Washing Machine Making Loud Noise When Draining


Washing Machine Making Loud Noise When Draining

Introduction

A loud, grinding, or gurgling noise coming from your washing machine during the draining cycle is a common problem for homeowners. It usually indicates that something is obstructing the drain system or that a component is failing. Ignoring this noise can lead to more serious issues like water damage from leaks or a complete washing machine breakdown. It’s essential to address the problem promptly to prevent costly repairs and keep your laundry routine running smoothly.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Washing Machine Making Loud Noise When Draining.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Washing Machine Making Loud Noise When Draining

Here are some of the most frequent causes of a noisy washing machine during draining:

  • Foreign Objects in the Drain Pump: Small items like coins, buttons, or socks can get caught in the drain pump, causing rattling or grinding noises.
  • Clogged Drain Hose: Lint, hair, and debris can accumulate in the drain hose, restricting water flow and creating suction noises.
  • Drain Pump Failure: A worn-out or damaged drain pump motor can produce a loud humming or buzzing sound.
  • Blocked Drainpipe: If the drainpipe where the washing machine empties is clogged, it can cause water to back up and create gurgling noises.
  • Loose Pump Belt: In older machines with belts, a loose or worn belt can slip and squeal during the drain cycle.
  • Air in the Drain System: Air trapped in the drain lines can cause gurgling or bubbling sounds.
  • Worn Bearings in the Motor: While less directly related to draining, worn motor bearings can amplify noises during all cycles, including drain.
  • Improper Installation: If the drain hose isn’t properly positioned or secured, it can vibrate against the machine or wall.

Symptoms Checklist

Use this checklist to identify the problem accurately:

  • Loud grinding, gurgling, humming, or buzzing noise during the drain cycle.
  • Water draining slowly or not at all.
  • Vibration or shaking of the washing machine.
  • Water backing up into the washing machine drum.
  • Unusual smells coming from the washing machine.
  • Noise is only present during the drain cycle.

How to Fix Washing Machine Making Loud Noise When Draining Step-by-Step Guide

  1. Unplug the Washing Machine: Disconnect the washing machine from the power outlet for safety.
  2. Locate the Drain Hose: Find the drain hose connected to the back of the washing machine.
  3. Inspect the Drain Hose: Detach the drain hose from the drainpipe and check for any kinks, clogs, or damage.
  4. Clear the Drain Hose: Use a long, flexible brush or a plumbing snake to remove any debris from the drain hose.
  5. Check the Drainpipe: Ensure the drainpipe is not clogged. You can use a drain snake to clear any blockages.
  6. Locate the Drain Pump: The drain pump is usually located at the bottom front or back of the washing machine. Consult your owner’s manual for the exact location.
  7. Access the Drain Pump: Depending on your model, you may need to remove a panel or access it from underneath the machine.
  8. Check the Drain Pump Filter: Many washing machines have a filter on the drain pump to catch debris. Remove and clean the filter thoroughly.
  9. Inspect the Drain Pump Impeller: Check the drain pump impeller (the rotating part) for any obstructions. Remove any foreign objects that may be stuck.
  10. Reassemble and Test: Reconnect the drain hose and plug in the washing machine. Run a short drain cycle to see if the noise is gone.
  11. Check for Leaks: After running the drain cycle, inspect for any water leaks around the drain hose and pump connections. Tighten connections if necessary.
  12. Level the Washing Machine: Use a level to make sure the washing machine is balanced. Uneven machines can vibrate and cause noise. Adjust the leveling feet if needed.

Fix the Issue Without Buying Parts

Sometimes, you can resolve the noise without replacing any parts:

  • Reset the Washing Machine: Unplug the machine for 5 minutes, then plug it back in. This can sometimes reset the control panel and resolve minor issues.
  • Run a Cleaning Cycle: Use a washing machine cleaner to remove buildup and debris.
  • Inspect Connections: Ensure all hoses and connections are tight and secure.
  • Proper Loading: Avoid overloading the washing machine, as this can strain the motor and pump.
  • Check for Proper Ventilation: Ensure adequate airflow around the washing machine to prevent overheating, which can contribute to motor noise.

When Replacement Might Be Necessary

If the noise persists after trying the troubleshooting steps, the drain pump itself might be failing and require replacement. A new drain pump can cost between $50 and $200 USD, depending on the model. Other parts that commonly fail are the drain hose ($10-$30) and the pump belt (on older models, $10-$20).

Safety Warning

  • Always unplug the washing machine before performing any repairs.
  • Avoid standing in water while working on electrical appliances.
  • Be careful when handling sharp objects or tools.
  • If you are not comfortable performing the repairs yourself, consult a qualified appliance repair technician.
  • Wear gloves to protect your hands from dirty water and potential contaminants.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Adjustable wrench
  • Bucket
  • Shop towels
  • Plumbing snake or flexible brush
  • Gloves
  • Flashlight

FAQ

Here are some frequently asked questions:

  • Q: Why is my washing machine making a loud humming noise when draining?
    A: This often indicates a problem with the drain pump motor. Check for obstructions or consider replacing the pump.
  • Q: Can a clogged drain hose cause a loud noise?
    A: Yes, a clogged drain hose can restrict water flow and create gurgling or suction noises. Clean the drain hose thoroughly.
  • Q: How do I access the drain pump on my washing machine?
    A: Consult your owner’s manual for the exact location and access instructions. It usually involves removing a panel at the bottom front or back of the machine.
  • Q: Is it safe to run my washing machine if it’s making a loud noise?
    A: It’s best to avoid running the washing machine until you’ve identified and resolved the issue to prevent further damage.
  • Q: How often should I clean my washing machine drain filter?
    A: Ideally, you should clean the drain filter every 3-6 months, or more frequently if you notice slow draining or unusual noises.

Conclusion

Dealing with a noisy washing machine can be frustrating, but with a little patience and these troubleshooting steps, you can often resolve the issue yourself. By checking for obstructions, cleaning components, and inspecting for damage, you can save money and avoid costly repairs. However, if you’re uncomfortable tackling the problem on your own, don’t hesitate to call a qualified appliance repair technician. They have the expertise to diagnose and fix the issue quickly and safely.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top