Lg Tromm Washer Wont Spin

Introduction

A washing machine that won’t spin is a major inconvenience. Wet clothes can quickly develop mildew, creating unpleasant odors and even damaging your fabrics. This problem often occurs at the end of the wash cycle, leaving you with a drum full of soaking clothes. Addressing this issue quickly is essential to prevent further complications and get your laundry routine back on track.

Common Causes of lg tromm washer wont spin

Here are some common reasons why your LG Tromm washer might not be spinning:

• Overloading: Too many clothes in the drum can prevent the motor from spinning properly.
• Unbalanced Load: Clothes bunched on one side can throw the washer off balance, stopping the spin cycle.
• Drainage Issues: If the washer can’t drain the water, it won’t spin. A clogged drain pump or hose is often the culprit.
• Lid Switch Problem: The lid switch ensures the washer only spins when the lid is closed. If it’s faulty, it won’t allow spinning.
• Drive Belt Issues: The drive belt connects the motor to the drum. If it’s worn, broken, or slipped off, the drum won’t spin.
• Motor Problems: A malfunctioning motor can prevent the drum from spinning.
• Control Board Malfunction: The control board manages all the washer’s functions. A glitch or failure can stop the spin cycle.
• Foreign Objects: Items like socks or small toys can get stuck between the drum and the outer tub, preventing rotation.

Symptoms Checklist

Use this checklist to help pinpoint the issue:

• Washer fills with water, but the drum doesn’t spin during the wash cycle.
• Washer drains water, but the drum doesn’t spin during the spin cycle.
• Washer makes unusual noises (grinding, squealing) during the spin cycle.
• Washer displays an error code on the control panel.
• Clothes are soaking wet at the end of the wash cycle.
• The drum moves freely when pushed by hand, but the motor doesn’t engage.

How to Fix lg tromm washer wont spin Step-by-Step Guide

Follow these steps to troubleshoot and potentially fix your LG Tromm washer:

1. Unplug the Washer: Disconnect the power cord from the outlet before attempting any repairs.
2. Check for Overloading: Remove some clothes if the drum is packed tightly. A good rule of thumb is to leave about a hand’s width of space at the top of the drum.
3. Rearrange the Load: Redistribute clothes evenly in the drum to balance the load.
4. Check the Drain Hose: Ensure the drain hose isn’t kinked or blocked. Straighten any kinks and remove any visible obstructions.
5. Clean the Drain Pump Filter: Locate the drain pump filter (usually at the bottom front of the washer behind a small access panel). Remove the filter and clean it thoroughly. Be prepared for some water to spill out.
6. Check the Lid Switch: Visually inspect the lid switch for damage. You can test its functionality by carefully pressing it down (while unplugged, of course). You should hear a faint click.
7. Inspect the Drive Belt: (Requires removing the back panel of the washer) Once removed, inspect the belt for wear and tear. Look for cracks, frays, or slippage. Also, ensure the belt is properly seated on the pulleys.
8. Check for Error Codes: Look for any error codes displayed on the washer’s control panel. Consult your owner’s manual to understand the meaning of the code and the recommended solution.
9. Listen for Unusual Noises: Pay attention to any unusual noises (grinding, squealing) when you try to start the spin cycle. This can indicate a problem with the motor or other components.
10. Manually Rotate the Drum: With the washer unplugged, try rotating the drum by hand. It should turn relatively smoothly. If it’s difficult to turn, there might be an obstruction.
11. Check for Obstructions: If the drum doesnt spin freely, remove the washplate or agitator and use a flashlight to inspect the space between the drum and the outer tub for any foreign objects (coins, socks, etc.).
12. Run a Cleaning Cycle: Mineral buildup can sometimes affect the washer’s performance. Run a cleaning cycle with a washing machine cleaner.
13. Reset the Washer: Unplug the washer for 1-2 minutes. This can sometimes reset the control board and resolve minor glitches. Plug it back in and try running a spin cycle.

Fix the Issue Without Buying Parts

Before considering part replacements, try these free methods:

• Resetting the Washer: As mentioned, unplugging the washer for a few minutes can sometimes clear temporary glitches.
• Cleaning the Drain Pump Filter: Regular cleaning of the drain pump filter prevents clogs and ensures proper drainage.
• Running a Calibration Cycle: Some LG Tromm washers have a calibration cycle. Consult your owner’s manual to learn how to run this cycle, which can help the washer balance loads more effectively.
• Visual Inspection: Regularly inspect hoses, belts, and other components for signs of wear and tear. Early detection can prevent bigger problems down the road.
• Maintenance Basics: Avoid overloading the washer, use the correct amount of detergent, and leave the washer door slightly ajar after use to prevent mildew growth.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your LG Tromm washer still won’t spin, a part replacement might be necessary. Some commonly failing parts include:

• Drive Belt: $15 – $30 USD
• Lid Switch: $20 – $40 USD
• Drain Pump: $50 – $100 USD
• Motor: $150 – $300 USD (replacement is best left to a professional).
• Control Board: $200-$400 USD (expensive part, best left to professional diagnostic and replacement).

Consider contacting a qualified appliance repair technician for diagnosis and repair if you’re not comfortable with electrical repairs.

Safety Warning

Observe these safety precautions:

• Always unplug the washer before attempting any repairs.
• Avoid working on the washer if the floor is wet.
• Be careful when handling electrical components.
• If you are uncomfortable with electrical repairs, contact a qualified technician.

Tools You May Need

Here are some tools that may be helpful for troubleshooting:

• Screwdrivers (Phillips and flathead)
• Pliers
• Wrench
• Flashlight
• Multimeter (for testing electrical components – optional)
• Gloves
• Bucket or container (to catch water)

FAQ

Here are some frequently asked questions:

• Q: Why is my washer making a loud buzzing noise but not spinning? A: This could indicate a problem with the motor or the motor capacitor.
• Q: How do I know if the lid switch is faulty? A: Visually inspect the switch for damage and test it for continuity with a multimeter (if you have one).
• Q: Can I replace the drive belt myself? A: Yes, replacing the drive belt is usually a relatively straightforward repair. You can find replacement belts online or at appliance parts stores.
• Q: My washer displays an “UE” error code. What does that mean? A: “UE” typically means “Unbalanced Load Error.” Try redistributing the clothes in the drum and running the spin cycle again.
• Q: How often should I clean the drain pump filter? A: It’s recommended to clean the drain pump filter every 1-3 months, depending on usage.

Conclusion

Don’t despair if your LG Tromm washer won’t spin! By following these troubleshooting steps, you may be able to identify and fix the problem yourself, saving you time and money. However, if you’re uncomfortable with any of these steps or if the problem persists, don’t hesitate to contact a qualified appliance repair technician for professional assistance.

Youtube Video: