Introduction
A washing machine that refuses to drain can quickly become a major headache. Not only does it prevent you from doing laundry, but it can also lead to mold growth and water damage if left unattended. This situation is particularly frustrating when you’ve just finished a wash cycle, expecting clean clothes, only to find them soaking in dirty water. Addressing this issue promptly is crucial to avoid further complications and get your laundry routine back on track.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Samsung Washing Machine Does Not Drain.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Samsung Washing Machine Does Not Drain
Several factors can contribute to a Samsung washing machine’s failure to drain. Here are some of the most common culprits:. For more related activities, check out our My Washing Machine Making Loud Noise Spins.
- Clogged Drain Hose: The hose that carries water away from the machine can become blocked with lint, small objects, or debris.
- Blocked Drain Pump Filter: This filter catches lint and small items before they reach the drain pump, preventing damage. If it becomes clogged, the pump can’t function properly.
- Kinked or Twisted Drain Hose: A kink in the hose restricts water flow, preventing drainage.
- Faulty Drain Pump: The drain pump is responsible for pushing water out of the machine. If it’s broken or malfunctioning, it won’t drain the water.
- Clogged Drainpipe: The drainpipe where the washing machine hose connects could be blocked.
- Air Lock: An air bubble trapped in the drain hose can prevent water from flowing freely.
- Lid Switch Problem: Some models require the lid or door to be fully closed for the drain cycle to activate. A faulty switch might prevent draining.
- Control Panel Malfunction: Though less common, a glitch in the control panel can sometimes cause drainage issues.
Symptoms Checklist
Confirm your issue is indeed a drainage problem by checking for the following:
- Water remaining in the drum after the wash cycle.
- The washing machine making a humming or buzzing sound, but not draining.
- Error codes displayed on the washing machine’s control panel related to drainage.
- Water backing up in the drainpipe.
- Clothes remaining soaking wet after the spin cycle.
How to Fix Samsung Washing Machine Does Not Drain Step-by-Step Guide
Follow these steps to troubleshoot and fix your Samsung washing machine’s draining issue:
- Unplug the Washing Machine: For safety, always disconnect the power before starting any repairs.
- Locate the Drain Hose: Find the hose at the back of the machine that connects to the drainpipe.
- Inspect the Drain Hose: Check for any kinks, twists, or blockages. Straighten any kinks and detach the hose from the drainpipe.
- Clear the Drain Hose: Run water through the hose to flush out any debris. You can also use a long, flexible object (like a straightened coat hanger) to dislodge any clogs.
- Check the Drainpipe: Make sure the drainpipe isn’t clogged. Use a drain snake or a wet/dry vacuum to remove any obstructions.
- Locate the Drain Pump Filter: This is usually located at the bottom front of the washing machine, behind a small access panel. Consult your owner’s manual for the exact location.
- Drain Remaining Water: Before removing the filter, place a shallow pan or towels beneath the access panel to catch any spilled water. Slowly unscrew the filter cap to allow the water to drain.
- Clean the Drain Pump Filter: Remove the filter and clean it thoroughly, removing any lint, hair, or small objects.
- Inspect the Drain Pump: After removing the filter, inspect the drain pump impeller (the small fan-like blades). Make sure it’s not blocked or damaged. You can try to manually turn the impeller to check if it’s moving freely.
- Reassemble the Filter: Reinstall the cleaned filter, making sure it’s securely tightened.
- Reconnect the Drain Hose: Reattach the drain hose to the drainpipe.
- Level the Washing Machine: Ensure the washing machine is level. An uneven machine can sometimes have drainage problems. Use a level to check and adjust the feet of the machine as needed.
- Run a Test Cycle: Plug the washing machine back in and run a short wash cycle to see if it drains properly.
- Check for Error Codes: If the problem persists, check the display for any error codes. Consult your owner’s manual to understand the meaning of the code and potential solutions.
Fix the Issue Without Buying Parts
Often, drainage issues can be resolved without resorting to replacements:
- Reset the Washing Machine: Unplug the machine for a few minutes, then plug it back in. This can sometimes clear minor software glitches.
- Clean Regularly: Regularly clean the drain pump filter and the washing machine tub to prevent build-up of lint and debris.
- Inspect the Hose: Periodically check the drain hose for kinks or damage.
- Reduce Detergent Use: Using too much detergent can lead to excessive suds, which can sometimes interfere with drainage.
When Replacement Might Be Necessary
If the troubleshooting steps above don’t resolve the issue, the drain pump might be faulty and need replacement. Replacement costs typically range from $50 to $150, depending on the model. Other parts that could potentially fail are the drain hose (around $20-$40) or the lid switch (around $30-$70). Only consider replacing parts after exhausting all other options.
Safety Warning
- Always unplug the washing machine before performing any repairs.
- Be careful when handling water, as it can create a slip hazard.
- If you’re not comfortable performing repairs yourself, consult a qualified appliance technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Shallow pan or towels
- Drain snake
- Wet/dry vacuum
- Level
FAQ
Here are some common questions about washing machine drainage issues:
- Q: Why is my washing machine making a humming noise but not draining? A: This usually indicates a blockage in the drain pump or a faulty drain pump motor.
- Q: How often should I clean the drain pump filter? A: It’s recommended to clean the filter every 1-3 months, depending on usage.
- Q: Can I use vinegar to clean my washing machine’s drain? A: Yes, running a cycle with vinegar can help to dissolve mineral buildup and improve drainage.
- Q: What does an error code related to draining mean? A: Error codes vary depending on the model, but they generally indicate a problem with the drain pump, water level sensor, or a blockage in the drain system. Consult your owner’s manual for the specific meaning of the code.
Conclusion
Troubleshooting a washing machine that won’t drain can seem daunting, but with a systematic approach, you can often resolve the issue yourself. Before calling a technician, try the steps outlined in this guide. You might be surprised at how easily you can get your washing machine working again and save yourself the cost of a service call.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 5 section for step-by-step troubleshooting solutions.
