Maytag Commercial Technology Washer Not Draining

Introduction

Discovering your Maytag Commercial Technology washer isn’t draining after a wash cycle can be frustrating. Not only does it leave your clothes sitting in water, but it also prevents you from starting another load. This issue can stem from several common causes, many of which you can troubleshoot yourself before calling a professional. Addressing this problem quickly is important to prevent potential mold growth and further damage to your washing machine.

Common Causes of maytag commercial technology washer not draining

Here are some reasons why your Maytag washer might not be draining:

• Clogged Drain Hose: The hose that carries water away from the washer can become blocked with lint, debris, or small objects.
• Blocked Drain Pump Filter: Most Maytag washers have a filter designed to catch larger items before they reach the drain pump. This filter can become clogged.
• Obstructed Drain Pump: The drain pump itself might be blocked by small objects like coins, buttons, or even socks.
• Kinked or Twisted Drain Hose: A kink or twist in the drain hose can restrict water flow.
• Faulty Drain Pump: The drain pump might be malfunctioning electrically or mechanically.
• Air Lock in Drain Hose: An air pocket can sometimes form in the drain hose, preventing proper siphoning.
• Defective Lid Switch: In some cases, a faulty lid switch can prevent the washer from entering the drain cycle.
• Control Board Issues: A rare but possible cause is a problem with the washer’s control board, which manages the draining process.

Symptoms Checklist

Here are some indicators that you might have a drainage problem:

• Standing water remains in the washer drum after a wash cycle.
• The washer makes unusual noises during the drain cycle (grinding, humming).
• The drain cycle seems to take an unusually long time.
• Error codes related to draining appear on the washer’s display panel.
• Water backs up into the drainpipe.

How to Fix maytag commercial technology washer not draining Step-by-Step Guide

1. Unplug the Washer: Always disconnect the power before attempting any repairs. This is crucial for your safety.
2. Inspect the Drain Hose: Check the drain hose for any kinks, twists, or visible blockages. Straighten out any kinks and ensure the hose is properly connected to both the washer and the drainpipe.
3. Check the Drainpipe: Make sure the drainpipe where the washer drains into isn’t clogged. You can try running water down the drainpipe to see if it drains freely.
4. Locate the Drain Pump Filter: Refer to your washer’s user manual to find the location of the drain pump filter. It’s usually located at the front, bottom of the machine behind a small access panel.
5. Clean the Drain Pump Filter: Carefully remove the filter (have a towel handy as some water will spill out). Clean the filter thoroughly, removing any lint, debris, or small objects.
6. Inspect the Drain Pump: With the filter removed, you might be able to see the drain pump impeller (the fan-like part that spins to pump water). Check for any obstructions blocking the impeller. You might be able to carefully reach in and remove small items with pliers.
7. Reassemble the Filter: Once the filter and pump area are clean, reassemble the filter securely.
8. Check for Air Lock: Disconnect the drain hose from the drainpipe. Hold the end of the hose low to the ground and allow any trapped water to drain out. This can release any airlocks.
9. Run a Test Cycle: Plug the washer back in and run a short spin cycle to see if the washer now drains properly.
10. Check the Lid Switch: The lid switch ensures the washer only operates when the lid is closed. Inspect the switch for any damage. (Consult your washer’s manual for lid switch location.)
11. Try a Reset: Unplug the washer for 1-2 minutes. Plug it back in and try a drain/spin cycle. This can sometimes reset the control board.
12. Consult Your Manual: Refer to your Maytag Commercial Technology washers manual for any specific troubleshooting steps or error codes.

Fix the Issue Without Buying Parts

Many drainage problems can be resolved without purchasing new parts. Here are some free methods to try:

• Reset: Unplugging the washer for a few minutes can sometimes reset the control board and resolve minor glitches.
• Cleaning: Regularly cleaning the drain pump filter and ensuring the drain hose is free of kinks and obstructions is essential maintenance.
• Inspection: Periodically inspect the drain hose and drainpipe for any signs of damage or blockages.
• Maintenance: Use a washing machine cleaner regularly to prevent the buildup of lint and detergent residue.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps above and your washer still isn’t draining, you might need to consider replacing a part. The most common part to fail is the drain pump. A new drain pump typically costs between $50 and $150, depending on the model. While less common, a faulty lid switch or control board might also require replacement, which can be more expensive.

Safety Warning

• Always unplug the washing machine before attempting any repairs.
• Avoid standing in water while working on the appliance to prevent electric shock.
• Be careful when handling sharp tools or small parts.
• If you are not comfortable performing any of these repairs, contact a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Towels
• Bucket
• Gloves

FAQ

1. Q: My washer is making a humming noise but not draining. What could this be?
   A: This often indicates that the drain pump is blocked or failing. Check the drain pump filter and impeller for obstructions.
2. Q: How often should I clean the drain pump filter?
   A: It’s recommended to clean the drain pump filter every 1-3 months, depending on how frequently you use your washer.
3. Q: My washer displays an error code related to draining. What should I do?
   A: Consult your washer’s user manual to identify the specific error code and follow the recommended troubleshooting steps.
4. Q: The drain hose seems clear, but water is still not draining. What else could it be?
   A: Check the drainpipe for clogs and consider the possibility of a faulty drain pump or lid switch.

Conclusion

Troubleshooting a Maytag Commercial Technology washer that isn’t draining can seem daunting, but many common causes are easily fixable at home. By following these steps, you can often resolve the issue yourself and avoid the expense of a professional repair. However, if you’re uncomfortable with any of these procedures, or if the problem persists, don’t hesitate to call a qualified appliance repair technician.