Whirlpool Refrigerator Compressor Running But Not Cooling


Whirlpool Refrigerator Compressor Running But Not Cooling

Introduction

When your Whirlpool refrigerator’s compressor is running, you expect cold air. But what happens when the compressor hums along and your food starts to spoil? This frustrating situation, where the compressor is working but the fridge isn’t cooling, is a common issue. It means something is preventing the cooling process even though the core component is operational. Addressing this quickly is crucial to prevent food spoilage and unnecessary energy consumption. Its important to tackle this issue promptly to save your groceries and your sanity!

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Whirlpool Refrigerator Compressor Running But Not Cooling.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Whirlpool Refrigerator Compressor Running But Not Cooling

Here are some common reasons why your Whirlpool refrigerator might be running but not cooling:

  • Dirty Condenser Coils: Dust and debris on the coils prevent heat dissipation.
  • Frozen Evaporator Coils: Frost buildup blocks airflow.
  • Faulty Start Relay: The relay might be failing to start the compressor efficiently.
  • Defective Condenser Fan Motor: The fan isn’t blowing air across the condenser coils.
  • Defective Evaporator Fan Motor: The fan isn’t circulating cold air inside the refrigerator.
  • Refrigerant Leak: Low refrigerant levels hinder cooling.
  • Damaged Door Seals: Warm air enters the refrigerator, reducing cooling efficiency.
  • Restricted Airflow: Overcrowding the refrigerator can restrict proper air circulation.
  • Damaged or Malfunctioning Thermistor: Not reading the temperature correctly.

Symptoms Checklist

Here are some signs to help you confirm the problem:

  • The refrigerator compartment feels warm to the touch.
  • The freezer compartment is also not reaching freezing temperatures.
  • You hear the compressor running (a humming sound), but no cold air is being produced.
  • Food spoils faster than usual.
  • The refrigerator is running more frequently or constantly.
  • You see frost buildup on the back wall of the freezer (potentially).
  • The condenser fan located near the compressor, is not running.
  • The Evaporator fan inside the fridge is not running.

How to Fix Whirlpool Refrigerator Compressor Running But Not Cooling Step-by-Step Guide

Follow these steps to troubleshoot your Whirlpool refrigerator:

  1. Unplug the Refrigerator: Before you begin, disconnect the refrigerator from the power outlet for safety.
  2. Clean the Condenser Coils: Locate the coils (usually on the back or bottom). Use a vacuum cleaner with a brush attachment to remove dust and debris.
  3. Check the Condenser Fan: Ensure the condenser fan near the compressor is running when the compressor is on. If not, it might need to be replaced (we will get to this later).
  4. Inspect the Evaporator Fan: Open the freezer door and listen for the evaporator fan. If you don’t hear it running, manually try to spin the blades. If they don’t spin freely, or if it is loud, it might be the motor.
  5. Check for Ice Buildup: If the evaporator coils are frozen over, the defrost system might be faulty.
  6. Manually Defrost: Turn off the refrigerator and leave the doors open for 24 hours to melt any ice buildup. Place towels to absorb water.
  7. Inspect Door Seals: Check the door seals for damage or gaps. Clean the seals with warm, soapy water to remove any debris.
  8. Adjust Temperature Settings: Make sure the temperature settings are correct. Sometimes, accidentally turning the temperature too high can cause cooling issues.
  9. Check the Start Relay: This part may be difficult to access, it is attached to the compressor. If the compressor starts after a long period, the start rely can be faulty.
  10. Verify Airflow: Ensure that food items aren’t blocking the vents inside the refrigerator and freezer compartments.
  11. Organize the Refrigerator: Avoid overcrowding the refrigerator to allow for proper air circulation.
  12. Plug the Refrigerator Back In: After completing these checks, plug the refrigerator back into the power outlet.
  13. Monitor Cooling: Give the refrigerator 24 hours to stabilize. Check if the temperature is gradually decreasing.
  14. Observe the Compressor: Check to see if the compressor is turning off and on.

Fix the Issue Without Buying Parts

Here are some free methods to try before considering replacements:

  • Reset the Refrigerator: Unplug the refrigerator for 30 minutes to reset the system.
  • Deep Cleaning: Thoroughly clean the inside and outside of the refrigerator, including the door seals.
  • Recalibrate Temperature Settings: Review the owner’s manual for recommended temperature settings and adjust accordingly.
  • Regular Inspection: Periodically inspect the condenser coils and door seals for cleanliness and damage.
  • Proper Loading: Avoid overcrowding the refrigerator and blocking vents.

When Replacement Might Be Necessary

If the above steps don’t resolve the issue, a replacement might be needed. Here are some components that commonly fail:. For more related activities, check out our Whirlpool Refrigerator Ice Machine Not Making Ice.

  • Condenser Fan Motor: $50-$150
  • Evaporator Fan Motor: $40-$120
  • Start Relay: $20 – $60
  • Compressor: $300-$800 (requires professional installation)

Safety Warning

  • Always unplug the refrigerator before performing any maintenance or repairs.
  • Avoid working on electrical components if you’re not comfortable with electrical work.
  • Be careful when handling sharp tools or components.
  • Keep children and pets away from the work area.
  • Ensure the floor is dry to avoid electrical shock.

Tools You May Need

  • Vacuum cleaner with brush attachment
  • Screwdrivers (Phillips and flathead)
  • Multimeter (for testing electrical components optional)
  • Adjustable wrench
  • Cleaning cloths
  • Warm water and mild detergent

FAQ

Here are some frequently asked questions:

  • Q: How do I know if the compressor is actually running?
    A: Place your hand on the compressor (usually at the back, bottom of the fridge). You should feel slight vibrations and hear a humming sound.
  • Q: Why are my condenser coils getting so dusty?
    A: Condenser coils attract dust due to static electricity. Regular cleaning is essential for efficient cooling.
  • Q: How often should I clean the condenser coils?
    A: It’s recommended to clean the condenser coils every 6 months to a year, depending on the environment.
  • Q: What if I still don’t feel cold air after all these steps?
    A: It’s likely a refrigerant leak or compressor problem, which requires professional assistance.

Conclusion

Troubleshooting a Whirlpool refrigerator that’s running but not cooling can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Remember to start with the simplest solutions first, such as cleaning the condenser coils and checking the door seals. If you’ve tried everything and the problem persists, don’t hesitate to call a qualified appliance repair technician. Fixing it yourself can save you money, but safety and proper repair are most important.

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 5

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 5 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top