Samsung Washer Won T Drain Water


Samsung Washer Won T Drain Water

Introduction

Discovering that your Samsung washer won’t drain water can be frustrating. Nobody wants a load of soggy clothes sitting in a machine! This is a common issue that can stem from various causes, and it’s important to address it promptly. Leaving wet clothes in the washer for extended periods can lead to mold and mildew growth, which is not only unpleasant but also potentially harmful to your health and your clothing. This guide provides simple, step-by-step instructions to help you diagnose and fix the problem yourself, potentially saving you a costly service call.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Samsung Washer Won T Drain Water.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Samsung Washer Won’t Drain Water

Here are some common reasons why your Samsung washer might be refusing to drain:

  • Clogged Drain Hose: The drain hose carries water from the washer to the drainpipe. If it’s blocked, water can’t escape.
  • Blocked Drainpipe: Similar to a clogged hose, a blockage in the drainpipe where the hose connects can prevent drainage.
  • Coin or Debris in the Drain Pump: Small objects like coins, buttons, or lint can get past the filter and clog the drain pump.
  • Faulty Drain Pump: The drain pump is responsible for pushing water out of the washer. If it fails, it won’t be able to do its job.
  • Clogged Filter: Many Samsung washers have a filter designed to catch lint and debris. If it’s full, it can restrict water flow.
  • Kinked or Twisted Drain Hose: A kink or twist in the hose can restrict water flow just as effectively as a clog.
  • Lid Switch Malfunction: Some washers have a lid switch that prevents the machine from spinning and draining if the lid isn’t closed properly.
  • Control Board Issues: In rare cases, a problem with the washer’s control board can cause draining problems.
  • Too Much Soap: Using excessive soap can create suds that interfere with the draining process.

Symptoms Checklist

Check these indicators to accurately identify the issue:

  • Water remains in the washer drum after a cycle.
  • The washer makes a humming or buzzing noise but doesn’t drain.
  • The washer displays an error code related to draining (e.g., 5E, E2, nd).
  • The drain hose is visibly kinked or blocked.
  • The drain pump filter is clogged with lint and debris.
  • The washer smells musty or moldy.

How to Fix Samsung Washer Won’t Drain Water Step-by-Step Guide

Follow these steps to troubleshoot your Samsung washer:

  1. Unplug the Washer: Safety first! Disconnect the washer from the power outlet before starting any work.
  2. Check the Drain Hose: Locate the drain hose at the back of the washer. Inspect it for kinks, twists, or visible blockages. Straighten any kinks and reposition the hose to ensure smooth water flow.
  3. Inspect the Drainpipe: Disconnect the drain hose from the drainpipe. Check the drainpipe for any obstructions. You can use a flexible wire or a plumbing snake to clear any blockages.
  4. Clean the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the washer, behind a small access panel). Place a shallow pan or towel beneath the access panel to catch any spilled water. Open the panel and carefully remove the filter. Clean the filter thoroughly under running water, removing any lint, debris, or small objects.
  5. Check the Drain Pump: With the filter removed, inspect the drain pump area for any visible obstructions. You can use a flashlight to get a better look. Manually rotate the pump impeller (if accessible) to ensure it’s not jammed.
  6. Check for trapped objects in the drain hose connection: With the drain hose detached from the back of the machine, look into the machine drain connection to make sure a sock, etc, has not blocked the connection.
  7. Run a Rinse and Spin Cycle: After cleaning the filter and checking the hose, reassemble everything and run a rinse and spin cycle to test if the washer is draining properly.
  8. Check the Lid Switch: If your washer has a lid switch, make sure it’s functioning correctly. The washer won’t drain if the switch is faulty. You can test it by gently pressing the switch while the washer is running (with caution, of course). If the washer starts to drain, the switch may need to be replaced (seek professional help for this).
  9. Check for excessive suds: Try running the washer empty on a rinse cycle to see if excessive suds are preventing the water from draining. If so, reduce the amount of detergent you use in future loads.
  10. Reset the Washer: Sometimes, a simple reset can resolve the issue. Unplug the washer for 5 minutes, then plug it back in.
  11. Check Error Codes: Consult your washer’s user manual for troubleshooting steps specific to the error code displayed.

Fix the Issue Without Buying Parts

Often, you can resolve draining issues without purchasing new parts. Here are some free methods:

  • Resetting: Unplug the washer for at least 5 minutes. This can sometimes clear minor electronic glitches.
  • Cleaning: Regularly clean the drain pump filter to prevent clogs.
  • Inspection: Carefully inspect the drain hose for kinks or blockages.
  • Maintenance: Use the correct amount of detergent and avoid overloading the washer.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washer still won’t drain, the drain pump itself may be faulty and require replacement. A new drain pump typically costs between $50 and $150 (USD), plus the cost of labor if you hire a technician. Other parts that could potentially fail include the lid switch or the control board, but these are less common. If your washer is old or frequently malfunctions, it might be more cost-effective to replace the entire machine.

Safety Warning

  • Always unplug the washer from the power outlet before performing any maintenance or repairs.
  • Be careful when working with water to avoid electric shock.
  • If you’re not comfortable performing any of these steps, consult a qualified appliance repair technician.
  • Be cautious when handling tools to avoid injury.
  • Ensure the floor around the washer is dry to prevent slips.

Tools You May Need

  • Screwdriver (Phillips and flathead)
  • Pliers
  • Bucket or shallow pan
  • Towels
  • Flashlight
  • Flexible wire or plumbing snake

FAQ

Here are some frequently asked questions about Samsung washer draining problems:

  • Q: My washer is making a humming noise but not draining. What does this mean?
    A: This often indicates a problem with the drain pump, such as a blockage or a faulty motor. Check the drain pump filter and the pump itself for obstructions.
  • Q: How often should I clean the drain pump filter?
    A: It’s recommended to clean the filter every 1-3 months, depending on how frequently you use your washer and how much lint it produces.
  • Q: What if I can’t find the drain pump filter?
    A: Consult your washer’s user manual for the exact location of the filter. It’s usually at the bottom front of the machine, behind an access panel.
  • Q: What does error code 5E (or similar) mean?
    A: Error codes vary between models but usually indicate a draining issue. Check your manual for the meaning.

Conclusion

Hopefully, this guide has equipped you with the knowledge and steps necessary to troubleshoot your Samsung washer’s draining problem. By following these instructions, you can often resolve the issue yourself and avoid the expense of a service call. If you’ve exhausted all options and the problem persists, it’s time to call a qualified appliance repair technician.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 5

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 5 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top