Washing Machine Loud When Draining


Washing Machine Loud When Draining

Introduction

A washing machine that becomes excessively loud during the drain cycle is a common problem, and it can be quite alarming. The loud noises, which may sound like grinding, gurgling, or even a high-pitched whine, are often indicators of underlying issues that need attention. While a washing machine will naturally make some noise, excessively loud draining is a red flag. This isn’t just a matter of annoyance; ignoring these sounds could lead to more serious problems, potentially causing damage to the washing machine itself or even water damage in your home. Addressing the issue promptly can save you money and prevent further complications.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Washing Machine Loud When Draining.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Washing Machine Loud When Draining

Here are some of the most common reasons why your washing machine might be making loud noises when draining:. For more related activities, check out our Water In Front Of Washing Machine.

  • Foreign Objects in the Drain Pump: Small items like coins, buttons, or socks can get past the lint filter and lodge in the drain pump, causing rattling or grinding sounds.
  • Worn or Damaged Drain Pump: Over time, the drain pump motor can wear out or the impeller (the spinning part of the pump) can become damaged, leading to increased noise.
  • Clogged Drain Hose: A blockage in the drain hose can restrict water flow and cause the pump to work harder, resulting in loud gurgling or straining noises.
  • Kinked or Restricted Drain Hose: If the drain hose is bent sharply or compressed, it can impede water flow and cause the pump to overwork.
  • Clogged Drainpipe: The pipe where your washing machine drains into (often in the wall) can become clogged with lint, hair, or other debris, causing backpressure and noise.
  • Air in the Drain System: Sometimes, air can get trapped in the drain system, creating gurgling or bubbling sounds during draining.
  • Loose Pump Mounting: If the drain pump isn’t securely mounted, it can vibrate excessively and create a lot of noise.
  • Worn Pump Motor Bearings: The bearings in the drain pump motor can wear out over time, leading to a high-pitched whining or screeching noise.

Symptoms Checklist

Use this checklist to help pinpoint the problem:

  • Loud grinding, rattling, or whining noise specifically during the drain cycle.
  • The machine drains slowly or not at all.
  • Water is left in the washing machine drum after the drain cycle.
  • You notice a burning smell coming from the washing machine.
  • The washing machine vibrates excessively during draining.
  • The drain hose jumps or vibrates violently.

How to Fix Washing Machine Loud When Draining Step-by-Step Guide

Follow these steps to troubleshoot the loud draining issue:

  1. Unplug the Washing Machine: Safety first! Disconnect the washing machine from the power outlet before doing any work.
  2. Inspect the Drain Hose: Check the drain hose for any kinks, bends, or obstructions. Straighten any kinks and ensure the hose isn’t compressed.
  3. Disconnect the Drain Hose: Carefully detach the drain hose from both the washing machine and the drainpipe in the wall.
  4. Check the Drain Hose for Blockages: Hold the drain hose up to the light and look for any visible obstructions. You can also flush it out with water to dislodge any debris.
  5. Inspect the Drainpipe: Check the drainpipe in the wall for any clogs. You can use a drain snake or a plumber’s snake to clear any obstructions.
  6. Locate the Drain Pump: Refer to your washing machine’s owner’s manual to find the location of the drain pump. It’s usually located at the bottom front or back of the machine.
  7. Access the Drain Pump: You may need to remove a panel or access cover to reach the drain pump.
  8. Check the Drain Pump Filter: Many washing machines have a small filter in front of the drain pump to catch debris. Open the filter access and clean out any lint, coins, or other foreign objects. Be prepared for some water to spill out.
  9. Inspect the Drain Pump Impeller: With the filter removed, you should be able to see the drain pump impeller. Check for any obstructions or damage. Try to spin the impeller by hand to see if it moves freely.
  10. Listen to The Noise: If nothing looks out of the ordinary, plug back the washing machine and run draining cycle to listen to noise.
  11. Reassemble and Test: Once you’ve checked and cleaned everything, reassemble the washing machine, reconnect the drain hose, and plug the machine back in. Run a test drain cycle to see if the noise is gone.
  12. Level the Washing Machine: An unbalanced machine can cause vibrations and noises. Use a level to ensure the washing machine is sitting level on the floor. Adjust the leveling feet as needed.

Fix the Issue Without Buying Parts

Before considering replacing any parts, try these free methods:

  • Reset the Washing Machine: Unplug the washing machine for 10 minutes, then plug it back in. This can sometimes reset the electronic controls and resolve minor issues.
  • Clean the Washing Machine: Run a cleaning cycle with a washing machine cleaner to remove buildup and debris from the drum and internal components.
  • Check for Leveling Issues: Make sure the washing machine is properly leveled. Use a level and adjust the feet as needed.
  • Regular Maintenance: Clean the lint filter regularly and avoid overloading the washing machine.

When Replacement Might Be Necessary

If the noise persists after troubleshooting, the drain pump itself might be faulty and need replacing. A replacement drain pump can cost between $50 and $150, depending on the model of your washing machine. Other parts that may fail include the drain pump motor and the drain hose itself. If the motor bearings are worn, replacement might be needed as well.

Safety Warning

  • Always unplug the washing machine before performing any repairs.
  • Be careful when working with water and electricity. Avoid wet floors to prevent electric shock.
  • If you are not comfortable performing the repairs yourself, contact a qualified appliance repair technician.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Adjustable wrench
  • Drain snake or plumber’s snake
  • Bucket
  • Towels
  • Level

FAQ

Here are some frequently asked questions about loud washing machine draining:

  • Q: Why is my washing machine so loud when it drains?
    A: It could be due to a foreign object in the drain pump, a clogged drain hose, or a worn drain pump motor.
  • Q: Can I fix a loud washing machine drain myself?
    A: Yes, many common issues can be resolved with simple troubleshooting steps, such as cleaning the drain hose or removing obstructions from the drain pump.
  • Q: How much does it cost to replace a drain pump?
    A: A replacement drain pump can cost between $50 and $150, depending on the model of your washing machine.
  • Q: When should I call a professional?
    A: If you are not comfortable performing the repairs yourself or if the problem persists after troubleshooting, it’s best to call a qualified appliance repair technician.

Conclusion

A loud washing machine drain can be a frustrating problem, but with a little patience and some simple troubleshooting, you can often resolve the issue yourself. Start with the easy fixes, like checking the drain hose for kinks or obstructions, and then move on to inspecting the drain pump. If the noise persists, it might be time to consider replacing the drain pump. However, remember to try the DIY fixes first before calling a technician. You might just save yourself some money and learn something new in the process!

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 6 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top