Samsung Front Load Washer Won T Finish Spin Cycle

Introduction

Discovering that your Samsung front load washer hasn’t completed the spin cycle is frustrating. Clothes remain soaking wet, delaying laundry day and potentially causing mildew. This usually happens when the washer can’t properly drain the water, or the spin mechanism encounters an issue. Addressing this quickly is important to prevent further damage to the washer and avoid lingering odors in your clothes.

Common Causes of Samsung Front Load Washer Won’t Finish Spin Cycle

Here are some common reasons why your Samsung front load washer might not be spinning:

• Overloading: Too many clothes can prevent the drum from spinning freely.
• Unbalanced Load: A load that’s bunched to one side throws off the washer’s balance.
• Drain Hose Clog: A blockage in the drain hose prevents water from exiting.
• Drain Pump Filter Clog: Debris in the filter obstructs the drain pump.
• Drain Pump Malfunction: The drain pump itself might be faulty.
• Lid Switch/Door Lock Problem: The washer might not recognize that the door is closed securely.
• Control Board Issues: A malfunctioning control board can cause various problems, including spin cycle failure.
• Belt Issues (Less Common): Though less frequent in front loaders, a worn or broken belt (if applicable) can affect the spin.
• Too Much Soap: Excess soap creates too many suds that interfere with the spin cycle.

Symptoms Checklist

Look for these signs to pinpoint the problem:

• Clothes are soaking wet after the cycle.
• The washer stops mid-cycle, displaying an error code (like dE, UE, 5E, or others).
• You hear unusual noises during the spin cycle.
• Water remains in the drum after the cycle.
• The washer vibrates excessively during the spin cycle.
• The cycle seems to run longer than usual.

How to Fix Samsung Front Load Washer Won’t Finish Spin Cycle Step-by-Step Guide

Follow these steps to troubleshoot your washer:

1. Check for Overloading: Remove some items and try running the spin cycle again. Don’t pack the drum too tightly.
2. Rebalance the Load: If the load is bunched up, redistribute the clothes evenly around the drum.
3. Check the Drain Hose: Disconnect the drain hose from the back of the washer and inspect it for kinks, clogs, or obstructions. Straighten any kinks.
4. Clean the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the washer, behind a small access panel). Place a towel or pan underneath to catch any water. Carefully unscrew the filter and clean out any lint, coins, or other debris. Reinstall the filter securely.
5. Run a Rinse and Spin Cycle: After cleaning the filter, run a rinse and spin cycle to see if the washer drains properly.
6. Check the Drain Pump: If the filter is clean and the washer still won’t drain, the drain pump might be faulty. You can often access the pump after removing the lower front panel of the washer. Visually inspect the pump for damage.
7. Inspect the Door Lock/Lid Switch: Make sure the door is closing securely. A faulty door lock can prevent the spin cycle from starting. If the door lock seems loose or broken, it might need replacement.
8. Check for Error Codes: Consult your washer’s user manual to identify the meaning of any displayed error codes. This can provide valuable clues about the problem.
9. Reduce Suds: If you suspect excessive suds, run a rinse cycle without adding any detergent. Use less detergent in future loads. HE (High Efficiency) detergent is specifically designed for front load washers and produces fewer suds.
10. Check the Venting (if applicable): Some models have a venting system; ensure it isnt blocked.
11. Test the Drain Pump (Advanced): If comfortable, test the drain pump with a multimeter to check for continuity. This requires some electrical knowledge and safety precautions.
12. Inspect the Water Inlet Valves: Check if the water inlet valves are functioning correctly. If they are faulty, they may be preventing proper water levels from being reached, affecting the spin cycle.

Fix the Issue Without Buying Parts

Often, you can resolve the problem without buying new parts:

• Reset the Washer: Unplug the washer for 5-10 minutes and then plug it back in. This can sometimes clear temporary errors.
• Cleaning the Washer: Regularly run a washer cleaning cycle with a washing machine cleaner to prevent buildup and clogs.
• Recalibration (if available): Some Samsung models have a recalibration feature. Consult your user manual for instructions.
• Inspection Tips: Regularly check the drain hose and filter for any signs of blockage.
• Maintenance Basics: Wipe down the door seal after each use to prevent mold and mildew growth. Leave the washer door slightly ajar to allow the interior to air out.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washer still won’t spin, a faulty drain pump ($50-$150), a malfunctioning control board ($100-$300), or a broken door lock ($30-$70) might require replacement. Consult a qualified appliance repair technician for diagnosis and repair.

Safety Warning

• Always unplug the washer from the power outlet before performing any maintenance or repairs.
• Be careful when handling water to avoid slips and falls.
• If you are not comfortable working with electricity, consult a qualified appliance repair technician.
• Wear gloves when cleaning the drain pump filter.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Towel or pan
• Gloves
• Multimeter (optional, for advanced testing)

FAQ

• Q: Why is my Samsung washer leaving clothes wet even after the spin cycle? A: This is most likely due to a clogged drain hose or drain pump filter.
• Q: How do I clean the drain pump filter on my Samsung washer? A: Locate the access panel at the bottom front of the washer, place a towel underneath, and carefully unscrew the filter. Clean out any debris and reinstall it securely.
• Q: What does the “UE” error code mean on my Samsung washer? A: The “UE” error code typically indicates an unbalanced load. Redistribute the clothes in the drum and try again.
• Q: How often should I clean my washing machine? A: Run a washer cleaning cycle at least once a month to prevent buildup and odors.
• Q: Can I use regular detergent in a Samsung front load washer? A: No, you should only use HE (High Efficiency) detergent in front load washers.
• Q: My washing machine is making a loud noise during the spin cycle, what could it be? A: This could be due to a foreign object caught in the drum or a problem with the bearings.

Conclusion

Troubleshooting your Samsung front load washer’s spin cycle issue can often be accomplished with a few simple steps. By following this guide, you can potentially save yourself the cost of a service call. However, if you’re uncomfortable performing any of these steps, or if the problem persists, don’t hesitate to contact a qualified appliance repair technician for assistance.