Lg Washing Machine Empty Water

Introduction

Finding an unexpected puddle near your washing machine or discovering your clothes aren’t soaking properly due to the machine constantly emptying water is a frustrating experience. This issue, where your LG washing machine keeps emptying water, can stem from various causes, ranging from simple clogs to more complex component malfunctions. Addressing this promptly is crucial to prevent water damage, ensure your laundry gets cleaned effectively, and avoid potential increases in your water bill. Let’s dive into understanding why your machine is doing this and how you can fix it.

Common Causes of LG Washing Machine Empty Water

Here are several potential reasons why your LG washing machine might be emptying water prematurely:

• Drain Hose Issues: A kinked, clogged, or incorrectly positioned drain hose can trick the machine into thinking it needs to drain.
• Siphon Effect: If the drain hose is inserted too far into the drainpipe, it can create a siphon, continuously draining water.
• Faulty Drain Valve: The drain valve might be stuck open or malfunctioning, allowing water to escape even when it shouldn’t.
• Pressure Switch Problems: A malfunctioning pressure switch could inaccurately sense the water level, causing premature draining.
• Control Board Malfunction: A faulty control board might send incorrect signals, triggering the drain pump unnecessarily.
• Clogged Drain Pump Filter: A blocked filter can cause the pump to run constantly, attempting to clear the obstruction.
• Loose Connections: A loose hose connection inside the machine can cause water to leak and trigger the drain cycle.
• Over-Sudsing: Using too much detergent can create excessive suds, which can sometimes trigger the machine to drain.

Symptoms Checklist

Look for these signs to confirm the ’empty water’ issue:

• Water draining out even when the machine is supposed to be filling or soaking.
• The washing machine continuously running the drain pump.
• Clothes are not fully submerged during the wash cycle.
• Error codes related to water level or draining appearing on the display.
• Water leaking from around the machine, especially near the drain hose.

How to Fix LG Washing Machine Empty Water Step-by-Step Guide

Follow these steps to troubleshoot and fix the problem:

1. Unplug the Washing Machine: Disconnect the power cord from the outlet before starting any repairs. This is crucial for your safety.
2. Inspect the Drain Hose: Check the drain hose for kinks, bends, or blockages. Straighten any kinks and remove any visible obstructions.
3. Check Drain Hose Height and Insertion: Ensure the drain hose is not inserted too far into the drainpipe. Aim for about 4-6 inches of insertion. The top of the drain hose should also be higher than the water level in the machine.
4. Clean the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the machine). Open the access panel, carefully drain any remaining water (have a towel ready!), and remove and clean the filter. Remove any lint, debris, or foreign objects.
5. Inspect Drain Valve Area: After cleaning the filter, visually inspect the area around the drain valve for any debris or obstructions that might be preventing it from closing properly.
6. Check for Leaks: Carefully inspect all hose connections inside the machine for leaks. Tighten any loose connections.
7. Reduce Detergent Usage: Try using less detergent, especially if you have soft water. High-efficiency (HE) detergent is recommended for these machines.
8. Run a Calibration Cycle: Some LG washing machines have a calibration cycle that can help reset the water level sensors. Consult your owner’s manual for instructions.
9. Check the Pressure Switch Hose: Locate the small hose connected to the pressure switch (usually found behind the control panel). Ensure it is securely connected and free from kinks or obstructions.
10. Reset the Washing Machine: Unplug the machine for at least 10 minutes to reset the control board. Then, plug it back in and try running a test cycle.
11. Inspect the Water Inlet Valve Screens: Remove the water inlet hoses from the back of the machine. Check the screens inside the inlet valves for any sediment or debris that could be affecting water flow. Clean the screens if necessary.

Fix the Issue Without Buying Parts

Many times, you can resolve the ’empty water’ issue without purchasing new parts:

• Resetting the machine: Unplugging for 10+ minutes is a simple fix.
• Thoroughly cleaning the drain pump filter: Debris is the most common culprit.
• Adjusting the drain hose position: Correct height and insertion depth are crucial.
• Using less detergent: Prevents over-sudsing.
• Regularly inspecting hoses: Prevents kinks and obstructions.

When Replacement Might Be Necessary

If the above steps don’t work, you might need to consider replacing a faulty part. Common parts that fail include the drain valve (estimated cost: $30-$70), the pressure switch ($25-$60), or, in rare cases, the control board (expensive, $150-$400+). Get an expert diagnostic from certified technician when this happens. For more related activities, check out our My Lg Front Load Washer Won T Turn On.

Safety Warning

• Always unplug the washing machine before performing any repairs.
• Be careful when draining water from the machine, as it may be hot.
• Avoid getting water on electrical components.
• If you are uncomfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

Here are some tools that might be helpful:

• Screwdrivers (Phillips and flathead)
• Pliers
• Adjustable wrench
• Towels
• Bucket
• Gloves

FAQ

Here are some frequently asked questions about LG washing machines emptying water:

• Q: Why is my washing machine draining when it’s supposed to be filling? A: This is often caused by a siphon effect in the drain hose or a faulty drain valve.
• Q: How do I clean the drain pump filter? A: Locate the access panel at the bottom front of the machine, drain any water, and remove and clean the filter.
• Q: What does a pressure switch do? A: The pressure switch senses the water level in the machine and signals the control board to stop filling or start draining.
• Q: Can I use regular detergent in my LG washing machine? A: No, you should only use high-efficiency (HE) detergent to prevent over-sudsing.

Conclusion

Troubleshooting a washing machine that keeps emptying water can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Remember to start with the simplest solutions, like checking the drain hose and cleaning the filter, before moving on to more complex troubleshooting. If you’ve exhausted all these steps and the problem persists, don’t hesitate to call a qualified appliance repair technician for assistance. Fixing it yourself can save time and money!

Youtube Video: