Lg Side By Side Fridge Freezer Not Freezing


Lg Side By Side Fridge Freezer Not Freezing

Introduction

Is your LG side-by-side fridge freezer not freezing properly? This is a common problem that can lead to spoiled food and wasted money. A freezer that isn’t cold enough to freeze food poses a risk of bacterial growth, potentially making you sick. It’s essential to address this issue quickly to prevent food spoilage and ensure your food stays safe. Common scenarios include noticing softened ice cream, thawed frozen goods, or a generally warmer temperature inside the freezer than usual. Don’t delay let’s troubleshoot the problem!

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Lg Side By Side Fridge Freezer Not Freezing.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of LG Side-by-Side Fridge Freezer Not Freezing

Here are some of the most frequent reasons why your LG side-by-side freezer might not be freezing correctly:. For more related activities, check out our My Lg Refrigerator Is Not Making Enough Ice.

  • Door Not Sealing Properly: A damaged or dirty door seal lets warm air in, preventing proper freezing.
  • Overpacked Freezer: Too much food restricts airflow, making it harder for the freezer to maintain a low temperature.
  • Dirty Condenser Coils: Dust and debris on the coils reduce their ability to release heat.
  • Faulty Condenser Fan Motor: If the fan isn’t working, the heat from the condenser coils won’t dissipate.
  • Evaporator Fan Motor Issue: The evaporator fan circulates cold air in the freezer; if it fails, the freezer won’t cool.
  • Defrost System Problems: A malfunctioning defrost system can cause ice buildup, which insulates the evaporator coils and reduces cooling.
  • Damper Control Malfunction: The damper controls the amount of cold air that flows from the freezer to the refrigerator. If it’s stuck closed, the freezer won’t get enough cold air.
  • Temperature Control Issues: The temperature setting might be too high, or the control itself could be faulty.
  • Blocked Air Vents: Food items obstructing the vents that circulate cold air will prevent effective freezing.

Symptoms Checklist

Check for these symptoms to confirm the problem:

  • Ice cream is soft or melting.
  • Frozen food feels soft or partially thawed.
  • The freezer’s interior feels warmer than usual.
  • There’s excessive frost buildup in the freezer.
  • You hear unusual noises coming from the freezer (or no noise when you should hear the fans running).
  • The refrigerator section is colder than usual.
  • The freezer door doesn’t seal tightly when closed.

How to Fix LG Side-by-Side Fridge Freezer Not Freezing Step-by-Step Guide

Follow these steps to troubleshoot your freezer:

  1. Check the Temperature Settings: Ensure the temperature is set to the recommended level (usually around 0F or -18C).
  2. Inspect the Door Seal: Examine the door seal (gasket) for tears, cracks, or debris. Clean it with warm soapy water and a soft cloth.
  3. Test the Door Seal: Close the door on a piece of paper. If you can easily pull the paper out, the seal isn’t tight enough.
  4. Reduce Overpacking: Remove excess items from the freezer to allow for better airflow.
  5. Clean the Condenser Coils: Unplug the refrigerator. Locate the condenser coils (usually on the back or bottom). Use a vacuum cleaner with a brush attachment to remove dust and debris.
  6. Listen to the Fans: Open the freezer door and listen for the evaporator fan. If you don’t hear it running, it might be faulty.
  7. Check the Condenser Fan: Locate the condenser fan (usually near the compressor at the back of the fridge). Make sure it’s running freely and not blocked by debris.
  8. Inspect the Air Vents: Ensure the air vents inside the freezer are not blocked by food items. Rearrange items to allow for proper airflow.
  9. Manually Defrost (if applicable): If you see excessive frost buildup, manually defrost the freezer. Unplug the refrigerator and leave the door open for several hours. Place towels to catch any water.
  10. Check the Damper Control: The damper control regulates airflow between the fridge and freezer. Locate it (usually in the refrigerator section) and ensure it’s not stuck or blocked.
  11. Listen for the Compressor: The compressor is the heart of the cooling system. If you don’t hear it running, it could indicate a serious problem. It is located at the back, near the bottom.
  12. Reset the Refrigerator: Unplug the refrigerator for 5-10 minutes, then plug it back in. This can sometimes reset the system and resolve minor issues.
  13. Check the Overload Protector: Located near the compressor, the overload protector can sometimes trip. If it has, unplug the refrigerator, allow it to cool, and then plug it back in.

Fix the Issue Without Buying Parts

Here are some free methods to try before considering replacements:

  • Reset: Unplug your fridge for 5-10 minutes. This can reset the internal computer and clear minor glitches.
  • Cleaning: Thoroughly clean the door seals and condenser coils.
  • Recalibration (if possible): Some models have a calibration feature. Check your owner’s manual.
  • Inspection Tips: Regularly inspect door seals, air vents, and condenser coils for any issues.
  • Maintenance Basics: Keep the freezer organized and avoid overpacking. Defrost regularly to prevent ice buildup.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the freezer still isn’t freezing, some parts might need replacing. Common culprits include the evaporator fan motor, condenser fan motor, defrost heater, or temperature control. The cost for these parts can range from $50 to $200 each, plus labor if you hire a technician. In some cases, a failing compressor could be the problem. Compressor repair is expensive and often not worth the cost compared to buying a new refrigerator.

Safety Warning

  • Always unplug the refrigerator before performing any maintenance or repairs.
  • Avoid working on electrical components if you’re not comfortable with electrical work.
  • Be careful when handling sharp tools.
  • Make sure the floor is dry to prevent electric shock.
  • Dispose of old parts responsibly.

Tools You May Need

Here’s a list of basic tools that might be helpful:

  • Screwdrivers (Phillips and flathead)
  • Vacuum cleaner with brush attachment
  • Soft cloth or sponge
  • Warm soapy water
  • Towel
  • Multimeter (for testing electrical components – use with extreme caution)

FAQ

Here are some frequently asked questions:

  • Q: Why is my freezer cold but not freezing? A: This could be due to poor airflow, a faulty door seal, or a malfunctioning defrost system.
  • Q: How do I clean the condenser coils? A: Unplug the refrigerator and use a vacuum cleaner with a brush attachment to remove dust and debris from the coils.
  • Q: What should I do if the evaporator fan isn’t running? A: Check if the fan is blocked by ice or debris. If not, the fan motor might be faulty and need replacement.
  • Q: How can I test the door seal? A: Close the door on a piece of paper. If you can easily pull the paper out, the seal isn’t tight enough.
  • Q: What temperature should my freezer be? A: The ideal freezer temperature is around 0F or -18C.
  • Q: How long should my fridge be unplugged before plugging back in? A: Usually 5-10 minutes is enough time.

Conclusion

Troubleshooting a freezer that’s not freezing can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Remember to start with the simple solutions, such as checking the temperature settings and cleaning the condenser coils. If you’ve exhausted all the troubleshooting options and your freezer is still not freezing, it might be time to consult a qualified appliance repair technician. Don’t hesitate to try these fixes you might save yourself a service call!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 4

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 4 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top