Lg Tromm Washer Won T Turn On

Introduction

Discovering your LG Tromm washer won’t turn on can be incredibly frustrating. Your laundry piles up, and you’re left wondering what went wrong. This issue can arise from simple causes like a tripped breaker to more complex problems within the machine itself. Addressing this problem quickly is important to prevent further inconvenience and potential damage to your clothes or washer components. Don’t panic; this guide will walk you through troubleshooting steps before you consider calling a repair technician.

Common Causes of lg tromm washer won t turn on

Here are some common reasons why your LG Tromm washer might not be turning on:

• Power Outlet Problems: The outlet may not be working.
• Tripped Circuit Breaker: The breaker that powers the washer might have tripped.
• Power Cord Issues: The power cord may be damaged or not fully plugged in.
• Door Latch Problems: If the door isn’t properly closed and latched, the washer won’t start.
• Control Lock Activated: The control lock feature might be enabled, preventing operation.
• Overload: Too many clothes in the washer can prevent it from starting.
• Water Supply Problems: If the water supply is shut off or has low pressure, it may not start.
• Faulty Control Board: A damaged control board can prevent the washer from powering on.
• Thermal Fuse Blown: The thermal fuse might have blown due to overheating.

Symptoms Checklist

Use this checklist to help pinpoint the issue:

• No lights or display on the washer’s control panel.
• The washer makes no sounds when the power button is pressed.
• The door appears locked, but the washer won’t start.
• The washer was running and suddenly stopped.
• Error codes are displayed on the control panel (if applicable).

How to Fix lg tromm washer won t turn on Step-by-Step Guide

Follow these steps to troubleshoot why your LG Tromm washer isn’t turning on:

1. Check the Power Outlet: Plug a lamp or another small appliance into the outlet to confirm it’s working. If it’s not, check the circuit breaker.
2. Inspect the Circuit Breaker: Locate the circuit breaker panel and check if the breaker for the laundry room or washer has tripped. If it has, reset it.
3. Examine the Power Cord: Make sure the power cord is securely plugged into the outlet. Look for any signs of damage to the cord.
4. Check the Door Latch: Ensure the washer door is fully closed and latched. Try opening and closing it firmly.
5. Deactivate Control Lock: Refer to your washer’s manual to learn how to disable the control lock feature. It usually involves pressing and holding a specific button for a few seconds.
6. Reduce Load Size: If you suspect the washer is overloaded, remove some clothes and try starting it again.
7. Inspect Water Supply: Make sure the water supply valves connected to the washer are fully open. Check for any kinks in the water hoses.
8. Try a Hard Reset: Unplug the washer from the power outlet for 5 minutes. Then, plug it back in and try turning it on. This can sometimes reset the control board.
9. Check for Error Codes: If your washer has a display, check for error codes. Consult your owner’s manual to decipher the code and find possible solutions.
10. Look at the Drain Hose: Ensure the drain hose is not kinked or blocked, and that it is properly inserted into the drain pipe.

Fix the Issue Without Buying Parts

Here are some free methods you can try:

• Reset the Washer: As mentioned above, unplugging the washer for a few minutes is a simple reset technique.
• Cleaning the Door Seal: A dirty or obstructed door seal can prevent a proper latch. Clean the seal with a damp cloth and mild detergent.
• Calibration Cycle: Some LG Tromm washers have a calibration cycle. Refer to your manual for instructions on how to run it. This cycle helps the washer relearn its drum weight and adjust accordingly.
• Visual Inspection: Carefully inspect the water hoses and drain hose for any signs of leaks or damage.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washer still won’t turn on, a faulty control board, motor, or other internal component might be to blame. Replacing the control board typically costs between $150 and $300 USD, while motor replacements can range from $200 to $400 USD. If the repair costs are significant and the washer is quite old (8+ years), consider whether a new washer might be a more cost-effective solution.

Safety Warning

Please heed these safety precautions:

• Always unplug the washer from the power outlet before performing any troubleshooting or repairs.
• Avoid working on electrical appliances if the floor is wet.
• If you are not comfortable working with electrical components, consult a qualified appliance repair technician.

Tools You May Need

Here’s a list of basic tools that might be helpful:

• Screwdrivers (Phillips and flathead)
• Pliers
• Multimeter (for advanced electrical testing – only if you are comfortable using one)
• Flashlight

FAQ

Here are some frequently asked questions:

Q: My washer is making a clicking sound but won’t start. What could that be?

A: The clicking sound might indicate a problem with the door lock or a relay switch. Check the door latch and consider having a technician inspect the relays.

Q: The power light is on, but the washer won’t start. What should I do?

A: This could be due to the control lock being activated or a problem with the start button. Deactivate the control lock and try pressing the start button firmly.

Q: How do I know if the control board is faulty?

A: A faulty control board can cause various issues, including the washer not turning on. If you’ve ruled out other causes, a technician can test the control board to confirm if it’s the problem.

Q: Can I replace the control board myself?

A: Replacing the control board is possible, but it requires some technical knowledge. If you’re not comfortable working with electrical components, it’s best to hire a professional.

Conclusion

Troubleshooting why your lg tromm washer won t turn on can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Remember to prioritize safety and consult the washer’s manual for specific instructions. If you’ve exhausted all options and the washer still won’t start, it might be time to call a qualified appliance repair technician. Don’t give up a little troubleshooting can save you time and money!

Youtube Video: