Samsung Washing Machine Drain Not Working


Samsung Washing Machine Drain Not Working

Introduction

Discovering that your Samsung washing machine isn’t draining can be frustrating. Nobody wants to deal with a tub full of dirty water! This issue, where your Samsung washing machine drain not working, usually happens after a wash cycle finishes and the water simply stays put. It’s important to fix this quickly to prevent unpleasant odors, mold growth, and potential damage to your laundry room. Don’t worry; this guide will help you troubleshoot the problem step-by-step.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Samsung Washing Machine Drain Not Working.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Samsung Washing Machine Drain Not Working

Here are some common reasons why your Samsung washing machine might not be draining properly:

  • Clogged Drain Hose: A blockage in the hose that carries water away from the machine.
  • Clogged Drain Pump Filter: This filter traps lint and debris, and it can get clogged over time.
  • Blocked Drain Pipe: The pipe where your drain hose connects to could be blocked.
  • Kinked or Twisted Drain Hose: A bent hose can restrict water flow.
  • Faulty Drain Pump: The pump that actively pushes the water out might be broken.
  • Air Lock in Drain Hose: Air trapped in the hose can prevent proper draining.
  • Control Board Issues: In rare cases, the machine’s electronic control board might be malfunctioning.
  • Over sudsing: Too much soap can create suds that prevent the drain pump from working properly.

Symptoms Checklist

Here are some signs that your Samsung washing machine is experiencing a drain problem:

  • Standing water in the washing machine tub after a cycle.
  • The washing machine makes unusual noises during the drain cycle (or the cycle doesn’t start).
  • The washing machine displays an error code related to draining (check your user manual).
  • Clothes are soaking wet even after the spin cycle.
  • Water drains very slowly.

How to Fix Samsung Washing Machine Drain Not Working Step-by-Step Guide

Follow these steps to troubleshoot and fix your washing machine:

  1. Unplug the Washing Machine: For safety, disconnect the washing machine from the power outlet before starting any repairs.
  2. Locate the Drain Hose: This hose is usually at the back of the machine.
  3. Inspect the Drain Hose for Kinks or Twists: Straighten out any kinks or twists in the hose. Make sure the hose is not crushed or damaged.
  4. Detach the Drain Hose: Carefully disconnect the hose from the drain pipe. Have a bucket ready to catch any water that may spill.
  5. Check for Clogs in the Drain Hose: Look inside the hose for any obstructions like lint, small objects, or debris. Flush the hose with water to clear any blockages. You can use a long flexible object, like a straightened coat hanger (carefully!), to dislodge stubborn clogs.
  6. Check the Drain Pipe: Make sure the drain pipe where the hose connects isn’t clogged. You can use a drain snake or a wet/dry vacuum to remove any blockages.
  7. Locate the Drain Pump Filter: This filter is usually located at the front of the machine, behind a small access panel at the bottom. Refer to your owner’s manual for the exact location.
  8. Drain Any Remaining Water: Before opening the filter, place a shallow pan or towel underneath to catch any remaining water.
  9. Open and Clean the Drain Pump Filter: Carefully unscrew the filter (it might be tight). Remove any lint, hair, or debris from the filter. Rinse the filter thoroughly under running water.
  10. Reinstall the Drain Pump Filter: Securely screw the filter back into place. Make sure it’s tight to prevent leaks.
  11. Reattach the Drain Hose: Reconnect the drain hose to the drain pipe. Ensure the connection is secure.
  12. Check the Washer Level: An unlevel washer can cause draining issues. Use a level to verify that the machine is level, and adjust the legs accordingly.
  13. Run a Test Cycle: Plug the washing machine back in and run a short wash cycle to see if it drains properly.
  14. Reduce Detergent: Try using less detergent to avoid oversudsing, which can impair the drain pump’s function.

Fix the Issue Without Buying Parts

Often, you can resolve a drain problem without needing new parts:

  • Reset the Machine: Unplug the machine for a few minutes, then plug it back in. This can sometimes reset the control board and resolve minor glitches.
  • Clean the Tub: Run an empty wash cycle with a washing machine cleaner to remove soap buildup that can contribute to clogs.
  • Inspect the Tub Seal: Check for signs of damage or wear on the tub seal. If damaged, a technician might be needed.
  • Avoid Overloading: Do not overload the washing machine. Overloading can strain the drain pump and lead to draining problems.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the machine still won’t drain, you might need to replace a part. The most common part to fail is the drain pump. A new drain pump typically costs between $50 and $150 USD. If the control board is faulty, that replacement can range from $150 to $300 USD. Consider contacting a qualified appliance repair technician for an accurate diagnosis and repair if you’re not comfortable with replacing parts yourself.

Safety Warning

  • Always unplug the washing machine before performing any maintenance or repairs.
  • Be careful when dealing with water to avoid electric shock.
  • Wear gloves when handling drain hoses and filters.
  • Clean up any spills immediately to prevent slipping hazards.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Bucket or shallow pan
  • Towels
  • Flashlight
  • Drain snake (optional)
  • Level

FAQ

Here are some frequently asked questions about washing machine drain problems:

  • Q: Why is my washing machine making a loud noise when it tries to drain?
    A: This could be due to a foreign object stuck in the drain pump. Clean the drain pump filter as described above.
  • Q: How often should I clean the drain pump filter?
    A: It’s a good idea to clean the filter every 1-3 months, depending on how frequently you use your washing machine.
  • Q: What do I do if the drain pump filter is stuck?
    A: Try gently rocking it back and forth while applying pressure to unscrew it. If it’s still stuck, you might need to use pliers to get a better grip. Be careful not to damage the filter.
  • Q: Can I use bleach to clean the drain hose?
    A: Yes, you can use a diluted bleach solution to flush the drain hose, but make sure to rinse it thoroughly afterward to remove any bleach residue.

Conclusion

Dealing with a Samsung washing machine drain not working can be a bit of a hassle, but with these steps, you can often resolve the problem yourself. Remember to take your time, follow the instructions carefully, and prioritize safety. If you’ve tried everything and your machine still won’t drain, don’t hesitate to call a qualified appliance repair technician for assistance. Good luck!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 5

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 5 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top