Lg Tromm Washer Not Draining

Introduction

A washing machine that won’t drain is a major inconvenience. Imagine a load of clean, wet clothes sitting in your LG Tromm washer, unable to be transferred to the dryer! This problem usually happens when the drain pump is clogged, a hose is blocked, or there’s an issue with the washer’s control system. Addressing this quickly is crucial to prevent mold growth, unpleasant odors, and further damage to your appliance. Let’s get your washer working again!

Common Causes of lg tromm washer not draining

Here are some of the most frequent reasons why your LG Tromm washer might be failing to drain:. For more related activities, check out our Roper Washing Machine Won T Drain.

• Clogged Drain Pump Filter: This filter catches lint, debris, and small objects that can block the drain pump.
• Blocked Drain Hose: The hose that carries water away from the washer can become kinked, twisted, or clogged.
• Clogged Drainpipe: The house drainpipe where the washer empties can be blocked.
• Faulty Drain Pump: The pump itself might be broken or worn out.
• Kinked or Restricted Drain Hose: Even a slight kink can severely restrict water flow.
• Air Lock in Drain Hose: Air trapped in the hose can prevent proper drainage.
• Control Board Issues: A malfunctioning control board may not be sending the signal to activate the drain pump.
• Excessive Suds: Using too much detergent can create excessive suds, which can interfere with the draining process.

Symptoms Checklist

These indicators can help you pinpoint the draining problem:

• Washer cycle completes, but water remains in the drum.
• Washer makes a humming or buzzing noise during the drain cycle, but no water is pumped out.
• Washer displays an error code related to draining (e.g., OE, dE).
• Clothes are soaking wet after the wash cycle.
• You hear gurgling or bubbling sounds coming from the drain hose.

How to Fix lg tromm washer not draining Step-by-Step Guide

Follow these steps to troubleshoot and resolve the draining issue:

1. Unplug the Washer: Disconnect the washer from the power outlet for safety.
2. Locate the Drain Pump Filter: It’s usually located at the bottom front of the washer, behind a small access panel.
3. Drain Remaining Water: Place a shallow pan or towels in front of the access panel to catch any water that spills out.
4. Open the Drain Pump Filter Access: Carefully open the access panel (you might need a screwdriver).
5. Remove the Drain Plug/Hose: Some models have a small drain plug or hose next to the filter. Remove it and let any remaining water drain out.
6. Remove the Drain Pump Filter: Turn the filter counterclockwise and pull it out.
7. Clean the Filter: Rinse the filter under running water and remove any lint, hair, coins, or other debris.
8. Inspect the Drain Pump Cavity: Use a flashlight to check inside the pump cavity for any obstructions. Remove anything you find.
9. Reinstall the Filter: Place the clean filter back into the housing and turn it clockwise to secure it.
10. Close the Drain Plug/Hose: Re-attach the drain plug/hose (if present).
11. Close the Access Panel: Secure the access panel.
12. Check the Drain Hose: Disconnect the drain hose from the back of the washer. Inspect it for kinks, twists, or clogs.
13. Clear the Drain Hose: Flush the drain hose with water to remove any blockages. You can use a garden hose for this.
14. Check the Drainpipe: Ensure the house drainpipe is not clogged. You can use a drain snake to clear any obstructions.
15. Reconnect the Drain Hose: Reattach the drain hose to the back of the washer.
16. Plug in the Washer: Plug the washer back into the power outlet.
17. Run a Test Cycle: Run a short wash cycle to see if the washer drains properly.

Fix the Issue Without Buying Parts

Here are some things to try before considering replacement parts:

• Reset the Washer: Unplug the washer for a few minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
• Reduce Detergent Use: Use only the recommended amount of detergent to prevent excessive suds.
• Run a Cleaning Cycle: Many LG Tromm washers have a cleaning cycle that helps remove buildup and debris. Refer to your owner’s manual.
• Inspect Hoses Regularly: Periodically check the drain hose and water inlet hoses for kinks or damage.

When Replacement Might Be Necessary

If the washer still won’t drain after trying all the troubleshooting steps, the drain pump might be faulty and need replacement. Drain pumps typically cost between $50 and $150 USD, plus labor if you hire a technician. Other parts that may fail include the control board, but this is less common.

Safety Warning

• Always unplug the washer before performing any troubleshooting or repairs.
• Be careful when handling water to avoid slips and falls. Wipe up any spills immediately.
• Do not attempt to repair the washer if you are not comfortable working with electrical appliances. Call a qualified technician.

Tools You May Need

• Screwdriver (Phillips and/or flathead)
• Pliers
• Shallow pan or towels
• Flashlight
• Drain snake (for clearing drainpipe clogs)
• Garden hose (optional, for flushing drain hose)

FAQ

Here are some frequently asked questions:

• Q: Why is my washer making a humming noise but not draining? A: This usually indicates a blockage in the drain pump or a faulty pump motor. Clean the drain pump filter first.
• Q: What does the “OE” error code mean on my LG washer? A: “OE” typically indicates a draining error or obstruction.
• Q: How often should I clean the drain pump filter? A: It’s recommended to clean the filter every 1-3 months, depending on usage and the amount of lint produced by your laundry.
• Q: Can I use a liquid drain cleaner in my washing machine? A: No, it’s generally not recommended as it can damage the washer’s components. Stick to manual cleaning methods.

Conclusion

Troubleshooting a draining issue on your LG Tromm washer can seem daunting, but by following these steps, you can often resolve the problem yourself. Remember to start with the simplest solutions, like cleaning the filter and checking the hoses. If you’ve exhausted all troubleshooting options and the washer still won’t drain, it might be time to call a qualified appliance repair technician. Good luck!

Youtube Video: