Introduction
A washing machine that won’t drain is a homeowner’s headache! When your LG Turbo Drum washing machine gets stuck with a tub full of water, it can disrupt your laundry routine and even lead to potential water damage. This issue often happens after a large load, when washing bulky items, or simply after years of reliable service. Addressing a “lg turbo drum not draining” problem quickly is important to prevent mold growth and further damage to your appliance.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Lg Turbo Drum Not Draining.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of lg turbo drum not draining
Several factors can contribute to your LG Turbo Drum washing machine’s draining issues. Here are some of the most common culprits:. For more related activities, check out our Kenmore Washer Not Draining Properly.
- Clogged Drain Hose: The drain hose carries water away from the washer. If it’s kinked, twisted, or blocked with lint, it can prevent proper drainage.
- Clogged Drain Pump Filter: The drain pump filter is designed to catch lint, small objects, and other debris. An accumulation of gunk here is a prime suspect.
- Obstructed Drain Pump: Sometimes, small items like socks, buttons, or even coins can slip past the filter and jam the drain pump itself.
- Kinked or Blocked Standpipe: The standpipe is the pipe that your washing machine drain hose empties into. If this is clogged, the water has nowhere to go.
- Faulty Drain Pump: Over time, the drain pump motor can weaken or fail completely, resulting in the machine’s inability to pump water out.
- Air Lock in Drain Hose: Sometimes, air can get trapped in the drain hose, preventing the water from flowing freely.
- Leveling Issues: If your washing machine isn’t properly leveled, it may affect the drain pump’s ability to function correctly.
- Control Board Malfunction: Although less common, a problem with the washing machine’s control board can sometimes prevent the drain pump from activating.
Symptoms Checklist
Here’s how to know you’re dealing with a draining problem:
- The washing machine completes the wash cycle, but the tub remains full of water.
- You hear the drain pump running (a humming or buzzing sound), but no water is being pumped out.
- You see an error code displayed on the washing machine’s control panel related to draining (e.g., “OE,” “Drain Error”).
- The draining process is significantly slower than usual.
- Water backs up into the washing machine tub from the drain standpipe.
How to Fix lg turbo drum not draining Step-by-Step Guide
Follow these steps to troubleshoot and fix your LG Turbo Drum washing machine’s draining problem:
- Unplug the Washing Machine: For safety, disconnect the power cord from the electrical outlet before you begin any troubleshooting.
- Locate the Drain Hose: This hose is usually found at the back of the washing machine.
- Inspect the Drain Hose: Check for any kinks, twists, or obstructions. Straighten the hose if necessary.
- Detach the Drain Hose: Carefully detach the drain hose from both the washing machine and the standpipe or drain connection.
- Flush the Drain Hose: Run water through the drain hose to dislodge any debris. You can use a garden hose for this.
- Check the Standpipe: If the drain hose empties into a standpipe, ensure it’s not clogged. You can use a plumbing snake or a wet/dry vacuum to clear any obstructions.
- Locate the Drain Pump Filter: This is typically located at the front of the washing machine, near the bottom. You may need a screwdriver to open an access panel.
- Drain Remaining Water: Place a shallow pan or towels under the filter access to catch any spilled water. Open the filter cap slowly to allow the water to drain out.
- Clean the Drain Pump Filter: Remove the filter and clean it thoroughly, removing any lint, hair, coins, or other debris.
- Inspect the Drain Pump: Shine a flashlight into the drain pump housing. Check for any visible obstructions that may be blocking the impeller (the pump’s rotating part). You might be able to carefully remove small objects with tweezers or pliers.
- Reassemble and Test: Reinstall the drain pump filter and drain hose. Plug the washing machine back in and run a short drain/spin cycle to see if the problem is resolved.
- Check for Error Codes: If the washing machine displays an error code, consult your owner’s manual for troubleshooting steps specific to that code.
- Level the Washing Machine: Use a level to ensure the washing machine is sitting evenly on the floor. Adjust the leveling feet as needed.
Fix the Issue Without Buying Parts
Before you consider replacing any parts, try these free methods:
- Reset the Washing Machine: Unplug the washer for 10-15 minutes to reset the control board.
- Deep Clean: Run an empty wash cycle with a washing machine cleaner to remove buildup that could be contributing to the problem.
- Recalibrate: Some models have a recalibration cycle. Check your owner’s manual for instructions.
- Inspect Regularly: Prevent future clogs by cleaning the drain pump filter every month.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and the washing machine still won’t drain, the drain pump itself might be faulty. Replacing the drain pump is a relatively straightforward repair, but it does require some technical skill. A new drain pump typically costs between $50 and $150 USD. The drain hose can also be damaged over time, which would need replacement too. Another possible failing part could be the water level sensor costing similar.
Safety Warning
- Always unplug the washing machine before performing any repairs or maintenance.
- Be careful when handling water, as it can create a slip hazard. Wipe up any spills immediately.
- Avoid touching any electrical components inside the washing machine.
- If you are not comfortable performing these repairs yourself, consult a qualified appliance repair technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Shallow pan or towels
- Flashlight
- Plumbing snake (optional)
- Wet/dry vacuum (optional)
- Level
FAQ
Here are some frequently asked questions about LG Turbo Drum washing machine draining problems:
- Q: Why is my washing machine making a loud noise when it tries to drain? A: This could indicate that there’s an object stuck in the drain pump or that the pump motor is failing.
- Q: How often should I clean the drain pump filter? A: It’s recommended to clean the drain pump filter every month, or more frequently if you wash large loads or items that produce a lot of lint.
- Q: What does the “OE” error code mean? A: The “OE” error code typically indicates a draining problem. Check the drain hose, drain pump filter, and drain pump for obstructions.
- Q: Can I use bleach to clean the drain pump filter? A: It’s generally not recommended to use bleach on the drain pump filter, as it can damage the filter material. Use warm water and a mild detergent instead.
Conclusion
Troubleshooting a “lg turbo drum not draining” issue can seem daunting, but by following these steps, you can often resolve the problem yourself. Remember to prioritize safety and take your time. If you’ve exhausted all these options and your washing machine still refuses to drain, it might be time to call a qualified appliance repair technician for professional assistance.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 4 section for step-by-step troubleshooting solutions.
