wrench
• Small brush
• Bucket
• Multimeter (optional, for testing electrical components)
• Level

FAQ

Here are some frequently asked questions about washing machine water issues:

• Q: Why is my washing machine filling with water when it’s turned off? A: This is most likely due to a faulty inlet valve that is not closing properly.
• Q: How do I know if my water level sensor is bad? A: If the water level is incorrect or the machine is overfilling, the sensor may be defective.
• Q: Can high water pressure cause my washing machine to overfill? A: Yes, high water pressure can overwhelm the inlet valve and cause the machine to overfill.
• Q: Is it safe to use my washing machine if it’s continuously filling with water? A: No, it’s best to turn off the water supply and unplug the machine until the issue is resolved to prevent water damage and electrical hazards.

Conclusion

Don’t let a continuously filling washing machine ruin your day. By following these simple troubleshooting steps, you can often resolve the issue yourself and save money on repair costs. If you’ve tried everything and the problem persists, it’s time to call a qualified appliance repair technician. Remember to prioritize safety and always unplug the machine before attempting any repairs.