Whirlpool Refrigerator Clicking Noise Not Cooling


Whirlpool Refrigerator Clicking Noise Not Cooling

Introduction

Is your Whirlpool refrigerator making a clicking noise and failing to keep your food cold? This is a common problem that homeowners face, and it’s definitely something you want to address quickly. Food spoilage can be expensive and potentially lead to health risks. The clicking noise often indicates that a component is trying to start but failing, which is why your refrigerator isn’t cooling properly. Let’s explore the possible causes and how you can troubleshoot this issue yourself.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Whirlpool Refrigerator Clicking Noise Not Cooling.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Whirlpool Refrigerator Clicking Noise Not Cooling

Here are some of the most frequent reasons behind a Whirlpool refrigerator clicking noise and cooling failure:

  • Start Relay Failure: The start relay helps the compressor kick on. A faulty relay can cause a clicking sound as it attempts to start the compressor but fails.
  • Compressor Problems: The compressor is the heart of the cooling system. If it’s failing, it might click as it tries to start.
  • Condenser Fan Motor Issues: The condenser fan helps dissipate heat from the compressor. A failing motor can make clicking noises and prevent proper cooling.
  • Evaporator Fan Motor Problems: The evaporator fan circulates cold air inside the refrigerator. If it’s blocked by ice or malfunctioning, it can make clicking sounds.
  • Defrost System Malfunction: If the defrost system isn’t working correctly, ice can build up on the evaporator coils, hindering cooling and potentially causing noises.
  • Overload Protector Tripping: The overload protector protects the compressor from overheating. If it’s tripping frequently, it could be due to a compressor issue or another electrical problem.
  • Power Supply Problems: Intermittent power or a loose connection can sometimes cause a clicking noise.
  • Dirty Condenser Coils: Dust and debris on the condenser coils can cause the compressor to work harder, potentially leading to overheating and clicking.

Symptoms Checklist

Use this checklist to help pinpoint the issue:

  • Clicking noise coming from the back or bottom of the refrigerator.
  • Refrigerator is not cooling, or cooling is inconsistent.
  • Food is spoiling faster than usual.
  • Freezer may or may not be cooling properly.
  • The compressor feels very hot to the touch.
  • The refrigerator runs constantly, or not at all.
  • Error codes displayed on the refrigerator’s control panel (if applicable).

How to Fix Whirlpool Refrigerator Clicking Noise Not Cooling Step-by-Step Guide

Follow these steps to troubleshoot your refrigerator:

  1. Unplug the Refrigerator: Safety first! Disconnect the refrigerator from the power outlet before you start any troubleshooting.
  2. Clean the Condenser Coils: Locate the condenser coils (usually at the back or bottom of the refrigerator). Use a vacuum cleaner with a brush attachment to remove dust and debris.
  3. Check the Condenser Fan: Make sure the condenser fan is spinning freely. If it’s obstructed, remove the obstruction. If it’s not spinning at all, it might be faulty (we’ll address that later).
  4. Listen to the Compressor: After plugging the fridge back in briefly (observe only and immediately unplug), can you hear the compressor trying to start? Is the clicking noise coming from that area?
  5. Check the Start Relay: The start relay is usually attached to the compressor. It’s a small, black component. You cant visually assess this, but take note of its position.
  6. Check the Evaporator Fan: Open the freezer and listen for the evaporator fan. If you don’t hear it running, it could be blocked by ice or faulty.
  7. Defrost the Refrigerator: If you suspect ice buildup, manually defrost the refrigerator. Unplug it, remove all food, and leave the door open for 24-48 hours. Place towels underneath to catch melting water.
  8. Check the Door Seals: Make sure the door seals are clean and sealing properly. A poor seal can cause the refrigerator to work harder and potentially lead to cooling issues.
  9. Inspect the Overload Protector: The overload protector is usually located near the compressor alongside the start relay.
  10. Check the Power Outlet: Make sure the outlet is working correctly by plugging in another appliance.
  11. Reset the Refrigerator: Sometimes, simply unplugging the refrigerator for 5-10 minutes and then plugging it back in can reset the system and resolve the issue.
  12. Listen for Any Changes: After performing these checks, plug the refrigerator back in and listen carefully. Has the clicking noise stopped? Is the refrigerator starting to cool?
  13. Monitor the Temperature: Place a thermometer inside the refrigerator and freezer to monitor the temperature over the next few hours.

Fix the Issue Without Buying Parts

Before you consider replacing any parts, try these free methods:

  • Full Defrost: As mentioned earlier, a thorough defrost can often resolve cooling issues caused by ice buildup.
  • Coil Cleaning: Regularly cleaning the condenser coils prevents the compressor from overworking.
  • Door Seal Maintenance: Keep door seals clean and free of debris. You can use a damp cloth to wipe them down.
  • Refrigerator Placement: Ensure the refrigerator has adequate space around it for proper ventilation. Don’t pack it too tightly into a corner.

When Replacement Might Be Necessary

If the clicking noise persists and the refrigerator isn’t cooling after trying the above steps, a component might need replacement. The most common culprits are the start relay (estimated cost: $20-$50 USD), the condenser fan motor (estimated cost: $50-$100 USD), or, in the worst case, the compressor (estimated cost: $200-$500 USD, plus professional installation). Replacing the compressor is usually best left to a qualified technician. For more related activities, check out our Fridge Water Line Leaking In Wall.

Safety Warning

  • Always unplug the refrigerator before performing any maintenance or repairs.
  • Avoid working on electrical components if you are not comfortable doing so.
  • Be careful when handling the condenser coils, as they can be sharp.
  • Keep water away from electrical components.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Vacuum cleaner with brush attachment
  • Wrench or socket set
  • Multimeter (optional, for testing electrical components)
  • Thermometer

FAQ

Here are some frequently asked questions:

  • Q: Why is my refrigerator clicking but not cooling? A: The clicking noise usually indicates that a component (often the compressor or start relay) is trying to start but failing.
  • Q: How do I know if my compressor is bad? A: If the compressor is very hot, clicking, and the refrigerator isn’t cooling, it’s likely faulty. A multimeter can also be used to test its continuity.
  • Q: Can I fix my refrigerator myself? A: Many common refrigerator problems can be fixed with simple troubleshooting steps. However, if you’re not comfortable working with electrical components, it’s best to call a professional.
  • Q: How often should I clean my refrigerator coils? A: It’s recommended to clean the condenser coils at least every six months, or more often if you have pets.

Conclusion

A Whirlpool refrigerator clicking noise and cooling problem can be frustrating, but often it’s something you can troubleshoot yourself. By following these steps, you can identify the cause of the problem and potentially fix it without needing to call a technician. Remember to prioritize safety and always unplug the refrigerator before starting any work. If you’ve tried these steps and the issue persists, it might be time to call a qualified appliance repair professional.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 1

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 1 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top