My Samsung Washer Is Not Draining

Introduction

A washing machine that won’t drain is a common and frustrating problem. Imagine finishing a load of laundry, only to find your clothes sitting in a tub full of dirty water! This not only delays your laundry routine but can also lead to unpleasant odors and potential damage to your clothes and washing machine. Addressing a “my samsung washer is not draining” issue promptly is crucial to prevent further complications and get your washing machine back in working order. Explore more in our Washing Machine Problems 1 collection.

Common Causes of My Samsung Washer is Not Draining

Several factors can cause your Samsung washer to fail to drain properly. Here are some of the most common:. For more related activities, check out our Samsung Front Load Washer Not Spinning.

• Clogged Drain Hose: The drain hose is responsible for carrying water away from the washer. If it becomes blocked with lint, debris, or small objects, it can restrict water flow.
• Clogged Drain Pump Filter: The drain pump filter is designed to catch lint and other small objects before they reach the drain pump. Over time, this filter can become clogged, preventing the pump from functioning correctly.
• Kinked or Blocked Drain Hose: A kink in the drain hose can restrict water flow. Similarly, obstructions inside the drain hose itself can also cause drainage problems.
• Faulty Drain Pump: The drain pump is responsible for actively pumping water out of the washing machine. If the pump motor fails or becomes damaged, it may not be able to drain the water.
• Air Lock in Drain System: Air trapped in the drain system can sometimes prevent the pump from priming and effectively draining the water.
• Clogged House Drainpipe: Though less common, a blockage in your home’s drainpipe where the washer drains can also be the culprit.
• Lid Switch Issues: Some washing machines use a lid switch to prevent the machine from spinning or draining when the lid is open. A faulty lid switch can sometimes prevent the drain cycle from starting.
• Control Board Malfunction: In rare cases, a malfunctioning control board can send incorrect signals to the drain pump, preventing it from activating.

Symptoms Checklist

Here are some indicators to help you accurately identify the problem:

• Water remains in the washing machine tub after the wash cycle is complete.
• The washing machine makes a humming or buzzing noise during the drain cycle but doesn’t drain.
• The washing machine displays an error code related to draining or pump failure.
• The drain hose is visibly kinked or blocked.
• Water drains very slowly or not at all.

How to Fix My Samsung Washer is Not Draining Step-by-Step Guide

Follow these steps to troubleshoot and fix the drainage problem:

1. Unplug the Washing Machine: Before you begin any troubleshooting, disconnect the washing machine from the power outlet for safety.
2. Check the Drain Hose for Kinks: Inspect the drain hose for any kinks or bends that might be restricting water flow. Straighten the hose if necessary.
3. Inspect the Drain Hose Connection: Ensure the drain hose is securely connected to both the washing machine and the drainpipe.
4. Remove and Inspect the Drain Hose: Disconnect the drain hose from both ends. Check for any visible blockages or debris inside the hose. Flush the hose with water to remove any obstructions.
5. Locate the Drain Pump Filter: The drain pump filter is usually located at the front, bottom of the washing machine, behind a small access panel. Refer to your owner’s manual for the exact location.
6. Clean the Drain Pump Filter: Place a shallow container or towel under the access panel to catch any water that may spill out. Carefully remove the filter and clean it thoroughly, removing any lint, debris, or small objects.
7. Inspect the Drain Pump: With the filter removed, check the drain pump impeller (the fan-like blades inside the pump housing) for any obstructions. Manually rotate the impeller to ensure it spins freely.
8. Check the House Drainpipe: Ensure the drainpipe where the washing machine drains is not clogged. You can try using a drain snake or plunger to clear any obstructions.
9. Reconnect the Drain Hose and Filter: Reinstall the drain pump filter and reconnect the drain hose securely to both the washing machine and the drainpipe.
10. Check the Lid Switch: Make sure the lid switch is functioning correctly. If it’s visibly damaged or broken, it might need professional attention.
11. Run a Test Cycle: Plug the washing machine back into the power outlet and run a short wash and drain cycle to see if the problem is resolved.
12. Check for Error Codes: If the washing machine displays an error code, consult your owner’s manual for troubleshooting steps specific to that code.
13. Look for Air Lock: Run the washer on a short cycle. Once it’s filled slightly, disconnect the drain hose from the standpipe to release air. Then reconnect and try again.

Fix the Issue Without Buying Parts

Before considering replacement parts, try these free methods:

• Reset the Washing Machine: Unplug the washing machine for a few minutes and then plug it back in. This can sometimes reset the control board and resolve minor issues.
• Recalibrate the Washing Machine: Some Samsung washing machines have a calibration mode. Refer to your owner’s manual for instructions on how to recalibrate your specific model.
• Regular Cleaning: Regularly clean the washing machine tub and dispenser to prevent build-up that can contribute to drainage problems.
• Preventative Maintenance: Regularly check and clean the drain pump filter to prevent clogs.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washing machine still won’t drain, the drain pump itself might be faulty and need replacement. Replacing the drain pump typically costs between $100 and $300, including parts and labor. Other parts that could potentially fail include the lid switch or the control board. While diagnosing these issues and replacing these parts can be done by a DIYer, it is better to call a technician. Discover more free resources across our collection library.

Safety Warning

• Always unplug the washing machine from the power outlet before performing any maintenance or repairs.
• Be careful when handling water near electrical components. Avoid getting water on the floor to prevent slips and falls.
• If you’re uncomfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Shallow container or towel
• Drain snake (optional)
• Gloves

FAQ

Here are some frequently asked questions:

• Q: Why is my Samsung washer making a humming noise but not draining? A: This usually indicates a clogged drain pump or a faulty drain pump motor.
• Q: How often should I clean the drain pump filter? A: It’s recommended to clean the drain pump filter every 1-3 months, depending on usage.
• Q: Can I use a chemical drain cleaner in my washing machine? A: No, it’s generally not recommended to use chemical drain cleaners in washing machines as they can damage the internal components.
• Q: My Samsung washer is displaying an error code. What should I do? A: Consult your owner’s manual for troubleshooting steps specific to the error code.

Conclusion

Troubleshooting a “my samsung washer is not draining” issue can seem daunting, but by following these steps, you can often diagnose and resolve the problem yourself. Remember to prioritize safety and consult your owner’s manual for specific instructions. If you’ve exhausted all troubleshooting options and the issue persists, it’s best to contact a qualified appliance repair technician for professional assistance. Good luck!

Youtube Video: