Samsung Front Load Washer Won T Stop Spinning

Introduction

Discovering your Samsung front load washer relentlessly spinning, long after it should have stopped, is a frustrating and concerning issue. It wastes energy, keeps your clothes trapped, and can potentially damage both the washer and your laundry. This problem often happens after a wash cycle completes, or even mid-cycle. Addressing this promptly is important to prevent further wear and tear on your appliance and to get your laundry routine back on track. Let’s walk through how to diagnose and resolve this spinning dilemma!

Common Causes of samsung front load washer won t stop spinning

Here are several reasons why your Samsung front load washer might be stuck in a spin cycle:

Faulty Pressure Switch: This switch tells the washer when the water level is correct. If it’s malfunctioning, it might not register that the water has drained, causing the washer to keep spinning.
Drainage Issues: A clogged drain hose or drain pump can prevent the water from fully emptying, leading to continuous spinning.
Motor Control Board Malfunction: The motor control board is the “brain” of the washer, controlling the motor’s functions. A faulty board can cause the motor to spin continuously.
Tachometer Problem: The tachometer monitors the motor’s speed. If it’s not working correctly, the washer might not know when to stop spinning.
Door Lock Switch Failure: While less common with continuous spinning, a faulty door lock switch can sometimes confuse the washer’s control system.
Unbalanced Load: While the washer usually tries to correct for this, a severely unbalanced load can sometimes trigger a runaway spin cycle.
Software Glitch: Like any electronic device, your washer can experience software glitches that can cause unexpected behavior.
Blocked Drain Filter: Debris trapped in the drain filter can hinder drainage, signaling the washer to spin longer.

Symptoms Checklist

Use this checklist to confirm the problem:

The washer continues spinning even after the wash cycle is complete.
The washer displays an error code related to draining or motor control.
The washer is empty of water but continues spinning.
You hear a loud or unusual noise during the extended spinning.
The washer doesn’t respond to the “Pause” or “Stop” button.

How to Fix samsung front load washer won t stop spinning Step-by-Step Guide

Follow these steps to troubleshoot and fix the issue:

Unplug the Washer: For safety, disconnect the washer from the power outlet before starting any troubleshooting.
Check the Drain Hose: Inspect the drain hose for any kinks or blockages. Straighten any kinks and remove any visible obstructions.
Clean the Drain Filter: Locate the drain filter (usually at the bottom front of the washer behind a small access panel). Open the panel, carefully drain any remaining water (have a pan ready!), and remove the filter. Clean it thoroughly under running water to remove any lint, hair, or debris. Reinstall the filter and close the access panel.
Check the Drain Pump: After removing the drain filter, you may be able to access the drain pump impeller (the fan-like part). Check for any obstructions that might be preventing the pump from working correctly. Be careful not to damage the impeller.
Inspect the Pressure Switch Hose: The pressure switch is usually located at the top of the washer, and it’s connected to the tub by a small hose. Make sure the hose is securely attached and free of kinks or obstructions. Sometimes the hose can become clogged with soap residue.
Run a Calibration Cycle: Refer to your washer’s user manual for instructions on how to run a calibration cycle. This can sometimes reset the control system and resolve glitches.
Check for Error Codes: If your washer displays an error code, look it up in your user manual. The error code can provide valuable clues about the cause of the problem.
Perform a Hard Reset: With the washer unplugged, press and hold the power button for 30 seconds. This can sometimes reset the electronic controls. Plug the washer back in and try running a cycle.
Inspect the Wiring: (If you’re comfortable) Check the wiring connections to the motor, pressure switch, and drain pump for any loose or damaged wires.
Balance the Load: Make sure the washer is level and that the load is evenly distributed inside the drum. Try removing some items if the load is too large.
Test with an Empty Cycle: Run a short wash cycle with the washer empty to see if the problem persists.

Fix the Issue Without Buying Parts

Many times, you can fix the “Samsung front load washer won’t stop spinning” issue without immediately purchasing replacement parts. First, always attempt the reset and cleaning steps mentioned above. Ensure the drain hose isn’t kinked, and thoroughly clean the drain filter. A recalibration cycle, if your model supports it, can also resolve software glitches. Also double-check that the washing machine is perfectly level; adjust the feet if necessary. These simple actions can often restore the washer to proper function.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washer still won’t stop spinning, a faulty motor control board, tachometer, or pressure switch might be the culprit. Replacing these parts can be costly. A motor control board can range from $150 to $300, while a tachometer is typically around $50 to $100, and a pressure switch around $30 to $70 (USD). Before replacing anything, consider getting a professional diagnosis. It may be more cost-effective to replace the entire washer if multiple components are failing, particularly if the machine is old.

Safety Warning

Always unplug the washer from the power outlet before performing any troubleshooting or repairs.
Be careful when handling water and electrical components. Avoid working on the washer with wet hands or while standing on a wet floor.
If you’re not comfortable performing any of these steps, contact a qualified appliance repair technician.

Tools You May Need

Here’s a list of tools that might be helpful:

Screwdrivers (Phillips and flathead)
Pliers
Adjustable wrench
Small bucket or pan
Towels
Flashlight

FAQ

Here are some frequently asked questions about this issue:

Q: How do I know if my drain pump is clogged? A: If you hear a humming noise from the bottom of the washer but no water is draining, the pump might be clogged.
Q: What does a calibration cycle do? A: A calibration cycle resets the washer’s sensors and control system, helping it to operate more accurately.
Q: How do I find the drain filter on my Samsung washer? A: The drain filter is typically located at the bottom front of the washer behind a small access panel. Refer to your user manual for the exact location.
Q: Can an unbalanced load really cause the washer to keep spinning? A: Yes, a severely unbalanced load can sometimes trigger a runaway spin cycle. Try to distribute the load evenly inside the drum.

Conclusion

A Samsung front load washer that won’t stop spinning can be a headache, but with a systematic approach, you can often resolve the issue yourself. Start with the easy fixes like checking the drain hose and cleaning the drain filter. If the problem persists, consider more advanced troubleshooting steps like inspecting the pressure switch and running a calibration cycle. Don’t be discouraged if the initial steps don’t work immediately. By diligently following these steps, you can often avoid costly repairs and get your washer back to normal. If you’ve exhausted all options and are still facing problems, don’t hesitate to call a qualified appliance repair technician for professional assistance.