Introduction
An LG air conditioner spitting water can be a frustrating and messy problem. It usually indicates an issue with condensation drainage. This isn’t just a nuisance; prolonged water leakage can damage your walls, floors, and even the air conditioner itself. It often happens during periods of high humidity or after extended use. Addressing this issue promptly can save you money and prevent further damage. Let’s get it fixed!
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Lg Air Conditioner Spitting Water.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of LG Air Conditioner Spitting Water
Here are some typical reasons why your LG air conditioner might be spitting water:
- Clogged Drain Line: This is the most common culprit. Dust, mold, and algae can build up and block the drain line, preventing water from escaping properly.
- Dirty Air Filter: A clogged air filter restricts airflow, causing the evaporator coil to freeze. When the ice melts, the excess water can overflow.
- Frozen Evaporator Coil: As mentioned above, restricted airflow or low refrigerant levels can cause the coil to freeze.
- Incorrect Installation Angle: If the air conditioner isn’t installed with a slight downward tilt towards the outside, water can accumulate inside.
- Damaged Drain Pan: The drain pan collects condensation. If it’s cracked or damaged, water will leak.
- High Humidity: Extremely humid conditions can overwhelm the air conditioner’s drainage system.
- Refrigerant Leak: Low refrigerant can cause the evaporator coil to freeze, leading to water overflow when it melts.
- Kinked or Blocked Drain Hose: The drain hose might be bent or something might be blocking it, preventing proper drainage.
Symptoms Checklist
Check if any of these symptoms apply to your situation:
- Water dripping or spraying from the front of the unit.
- Water leaking from the back of the unit (outside).
- Unusual noises coming from the air conditioner.
- Reduced cooling performance.
- Ice forming on the cooling fins inside the unit.
- Musty or moldy odor coming from the unit.
How to Fix LG Air Conditioner Spitting Water Step-by-Step Guide
Follow these steps to troubleshoot and fix the problem:
- Turn off the Air Conditioner: For safety, turn off and unplug the air conditioner before starting any troubleshooting.
- Inspect the Air Filter: Remove the air filter and check if it’s dirty. A dirty filter restricts airflow.
- Clean the Air Filter: Wash the air filter with mild soap and water. Let it dry completely before reinstalling.
- Check the Drain Pan (if accessible): If you can access the drain pan, inspect it for cracks or damage.
- Locate the Drain Line: The drain line is a small hose that carries water away from the air conditioner. It’s usually located on the back or bottom of the unit (exterior models).
- Check for Kinks or Blockages in the Drain Line: Make sure the drain line isn’t bent or blocked. Straighten any kinks.
- Clear the Drain Line: Use a wet/dry vacuum to suck out any clogs in the drain line. Attach the hose to the drain line opening and turn on the vacuum for a few minutes. Alternatively, you can use a stiff wire (like a coat hanger) to gently probe the drain line and dislodge any debris.
- Flush the Drain Line: Pour a cup of warm water mixed with a tablespoon of bleach down the drain line to kill any mold or algae.
- Check the Installation Angle: Use a level to ensure the air conditioner is installed with a slight downward tilt towards the outside. Adjust the mounting if necessary.
- Inspect the Evaporator Coils: If you can safely access the evaporator coils (usually behind the air filter), check for ice buildup. If you see ice, let it melt completely before proceeding. This might take several hours.
- Run the Air Conditioner on “Fan Only” Mode: After clearing the drain line and letting the ice melt (if any), run the air conditioner on “Fan Only” mode for a few hours to dry out the internal components.
- Restart the Air Conditioner on Cooling Mode: Turn the air conditioner back on to cooling mode and monitor it for leaks.
- Monitor for Recurring Issues: If the problem persists, repeat the cleaning process or consider further troubleshooting.
Fix the Issue Without Buying Parts
Often, you can resolve the water-spitting issue without buying any new parts:
- Regular Cleaning: Clean the air filter at least once a month, especially during peak usage.
- Drain Line Maintenance: Flush the drain line with a bleach solution every few months to prevent clogs.
- Check Installation Regularly: Ensure the air conditioner remains properly tilted for drainage.
- Reset the Unit: Unplug the unit for 15 minutes and plug it back in. This can sometimes reset the internal controls.
When Replacement Might Be Necessary
If the problem persists after troubleshooting, a replacement might be needed. Common failing parts include:
- Drain Pan: If the drain pan is severely cracked, it needs replacement. Expect to pay between $20 – $50 USD for the part.
- Evaporator Coil: A damaged or leaking evaporator coil often requires professional repair or replacement ($100 – $400 USD including labor).
- The Unit Itself: If the air conditioner is old and frequently malfunctioning, replacing the entire unit might be more cost-effective. New LG window air conditioners range from $150 to $600 USD depending on size and features.
Safety Warning
- Always unplug the air conditioner before performing any maintenance or repairs.
- Avoid getting water on electrical components.
- Be careful when using tools to avoid injury.
- If you are uncomfortable performing any of these steps, consult a qualified technician.
- Do not attempt to repair refrigerant leaks yourself. Refrigerant handling requires specialized equipment and training.
Tools You May Need
- Screwdriver (Phillips head)
- Wet/Dry Vacuum
- Stiff Wire (Coat Hanger)
- Level
- Mild Soap
- Warm Water
- Bleach
FAQ
- Q: Why is my AC spitting water even after cleaning the filter? A: The drain line might still be clogged, or the evaporator coil could be freezing. Check both.
- Q: How often should I clean my air conditioner’s filter? A: At least once a month, or more often if you have pets or allergies.
- Q: Can I use compressed air to clean the drain line? A: Yes, but be careful not to use too much pressure, as this could damage the line.
- Q: Is it normal for my AC to drip water outside? A: Yes, it’s normal for condensation to drip from the drain line outside. The problem is when it drips inside.
- Q: My AC freezes up constantly. What could be the problem? A: This could indicate a refrigerant leak or a problem with the blower motor. Contact a technician.
Conclusion
Don’t let a spitting air conditioner ruin your comfort! By following these troubleshooting steps, you can often fix the problem yourself and save money. Remember to prioritize safety and perform regular maintenance to prevent future issues. If you’re still having trouble, don’t hesitate to call a qualified technician for assistance.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Air Conditioner Troubleshooting 5 section for step-by-step troubleshooting solutions.
