Samsung Wf42h5000aw A2 Not Draining

Introduction

A washing machine that won’t drain can be a real headache. Clothes are stuck in the drum, you can’t start another load, and you’re left with a puddle of water. The “samsung wf42h5000aw a2 not draining” problem is unfortunately common. It’s important to address this quickly to prevent mold growth and further damage to your washing machine or surrounding area. Follow this guide for simple troubleshooting steps before calling a repair technician.

Common Causes of samsung wf42h5000aw a2 not draining

Here are some of the most frequent reasons why your Samsung WF42H5000AW/A2 might not be draining:

• Clogged Drain Hose: The hose that carries water away from the machine can become blocked with lint, small objects, or debris.
• Clogged Drain Pump Filter: This filter is designed to catch larger items before they reach the pump, but it needs to be cleaned regularly.
• Drain Pump Malfunction: The drain pump itself might be faulty and unable to push the water out.
• Blocked Drain Pipe: The pipe where the drain hose connects in your wall could be blocked.
• Kinked or Twisted Drain Hose: A bent or twisted hose can restrict water flow.
• Air Lock in Drain Hose: Sometimes air gets trapped in the drain hose, preventing proper drainage.
• Faulty Lid Switch/Sensor: On some models, a faulty lid switch can prevent the drain cycle from starting.
• Control Board Issue: In rare cases, a problem with the washing machine’s control board can cause drainage issues.
• Over sudsing Too much soap can create suds and interfere with the draining process.

Symptoms Checklist

These symptoms can help you pinpoint the issue:

• Water remains in the washing machine drum after the cycle is complete.
• The washing machine makes a humming or buzzing noise but doesn’t drain.
• The washing machine displays an error code related to draining.
• The washing machine stops mid-cycle and won’t advance.
• The drain hose is visibly bulging or leaking.

How to Fix samsung wf42h5000aw a2 not draining Step-by-Step Guide

Follow these steps to troubleshoot your draining problem:

1. Unplug the Washing Machine: Safety first! Disconnect the power cord from the outlet.
2. Locate the Drain Hose: It’s usually at the back of the machine.
3. Inspect the Drain Hose for Kinks or Twists: Straighten out any kinks or twists. Ensure the hose isn’t crushed or damaged.
4. Check the Height of the Drain Hose: The end of the drain hose needs to be at the proper height (usually specified in your owner’s manual) to allow for proper drainage. It shouldn’t be too low or too high.
5. Detach the Drain Hose from the Drainpipe: Carefully remove the hose from the drainpipe in the wall.
6. Check for Blockages in the Drainpipe: Shine a flashlight into the drainpipe to see if you can spot any obstructions. You can try using a plumbing snake or a bent wire hanger to clear any blockages.
7. Flush the Drain Hose: Hold the drain hose over a bucket and run water through it to flush out any debris.
8. Locate the Drain Pump Filter: This is usually located at the bottom front of the washing machine, behind a small access panel. Refer to your owner’s manual for the exact location.
9. Drain the Remaining Water: Before opening the filter, place a shallow pan or towels to catch any spilled water.
10. Open and Clean the Drain Pump Filter: Carefully unscrew or unclip the filter cover (turn counter-clockwise). Remove the filter and clean it thoroughly, removing any lint, hair, coins, or other debris.
11. Reinstall the Drain Pump Filter: Make sure the filter is securely in place and the cover is tightly closed.
12. Reattach the Drain Hose to the Drainpipe: Ensure the connection is secure.
13. Plug the Washing Machine Back In: Restore power to the machine.
14. Run a Test Cycle: Select a short wash cycle or rinse/spin cycle to see if the washing machine now drains properly.
15. Check for Error Codes: If the problem persists, note any error codes displayed on the control panel. Look up the error code in your owner’s manual to identify the potential issue.

Fix the Issue Without Buying Parts

Here are some methods that might resolve the issue without requiring new parts:

• Reset the Washing Machine: Unplug the machine for 5-10 minutes, then plug it back in. This can sometimes clear minor errors.
• Reduce Soap Usage: Using too much detergent can create excessive suds, hindering drainage. Use the recommended amount only. Consider using HE (High Efficiency) detergent.
• Run a Cleaning Cycle: If your machine has a self-cleaning cycle, run it to remove buildup and residue that could be contributing to the problem.
• Inspect the Tub for Imbalances: If the load is severely unbalanced, the machine may not drain properly. Rearrange the load evenly.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washing machine still won’t drain, the drain pump itself may be faulty and need replacement. This is usually a last resort. A new drain pump can cost anywhere from $50 to $150 USD, and professional installation can add another $50 to $100 USD. Other parts that rarely fail are the water level sensor or the main control board.

Safety Warning

• Always unplug the washing machine before performing any maintenance or repairs.
• Be careful when dealing with water and electricity. Avoid standing in water while working on the machine.
• If you are not comfortable performing any of these steps, consult a qualified appliance repair technician.
• Never overload the washing machine, as this can strain the motor and pump.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Bucket or shallow pan
• Towels
• Flashlight
• Plumbing snake (optional)
• Gloves

FAQ

Here are some frequently asked questions:

• Q: Why is my washing machine making a humming noise but not draining? A: This often indicates a blockage in the drain pump or a failing drain pump motor.
• Q: How often should I clean the drain pump filter? A: It’s recommended to clean the filter every 1-3 months, or more often if you wash heavily soiled items.
• Q: What does the “UE” error code mean on my Samsung washing machine? A: “UE” usually indicates an unbalanced load. Try redistributing the clothes evenly in the drum.
• Q: Can I use a regular detergent in my HE washing machine? A: No, you should only use HE (High Efficiency) detergent in HE washing machines. Regular detergent can create too many suds and damage the machine.
• Q: What is a siphon break on the drain hose? A: A siphon break prevents dirty water from being sucked back into the machine. Some drain hoses are pre-made with this break, and it requires that the drain hose height be placed within specifications to work properly.

Conclusion

Hopefully, this guide has helped you troubleshoot the “samsung wf42h5000aw a2 not draining” issue. By following these steps, you can often resolve the problem yourself and save money on repair costs. If you’ve exhausted these solutions and the problem persists, it’s best to contact a qualified appliance repair technician for professional assistance.

Youtube Video: