Lg Washing Machine Water Drains Out While It Is Filling


Lg Washing Machine Water Drains Out While It Is Filling

Introduction

It’s frustrating when your LG washing machine starts to fill with water, only to have it drain right back out. This issue not only prevents you from doing laundry but also wastes water and energy. It commonly happens at the beginning of a wash cycle, or sometimes even mid-cycle. Addressing this quickly is important to avoid further water waste or potential damage to your washing machine or surrounding areas.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Lg Washing Machine Water Drains Out While It Is Filling.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of LG Washing Machine Water Drains Out While It Is Filling

Here are some of the most common reasons why your LG washing machine might be draining while it’s trying to fill:. For more related activities, check out our Lg Front Load Won T Drain.

  • Drain Hose Too Low: If the drain hose is positioned too low, gravity can cause the water to siphon out as it enters the machine.
  • Drain Hose Improperly Installed: A kinked or improperly secured drain hose can also create a siphoning effect.
  • Faulty Drain Valve/Pump: A malfunctioning drain valve or pump might be opening prematurely, allowing water to escape.
  • Clogged Drain Filter: A blockage in the drain filter can sometimes cause pressure imbalances that lead to draining.
  • Air Lock in Drain Hose: Air trapped within the drain hose can also contribute to siphoning.
  • Incorrect Water Level Setting: If the water level setting is too low for the load, the machine might think it’s overfilled and drain some water.
  • Control Board Malfunction: In rare cases, a faulty control board might be sending incorrect signals to the drain pump.
  • Leaning Washing Machine: If the machine is not level, gravity could assist water draining out.

Symptoms Checklist

Use this checklist to accurately identify the issue:

  • Water drains continuously as the machine tries to fill.
  • The water level never reaches the selected fill level.
  • You can hear the drain pump running even when it shouldn’t be.
  • The machine displays an error code related to draining or water level.
  • The drain hose is positioned very low to the ground.
  • Water is leaking from around the drain hose connection.

How to Fix LG Washing Machine Water Drains Out While It Is Filling Step-by-Step Guide

Follow these steps to troubleshoot and resolve the issue:

  1. Check the Drain Hose Height: Ensure the top of the drain hose is at least 24 inches (60 cm) above the floor. Reposition it if necessary.
  2. Inspect the Drain Hose Installation: Make sure the drain hose is securely attached to the drainpipe or standpipe and isn’t kinked or bent. Secure it with zip ties if needed.
  3. Check for Siphoning: Create an air gap in the drain hose by ensuring it’s not inserted too far into the drainpipe. A small gap between the hose and the drainpipe opening is ideal.
  4. Clean the Drain Filter: Locate the drain filter (usually at the bottom front of the machine). Unscrew the access panel and carefully remove the filter. Clean it thoroughly under running water to remove any debris. Replace the filter securely.
  5. Check the Drain Valve (If Accessible): Warning: Unplug the washing machine before proceeding. Some models allow access to the drain valve/pump from the back. If you can safely access it, inspect it for any obstructions or damage.
  6. Level the Washing Machine: Use a bubble level to ensure the washing machine is perfectly level. Adjust the adjustable feet on the bottom of the machine until it is level.
  7. Run a Calibration Cycle (If Available): Some LG washing machines have a calibration cycle that can help reset the water level sensors. Consult your owner’s manual for instructions.
  8. Check for Error Codes: Consult your owner’s manual to understand the meaning of any error codes displayed on the machine’s control panel. This can provide clues about the cause of the problem.
  9. Reset the Washing Machine: Unplug the washing machine from the power outlet for 5-10 minutes. Then, plug it back in and try running a wash cycle. This can sometimes reset the control board.
  10. Inspect the Water Inlet Valves: Check the water inlet valves (where the hot and cold water hoses connect) for any blockages or leaks. Clean them if necessary.
  11. Ensure Proper Water Pressure: Make sure your home’s water pressure is adequate. Low water pressure can sometimes cause filling issues.

Fix the Issue Without Buying Parts

Many draining issues can be resolved without purchasing replacement parts. Resetting the machine, cleaning the drain filter, ensuring proper hose placement, leveling the machine, and running a calibration cycle are all free and effective methods. Regularly inspecting your hoses and filter will also help prevent future problems.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the problem persists, a faulty drain pump or control board might be the culprit. Drain pumps usually cost between $50 and $150 USD, while control boards can range from $100 to $300 USD. Contact a qualified appliance repair technician for diagnosis and part replacement.

Safety Warning

  • Always unplug the washing machine from the power outlet before attempting any repairs or inspections.
  • Avoid working on the washing machine if the floor is wet to prevent electric shock.
  • If you are uncomfortable performing any of these steps, consult a qualified appliance repair technician.
  • Turn off the water supply to the washing machine before disconnecting any hoses.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Adjustable wrench
  • Bubble level
  • Bucket
  • Towels

FAQ

Here are some frequently asked questions about washing machine draining issues:

  • Q: Why is my washing machine draining slowly? A: A clogged drain filter is often the cause of slow draining.
  • Q: Can I use a regular hose as a drain hose? A: No, you should only use a drain hose specifically designed for washing machines.
  • Q: How often should I clean the drain filter? A: It’s recommended to clean the drain filter every 1-3 months, depending on usage.
  • Q: What does a “UE” error code mean? A: A “UE” error code typically indicates an unbalanced load, which can sometimes trigger draining issues. Try redistributing the clothes in the drum.

Conclusion

Troubleshooting a washing machine that drains while filling can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Try these DIY solutions first before calling a technician. With a little patience and effort, you can get your LG washing machine back up and running smoothly.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 4

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 4 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top