Samsung Washing Machine Won T Finish Spin Cycle

Introduction

A washing machine that won’t finish its spin cycle is a common and frustrating problem. It leaves your clothes soaking wet, requiring extra drying time and potentially leading to mildew. This issue usually means your clothes are heavy, making them difficult to handle, and your washer isn’t functioning efficiently. Addressing this quickly prevents further damage to the machine and saves you time and energy.

Common Causes of Samsung Washing Machine Won’t Finish Spin Cycle

Here are some of the most frequent reasons why your Samsung washing machine might be refusing to complete the spin cycle:. For more related activities, check out our My Washing Machine Making Loud Noise Spins.

• Overloading: Too many clothes in the drum can prevent it from spinning correctly.
• Unbalanced Load: Clothes clumped on one side can cause the washer to stop.
• Drainage Issues: A clogged drain hose or filter prevents water from being pumped out, hindering the spin cycle.
• Faulty Lid Switch/Sensor: The washer won’t spin if it doesn’t detect that the lid is closed properly.
• Worn Drive Belt: The belt connecting the motor to the drum might be loose or broken.
• Clogged Drain Pump: Debris can block the pump, preventing water drainage.
• Defective Motor Coupler: This part connects the motor to the transmission; if it’s broken, the drum won’t spin.
• Control Board Malfunction: A rare but possible issue where the electronic control board isn’t sending the correct signals.
• Too much soap: Excessive suds can trigger sensors that prevent the spin cycle from starting or completing.

Symptoms Checklist

Use this checklist to pinpoint the issue:

• Clothes are soaking wet after the wash cycle.
• The washing machine stops mid-cycle and displays an error code.
• You hear unusual noises during the spin cycle.
• The drum doesn’t spin at all.
• Water remains in the drum after the cycle is complete.
• The washer shakes violently during the spin cycle.

How to Fix Samsung Washing Machine Won’t Finish Spin Cycle Step-by-Step Guide

Follow these steps to troubleshoot and fix the problem:

1. Check for Overloading: Remove some clothes to reduce the load size and restart the spin cycle.
2. Rearrange the Load: Manually redistribute clothes in the drum to create a more balanced load.
3. Inspect the Drain Hose: Make sure the drain hose isn’t kinked, blocked, or bent sharply.
4. Clean the Drain Filter: Locate the drain filter (usually at the bottom front of the machine). Unscrew the access panel and carefully remove the filter. Clean it thoroughly under running water to remove lint, hair, and debris. Replace the filter and the access panel.
5. Check the Lid Switch/Sensor: Make sure the lid is closing properly and engaging the switch. Sometimes a simple adjustment or cleaning is all it needs. (Consult your manual for location).
6. Run a Rinse and Spin Cycle: Sometimes, simply running a rinse and spin cycle can resolve minor imbalances or drainage issues.
7. Check for Error Codes: Note any error codes displayed on the washer’s control panel. Consult your user manual to identify the meaning of the code and suggested solutions.
8. Inspect the Drain Pump: Although more complicated, check the drain pump for blockages. You might need to remove the front panel of the washing machine to access it. Be sure to unplug the washer first.
9. Reduce Soap Usage: Using too much detergent can create excessive suds, interfering with the spin cycle. Reduce the amount of detergent you use, especially with high-efficiency (HE) detergents.
10. Check Washer Level: Ensure the washing machine is sitting level on the floor. Use a level and adjust the leveling feet on the bottom of the machine until it’s stable.
11. Run a Calibration Cycle: Some Samsung washers have a calibration cycle. Consult your owner’s manual for specific instructions on how to run this cycle.

Fix the Issue Without Buying Parts

Before considering replacements, try these free methods:

• Reset the Washer: Unplug the washing machine from the power outlet for 5-10 minutes. Plug it back in and try running a cycle.
• Clean the Washer: Run an empty cycle with a washing machine cleaner or a cup of white vinegar to remove buildup and residue.
• Recalibrate: Refer to your owner’s manual for specific instructions to run a calibration cycle. This can resolve sensor issues.
• Regular Maintenance: Clean the dispenser drawers regularly and leave the washer door slightly ajar after use to prevent mildew buildup.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washer still isn’t spinning, it may be time to consider replacement of these components or the entire machine:

• Drive Belt: A broken or severely worn drive belt can prevent the drum from spinning. Estimated cost: $20-$50.
• Drain Pump: If the drain pump is faulty, it won’t drain the water properly. Estimated cost: $50-$150.
• Motor Coupler: If this coupler is broken, it won’t transfer power from the motor. Estimated cost: $15-$40.
• If the control board is malfunctioning, replacement can be costly. Consult a technician for an estimate. Replacement washers can cost between $400 to $1200.

Safety Warning

Follow these safety precautions:

• Always unplug the washing machine before performing any maintenance or repairs.
• Avoid working on electrical components if you’re not comfortable with electrical work. Call a qualified technician.
• Be careful when handling water and avoid getting water on electrical parts.
• Be mindful of pinch points and moving parts.

Tools You May Need

Here’s a list of tools that might be helpful:

• Screwdrivers (Phillips and flathead)
• Pliers
• Adjustable wrench
• Multimeter (for testing electrical components optional)
• Level
• Gloves
• Towels

FAQ

Here are some frequently asked questions:

• Q: Why is my Samsung washer displaying an “UE” error code? A: “UE” indicates an unbalanced load. Redistribute the clothes in the drum and try again.
• Q: How do I clean the drain filter on my Samsung washer? A: Locate the access panel at the bottom front of the machine, unscrew it, and remove the filter. Clean it thoroughly under running water and replace it.
• Q: What if the drain hose is frozen? A: Try thawing the hose with warm (not hot) water. Insulate the hose to prevent freezing in the future.
• Q: My washer vibrates excessively during the spin cycle. What could be wrong? A: Check if the washer is level. Adjust the leveling feet as needed. An unbalanced load can also cause excessive vibration.
• Q: How often should I clean my washing machine? A: Clean your washing machine at least once a month to prevent buildup and odors.
• Q: Should I call a professional technician? A: If you’ve tried all the troubleshooting steps and the issue persists, it’s best to call a qualified appliance repair technician.

Conclusion

Don’t let a washer stuck on the spin cycle ruin your day! By following these steps, you can diagnose and resolve many common issues without the need for expensive repairs. Take your time, follow the instructions carefully, and you’ll likely have your laundry back on track in no time. If you’re unsure about any step or if the problem persists, don’t hesitate to call a qualified technician. Good luck!

Youtube Video: