Water Not Stopping In Lg Washing Machine

Introduction

Finding your LG washing machine continuously filling with water, even when it’s not supposed to be, can be quite a headache. This means the machine isn’t stopping the water flow at the right time, which can lead to overflowing, water damage, and a hefty water bill! It often happens after a wash cycle finishes or even when the machine is turned off. Addressing this problem quickly is important to avoid further damage and get your laundry routine back on track. Explore more in our Washing Machine Problems 6 collection.

Common Causes of Water Not Stopping in LG Washing Machine

Here are some of the usual suspects behind this frustrating issue:

• Faulty Water Inlet Valve: This valve controls the flow of water into the machine. If it’s stuck open, water will continuously trickle or gush in.
• Blocked Drain Hose: A clogged drain hose prevents the water from leaving the machine, causing it to overfill.
• Defective Water Level Sensor: This sensor tells the machine how much water is inside. If it’s not working properly, the machine might not realize it’s full.
• Damaged Drain Pump: If the drain pump isn’t working properly, water won’t be pumped out effectively, leading to overflow.
• Clogged Air Dome: The air dome helps the water level sensor function correctly. If it’s blocked, the sensor can give incorrect readings.
• Software Glitch: Sometimes, the machine’s computer can experience a glitch, causing it to mismanage the water intake.
• Kinked or Twisted Drain Hose: This restricts water flow and can cause backups inside the washing machine.
• Too Much Soap: Using excessive detergent can cause suds to build up and interfere with the water level sensor.

Symptoms Checklist

Look for these signs to confirm the issue:

• Water continuously entering the washing machine, even when it’s off.
• Water overflowing from the detergent dispenser or the door.
• The washing machine making unusual noises, especially during idle times.
• Error codes related to water levels or draining displayed on the control panel.
• Water remaining in the drum long after the cycle has finished.

How to Fix Water Not Stopping in LG Washing Machine Step-by-Step Guide

Follow these steps to diagnose and fix the problem:

1. Unplug the Washing Machine: For safety, always disconnect the power before troubleshooting.
2. Check the Drain Hose: Make sure it’s not kinked, twisted, or blocked. Straighten any bends and remove any visible debris.
3. Inspect the Drain Opening: Look inside the drainpipe where the drain hose connects. Remove any lint, hair, or other blockages.
4. Examine the Water Inlet Hoses: Check the hoses that connect the washing machine to the water supply for kinks or damage.
5. Clean the Water Inlet Valve Filters: Turn off the water supply to the machine. Disconnect the inlet hoses and clean the small filters inside the inlet valve openings. Use a small brush or pliers to remove any debris.
6. Locate the Water Level Sensor: It’s usually a small, round component with a hose connected to it. Refer to your LG washing machine’s manual for the exact location.
7. Check the Air Dome: Locate the air dome (a small chamber connected to the water level sensor hose). Disconnect the hose and blow into it to clear any blockages.
8. Run a Calibration Cycle (if available): Some LG models have a calibration cycle that can reset the water level sensor. Refer to your owner’s manual for instructions.
9. Reduce Soap Usage: Overuse of detergent, especially non-HE (High Efficiency) detergent, can create excessive suds that interfere with the water level sensor. Use the recommended amount of HE detergent.
10. Check for Error Codes: Note any error codes displayed on the machine’s control panel. Look up the code in your owner’s manual to understand what it means.
11. Run a Test Cycle: After making adjustments, run a short wash cycle to see if the problem is resolved. Monitor the water level closely.
12. Check the Drain Pump Filter: Usually found at the bottom front of the machine. Remove it and clean any debris that might be clogging it.

Fix the Issue Without Buying Parts

Often, you can resolve the problem without spending any money:

• Reset the Machine: Unplug the washer for 10 minutes, then plug it back in. This can sometimes clear minor software glitches.
• Clean the Hoses: Flush out the drain and inlet hoses with water to remove any build-up.
• Recalibrate: Check your user manual for instructions to recalibrate the water level sensor.
• Regular Maintenance: Run a cleaning cycle with a washing machine cleaner monthly to prevent build-up.

When Replacement Might Be Necessary

If the problem persists after trying these solutions, a part might need replacing. Common culprits are:

• Water Inlet Valve: If the valve is constantly open, it needs replacement. Expect to pay $30-$80 for the part.
• Water Level Sensor: If the sensor is consistently giving incorrect readings, replacement is needed. Parts cost ranges from $20-$60.
• Drain Pump: If the drain pump is making strange noises or failing to pump out water, it’s likely faulty. Expect a cost of $40-$100.

Safety Warning

• Always unplug the washing machine before performing any repairs.
• Turn off the water supply before disconnecting any water hoses.
• Be careful when handling water to avoid slips and falls.
• If you’re uncomfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Bucket
• Towels
• Small brush or old toothbrush

FAQ

Here are some common questions about this issue:

1. Q: Why is my LG washer filling with water when it’s turned off?
   A: This is most likely due to a faulty water inlet valve that isn’t closing properly.
2. Q: How can I tell if my water level sensor is bad?
   A: If the machine consistently overfills or underfills, and cleaning the air dome doesn’t help, the sensor might be bad.
3. Q: Is it safe to use the washing machine if it’s continuously filling with water?
   A: No, it’s not safe. Unplug the machine immediately to prevent water damage and potential electrical hazards.
4. Q: How often should I clean my washing machine’s drain pump filter?
   A: Ideally, you should clean it every 2-3 months, or more frequently if you wash a lot of lint-producing items.

Conclusion

Don’t panic if your LG washing machine won’t stop filling with water! By following these troubleshooting steps, you can often identify and fix the problem yourself. Take your time, work carefully, and remember safety first. If you’ve tried everything and the issue persists, don’t hesitate to call a qualified appliance repair technician for assistance. Good luck!

Youtube Video: