Washing Machine Will Not Drain Water


Washing Machine Will Not Drain Water

Introduction

Discovering your washing machine full of water after a cycle is frustrating and messy. A washing machine that won’t drain is a common problem that can stem from several issues. Not only does it prevent you from doing laundry, but leaving standing water in your machine can lead to mold growth and unpleasant odors. Addressing this problem quickly is important to avoid further damage and get your laundry routine back on track.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Washing Machine Will Not Drain Water.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Washing Machine Will Not Drain Water

Here are some common reasons why your washing machine might be refusing to drain:

  • Clogged Drain Hose: The drain hose can become blocked with lint, small objects (like socks!), or soap residue.
  • Clogged Drain Pump Filter: Many washing machines have a filter to catch debris before it reaches the pump. This filter can become clogged.
  • Drain Pump Malfunction: The drain pump is responsible for pushing the water out. If it’s faulty, it won’t be able to do its job.
  • Blocked Drainpipe: The pipe where your drain hose connects to the wall can be clogged, preventing water from flowing out.
  • Kinked or Damaged Drain Hose: A kink in the hose can restrict water flow.
  • Lid Switch Problem: In some machines, the lid switch needs to be engaged for the drain cycle to start. If it’s broken, the machine might not drain.
  • Faulty Timer or Control Board: These components control the different cycles, including draining. A malfunction can prevent the drain cycle from activating.
  • Air Lock in the Drain Hose: Sometimes air can get trapped in the drain hose, preventing the water from draining.

Symptoms Checklist

Use this checklist to help pinpoint the problem:

  • Washing machine is full of water after the wash cycle.
  • You hear a humming sound, but no water is draining.
  • No sound at all during the drain cycle.
  • Error code displayed on the washing machine’s control panel.
  • Water drains very slowly.
  • Water drains, but the pump sounds unusually loud.

How to Fix Washing Machine Will Not Drain Water Step-by-Step Guide

Follow these steps to troubleshoot and fix the problem:

  1. Unplug the Washing Machine: Safety first! Disconnect the power cord from the outlet.
  2. Locate the Drain Hose: This hose is usually at the back of the machine.
  3. Inspect the Drain Hose for Kinks: Straighten out any kinks or bends in the hose.
  4. Detach the Drain Hose: Carefully detach the hose from the drainpipe (usually located in the wall). Have a bucket ready to catch any remaining water.
  5. Check the Drainpipe: Insert a flexible wire or a drain snake into the drainpipe to check for clogs. Clear any blockage you find.
  6. Clean the Drain Hose: Flush the drain hose with water to remove any debris. You can use a garden hose for this.
  7. Locate the Drain Pump Filter: This filter is usually located at the front bottom of the washing machine, behind a small access panel. Consult your owner’s manual if you can’t find it.
  8. Clean the Drain Pump Filter: Open the access panel and carefully remove the filter. Clean it thoroughly, removing any lint, hair, or debris.
  9. Inspect the Drain Pump: With the filter removed, look inside the drain pump housing. Check for any obstructions that might be blocking the impeller (the pump’s spinning part). You might need pliers to remove larger objects.
  10. Reassemble the Drain Pump Filter: Place the clean filter back into its housing and close the access panel.
  11. Reattach the Drain Hose: Securely reattach the drain hose to the drainpipe.
  12. Plug in the Washing Machine: Reconnect the power cord to the outlet.
  13. Run a Test Cycle: Select a drain and spin cycle to test if the washing machine is now draining properly.
  14. Check for Air Lock: If the machine still doesn’t drain, try carefully lowering the drain hose on the ground to release any trapped air while a drain cycle is active.

Fix the Issue Without Buying Parts

Here are some things you can try that don’t involve buying new parts:

  • Reset the Washing Machine: Unplug the machine for 1-2 minutes, then plug it back in. This can sometimes reset the control board and resolve minor glitches.
  • Deep Clean the Washing Machine: Run an empty cycle with a washing machine cleaner to remove soap buildup and prevent future clogs.
  • Check the User Manual: Your user manual might have troubleshooting steps specific to your model.
  • Ensure Proper Hose Installation: Make sure the drain hose isn’t pushed too far into the drainpipe, as this can create a siphoning effect.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washing machine still won’t drain, the drain pump itself might be faulty. A new drain pump can cost anywhere from $50 to $200 USD, depending on the model. Other parts that can fail and require replacement include the lid switch ($20-$50 USD) and the control board ($100-$300 USD). Before replacing any parts, consider the age and overall condition of your washing machine. If it’s an older machine, it might be more cost-effective to replace the entire unit.

Safety Warning

  • Always unplug the washing machine before performing any repairs.
  • Be careful when handling water to avoid slips and falls.
  • If you’re not comfortable working with electrical appliances, consult a qualified technician.
  • Avoid touching any internal components while the machine is plugged in.
  • Do not overload the washing machine, as this can strain the drain pump.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Bucket
  • Flexible wire or drain snake
  • Towels
  • Work gloves

FAQ

Here are some frequently asked questions about washing machine draining issues:

  • Q: Why is my washing machine making a humming noise but not draining?
    A: This usually indicates a blockage in the drain pump or a faulty drain pump motor.
  • Q: How do I know if my drain pump is bad?
    A: If the pump makes no noise or a very faint humming noise, and the impeller doesn’t spin freely when you try to turn it manually, the pump is likely faulty.
  • Q: Can I use Drano to unclog my washing machine drain?
    A: It’s generally not recommended, as harsh chemicals like Drano can damage the plastic components of your washing machine.
  • Q: How often should I clean my washing machine’s drain pump filter?
    A: It’s a good idea to clean it every 1-3 months, depending on how often you use your washing machine.
  • Q: Why is my washing machine draining slowly?
    A: It could be partial blockage, a kinked hose, or a sign the drain pump is wearing out.

Conclusion

Troubleshooting a washing machine that won’t drain can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Remember to prioritize safety and take your time. If you’ve exhausted all the troubleshooting options and are still experiencing issues, it might be time to consult a qualified appliance repair technician. However, with a little effort, you can often save yourself a costly repair bill and get your laundry routine back on track!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top