Lg Front Load Won T Drain

Introduction

A washing machine that won’t drain is a common and frustrating problem. It means your clothes are stuck in a pool of dirty water, and you can’t start the next load. This issue can arise suddenly, often after washing bulky items or noticing a lingering musty smell. Addressing it quickly is essential to prevent mold growth and further damage to your appliance. Let’s get your washer working again!. Explore more in our Washing Machine Problems 4 collection.

Common Causes of LG Front Load Washer Won’t Drain

Several factors can lead to a drainage problem in your LG front load washer:

• Clogged Drain Pump Filter: This filter traps lint, hair, and small objects, and it can easily become blocked.
• Drain Hose Kink or Obstruction: A kinked or clogged drain hose prevents water from flowing freely.
• Blocked Drain Pipe: The pipe where your drain hose connects to your plumbing can be clogged.
• Faulty Drain Pump: The drain pump may be malfunctioning and unable to pump water out effectively.
• Air Lock in Drain Hose: An air bubble can sometimes get trapped in the drain hose, preventing proper drainage.
• Control Board Malfunction: In rare cases, a problem with the washer’s electronic control board can prevent the drain cycle from initiating.
• Overuse of Detergent: Excessive detergent can create suds that interfere with the draining process.
• Items Stuck in the Tub: Small objects like socks or underwear can sometimes slip past the drum and block the drain.

Symptoms Checklist

Look for these signs to confirm your washer isn’t draining properly:

• Water remains in the drum after the wash cycle is complete.
• The washer makes a humming or buzzing noise during the drain cycle but doesn’t drain.
• You receive an error code on the washer’s display panel related to draining issues (e.g., OE, dE).
• Water is draining very slowly, or only a small amount is being pumped out.
• You notice a foul odor coming from the washer, indicating stagnant water.

How to Fix LG Front Load Washer Won’t Drain Step-by-Step Guide

Follow these steps to troubleshoot and fix your draining issue:

1. Unplug the Washer: Disconnect the washer from the power outlet for safety before starting any repairs.
2. Locate the Drain Pump Filter: It’s usually behind a small access panel at the bottom front of the washer. Consult your owner’s manual for its exact location.
3. Prepare for Water Spillage: Place a shallow pan or towels under the access panel to catch any water that spills out.
4. Open the Access Panel and Remove the Filter: Carefully unscrew or unclip the access panel and remove the drain pump filter. Some models have a small drain hose next to the filter; drain this hose first if present.
5. Clean the Filter: Rinse the filter thoroughly under running water to remove any lint, hair, or debris. Use a small brush to dislodge stubborn particles.
6. Inspect the Filter Housing: Check inside the filter housing for any obstructions. You may need a flashlight to see clearly.
7. Reinstall the Filter and Access Panel: Place the clean filter back into its housing and secure the access panel.
8. Check the Drain Hose: Inspect the drain hose for any kinks, bends, or blockages. Straighten any kinks and disconnect the hose from the drain pipe if necessary.
9. Flush the Drain Hose: Use a garden hose or a sink faucet to flush out any debris from the drain hose.
10. Check the Drain Pipe: Ensure that the drain pipe where the drain hose connects is not clogged. You can use a plumbing snake to clear any blockages.
11. Inspect the Area around the Drum: Look inside the drum where you found the socks or other items, because more objects can come loose that block the waterflow from the drum into the pump system.
12. Reconnect the Drain Hose: Reattach the drain hose to the drain pipe, making sure it’s securely connected.
13. Run a Test Cycle: Plug the washer back in and run a short drain/spin cycle to see if the issue is resolved.
14. Check for Error Codes: If the washer still displays an error code, consult your owner’s manual for troubleshooting specific to that code.

Fix the Issue Without Buying Parts

Before considering replacing parts, try these free methods:

• Washer Reset: Unplug the washer for at least 30 minutes to reset the control board.
• Cleaning Cycle: Run a cleaning cycle with a washing machine cleaner to remove buildup and prevent clogs.
• Check for Excessive Suds: Use only the recommended amount of HE (High Efficiency) detergent.
• Regular Cleaning: Wipe down the rubber door seal and clean the detergent dispenser regularly to prevent mold and mildew buildup.

When Replacement Might Be Necessary

If the above steps don’t solve the problem, the drain pump might be faulty and require replacement. Drain pump replacement costs typically range from $100 to $300 (USD), including the part and labor. Other parts that could potentially fail are the water level sensor or the control board, but these are less common. If you are not comfortable with appliance repair, consulting a qualified technician is recommended. For more related activities, check out our Lg Top Load Washer Not Spinning.

Safety Warning

• Always unplug the washer before performing any repairs.
• Avoid working on electrical components with wet hands.
• Be careful when handling water, as wet floors can be slippery.
• If you are unsure about any step, consult a qualified technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Shallow pan or towels
• Flashlight
• Garden hose or sink faucet
• Plumbing snake (optional)
• Gloves

FAQ

Here are some frequently asked questions about draining issues:

• Q: My washer is making a humming noise but not draining. What could be the problem?
  A: This usually indicates a blockage in the drain pump or a faulty drain pump motor. Clean the drain pump filter first.
• Q: The “OE” error code is showing on my LG washer. What does it mean?
  A: The “OE” error code typically indicates a drain error. Check the drain hose for kinks and clogs, and clean the drain pump filter.
• Q: How often should I clean the drain pump filter?
  A: It’s recommended to clean the drain pump filter every 1-3 months, depending on usage and the amount of lint produced.
• Q: Can I use regular detergent in my LG front load washer?
  A: No, you should only use HE (High Efficiency) detergent in front load washers to prevent excessive suds and damage to the machine.

Conclusion

Troubleshooting a draining issue in your LG front load washer can often be resolved with a few simple steps. By following this guide, you can likely get your washer back in working order without having to call a repair technician. If the problem persists after trying these solutions, don’t hesitate to seek professional assistance. Happy washing!. Discover more free resources across our collection library.

Youtube Video: