Samsung Washer Will Not Drain Water

Introduction

Discovering that your Samsung washer is full of water after a completed cycle can be incredibly frustrating. This issue, where the washer wont drain, can lead to delays in your laundry routine and potential water damage. It’s important to address this problem quickly to prevent mold growth, unpleasant odors, and potential damage to your machine and your home. Let’s walk through some troubleshooting steps to get your washer draining properly again.

Common Causes of samsung washer will not drain water

Here are some of the most common reasons why your Samsung washer might be failing to drain:

Clogged Drain Hose: The drain hose, which carries water away from the washer, can become blocked with lint, small objects (like socks!), or soap buildup.
Clogged Drain Pump Filter: Most Samsung washers have a filter located near the bottom front that catches debris before it reaches the drain pump. This filter can become clogged.
Drain Pump Malfunction: The drain pump is responsible for pushing the water out of the washer. If it’s broken or malfunctioning, it won’t be able to do its job.
Blocked Drainpipe: The pipe where the washer’s drain hose connects can also be clogged, preventing water from flowing freely.
Kinked or Twisted Drain Hose: If the drain hose is bent or twisted, it can restrict water flow.
Air Lock in the Drain Hose: Sometimes air can get trapped in the drain hose, creating a blockage.
Lid Switch Problems: On some older models, a faulty lid switch might prevent the washer from entering the drain cycle.
Control Board Issues: In rare cases, a problem with the washer’s control board can prevent it from sending the signal to drain.

Symptoms Checklist

Use this checklist to accurately identify the issue:

Washer completes the wash cycle but doesn’t drain.
Standing water remains in the drum after the cycle ends.
The washer makes a humming or buzzing sound during the drain cycle but no water is pumped out.
Error code related to draining appears on the washer’s display panel (e.g., 5E, SE, E2).
Water drains very slowly.
The drain hose feels hot to the touch.

How to Fix samsung washer will not drain water Step-by-Step Guide

Unplug the Washer: For safety, disconnect the washer from the power outlet before beginning any troubleshooting steps.
Locate the Drain Hose: This is the hose that carries water from the washer to your drainpipe or utility sink. It’s usually located at the back of the machine.
Inspect the Drain Hose: Check for any kinks, twists, or blockages in the hose. Straighten out any kinks and make sure the hose is not crushed.
Detach the Drain Hose: Disconnect the drain hose from the drainpipe or utility sink. Have a bucket ready to catch any water that might spill out.
Flush the Drain Hose: Run water through the drain hose to flush out any debris. You can use a garden hose for this.
Check the Drainpipe: Make sure the drainpipe or utility sink drain is not clogged. You can use a drain snake or plunger to clear any blockages.
Locate the Drain Pump Filter: On most Samsung washers, the drain pump filter is located behind a small access panel at the bottom front of the machine. You may need a screwdriver to open the panel.
Remove and Clean the Drain Pump Filter: Carefully remove the filter (have a towel ready, as some water will spill). Clean any lint, hair, or debris from the filter.
Reinstall the Drain Pump Filter: Make sure the filter is properly seated and secured before closing the access panel.
Check for Air Lock: After reconnecting the drain hose to the drainpipe, lower the drain hose to the floor to let the water start draining by gravity. Once it is flowing properly, secure the drain hose back to its position.
Run a Test Cycle: Plug the washer back in and run a short drain/spin cycle to see if the problem is resolved.
Check for Error Codes: If the washer displays an error code, consult your owner’s manual for troubleshooting steps specific to that code.
Restart the Washer: Try turning off and on to see if any error has occured and resolve if needed.

Fix the Issue Without Buying Parts

Before considering replacing any parts, try these free methods:

Reset the Washer: Unplug the washer for 5 minutes, then plug it back in and run a cycle. This can sometimes clear error codes and reset the system.
Run a Cleaning Cycle: Many Samsung washers have a self-cleaning cycle that can help remove buildup and debris. Consult your owner’s manual for instructions.
Inspect the Pressure Switch Hose: This hose is connected to the pressure switch and tells the machine the water level. Sometimes, it gets clogged with soap residue.
Regular Maintenance: Run a washer cleaner product through your machine every month to prevent buildup and keep it running smoothly.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washer still won’t drain, the drain pump may need to be replaced. A new drain pump typically costs between $50 and $150 USD, depending on the model. Other parts that might fail include the drain hose and the control board, but these are less common. Consider contacting a qualified appliance repair technician for diagnosis and repair if you’re uncomfortable with electrical work or disassembling your appliance.

Safety Warning

Always unplug the washer before attempting any repairs.
Be careful when dealing with water to avoid electric shock.
Wear gloves to protect your hands from sharp edges or debris.
If you’re not comfortable with electrical work, consult a qualified appliance repair technician.

Tools You May Need

Screwdrivers (Phillips and flathead)
Pliers
Bucket
Towels
Drain snake or plunger
Gloves

FAQ

Here are some frequently asked questions about Samsung washer draining issues:

Q: Why is my Samsung washer making a humming noise but not draining?
A: This usually indicates that the drain pump is blocked or malfunctioning. Check the drain pump filter for clogs.
Q: What does the “5E” or “SE” error code mean on my Samsung washer?
A: These error codes typically indicate a draining problem. Follow the troubleshooting steps in this guide.
Q: How often should I clean the drain pump filter?
A: It’s recommended to clean the drain pump filter every 1-3 months, depending on how often you use your washer.
Q: Can I use vinegar to clean my washing machine?
A: Yes, vinegar can be used to clean your washing machine and remove buildup. Run an empty cycle with 1 cup of white vinegar.

Conclusion

Troubleshooting a Samsung washer that won’t drain can seem daunting, but by following these steps, you can often resolve the issue yourself. Remember to prioritize safety and take your time. If you’re still experiencing problems after trying these solutions, it might be time to call a qualified appliance repair technician. Don’t give upyou’ve got this!