Introduction
That knocking noise coming from your washing machine during the spin cycle can be quite alarming. It’s a sign that something isn’t right, and ignoring it could lead to further damage to your appliance or even cause it to break down completely. Usually, the “washer making knocking noise when spinning” problem occurs when the machine is unbalanced, there’s an object stuck inside, or some of the internal components are wearing out. It’s essential to address this issue quickly to prevent costly repairs down the line. So, let’s get started by identifying the possible causes.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Washer Making Knocking Noise When Spinning.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Washer Making Knocking Noise When Spinning
Here are some of the most frequent culprits behind a noisy washing machine during the spin cycle:
- Unbalanced Load: Clothes clumped together on one side can throw the machine off balance.
- Overloading: Too many clothes in the washer make it difficult to spin evenly, leading to excessive shaking.
- Loose Objects: Coins, keys, or other items left in pockets can bounce around and create a racket.
- Worn Suspension Rods: These rods help stabilize the drum, and if worn, the drum can swing excessively.
- Damaged Drum Baffles: These plastic or metal pieces inside the drum can break and cause knocking if they’re loose.
- Faulty Shock Absorbers: Like suspension rods, shock absorbers dampen the drum’s movement.
- Worn Drive Pulley or Belt: These components transfer power to the drum, and if worn, they can cause a shaky spin.
- Shipping Bolts Still Installed: If you’ve recently moved your washing machine, ensure these bolts are removed.
- Uneven Flooring: If the washing machine isn’t sitting level, it can shake and vibrate during the spin cycle.
Symptoms Checklist
Use this checklist to pinpoint the exact symptoms you’re experiencing:
- Loud knocking noise specifically during the spin cycle.
- Machine shaking or vibrating excessively.
- The noise changes with different load sizes.
- Visible signs of imbalance (clothes clumped to one side).
- The machine “walks” or moves from its original position.
- You can hear rattling or clanging sounds.
How to Fix Washer Making Knocking Noise When Spinning Step-by-Step Guide
Follow these steps to troubleshoot and fix the issue:
- Stop the Washing Machine: If you hear the noise, immediately stop the machine to prevent further damage.
- Check the Load: Open the washer and redistribute the clothes to ensure they are evenly distributed.
- Remove Excess Items: Take out any unnecessary items to reduce the load size.
- Check Pockets: Before starting a wash, always check pockets for loose objects like coins or keys.
- Level the Machine: Use a level to check if the machine is level. Adjust the feet at the bottom of the washer until it is stable and even.
- Run an Empty Cycle: Run an empty cycle to see if the noise persists without any load.
- Inspect the Drum Baffles: Examine the plastic or metal pieces inside the drum for any damage or looseness.
- Locate Shipping Bolts: Make sure that all shipping bolts are removed from the back of the washer. These are used for transport and should be removed before operation.
- Check for Obstructions: Inspect the drain hose for blockages. Ensure that the water is flowing freely.
- Listen Carefully: Try to isolate the source of the noise. Is it coming from the bottom, the sides, or the back of the machine?
- Manual Check: With the machine unplugged, manually try to rotate the drum. Listen for any unusual sounds.
- Look at the floor: Is the floor underneath structurally sound? A weak floor can amplify vibrations.
- Space Around Washer: Are items next to washer causing the noise from banging? Ensure adequate spacing.
Fix the Issue Without Buying Parts
Before considering replacements, try these free solutions:
- Reset the Washer: Unplug the washer for 1-2 minutes, then plug it back in. This can sometimes reset the control panel.
- Clean the Washer: Run a cleaning cycle with vinegar or a washing machine cleaner to remove buildup and debris.
- Recalibrate the Washer: Some washing machines have a recalibration mode. Consult your owner’s manual for instructions.
- Inspect Hoses: Make sure the water supply and drain hoses aren’t kinked or loose.
- Basic Maintenance: Regularly clean the lint trap and wipe down the exterior of the machine.
When Replacement Might Be Necessary
If the knocking persists after troubleshooting, and you suspect worn suspension rods, faulty shock absorbers, or a damaged drive pulley/belt, replacement may be necessary. Parts can range from $30 to $200+ depending on the model and component. Suspension rods and shock absorbers are common culprits. Consider consulting with a technician for an accurate diagnosis before ordering any parts.
Safety Warning
- Always unplug the washing machine before performing any repairs or inspections.
- Avoid working on electrical components with wet hands.
- Be careful when lifting or moving the washing machine. It’s heavy and requires assistance.
- If you’re not comfortable with electrical or mechanical repairs, consult a qualified technician.
- Ensure the floor around the washing machine is dry to prevent slips.
Tools You May Need
- Level
- Wrench Set
- Screwdriver Set (Phillips and Flathead)
- Pliers
- Gloves
- Flashlight
FAQ
Here are some frequently asked questions:
- Q: Why is my new washing machine making a knocking noise? A: New machines may have shipping bolts that need to be removed.
- Q: Can an unbalanced load damage my washing machine? A: Yes, it can put excessive strain on the motor and suspension system.
- Q: How often should I clean my washing machine? A: At least once a month, or more frequently if you use a lot of detergent.
- Q: Is it safe to run the washing machine if it’s making a loud knocking noise? A: It’s best to stop the machine immediately to prevent further damage.
- Q: What if the floor is not level? A: Use shims under the washer’s feet to level it, or address structural issues with the floor.
Conclusion
Dealing with a “washer making knocking noise when spinning” can be frustrating, but by following these steps, you can hopefully identify and fix the problem yourself. Remember to start with the easiest solutions first and work your way up. Don’t be afraid to try these methods. If you’ve exhausted all troubleshooting steps and the noise persists, it might be time to consult a qualified appliance technician for professional assistance.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 5 section for step-by-step troubleshooting solutions.
