Kenmore Washer Not Draining


Kenmore Washer Not Draining

Introduction

A washer that won’t drain is a common headache for homeowners. When your Kenmore washer is stuck full of water after a wash cycle, it can bring your laundry routine to a complete halt. Not only does it leave your clothes sitting in water (potentially causing mildew or odors), but it also prevents you from running another load. Addressing this issue promptly is key to preventing further damage and getting your laundry back on track. We’ll walk you through simple steps to diagnose and potentially fix the problem yourself.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Washer Not Draining.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of kenmore washer not draining

Several issues can cause a Kenmore washer to refuse to drain. Here are some common culprits:

  • Clogged Drain Hose: The hose that carries the water away may be blocked by lint, small objects (socks!), or debris.
  • Clogged Drain Pump Filter: Most Kenmore washers have a filter near the drain pump that catches lint and small items. When this filter becomes overloaded, it restricts water flow.
  • Drain Pump Malfunction: The drain pump itself may be faulty or burned out.
  • Obstructed Drain Pump: Small objects can get lodged in the drain pump impeller, preventing it from spinning and pumping the water.
  • Kinked or Blocked Drainpipe: The pipe where the drain hose connects to the house drain might be kinked or clogged.
  • Lid Switch Issues: Some Kenmore washers won’t drain if the lid switch is malfunctioning, as the washer thinks the lid is open.
  • Air Lock in Drain Hose: Sometimes air can get trapped in the drain hose, preventing proper drainage.
  • Control Panel/Timer Problems: In rare cases, a faulty control panel or timer might fail to activate the drain pump.

Symptoms Checklist

Here are some indicators that your Kenmore washer isn’t draining properly:

  • Washer tub is full of water after the wash cycle.
  • You hear a humming or buzzing sound during the drain cycle, but no water is being pumped out.
  • The drain cycle is unusually slow.
  • Error codes related to draining appear on the washer’s display (if equipped).
  • Clothes are soaking wet after the cycle is complete.

How to Fix kenmore washer not draining Step-by-Step Guide

Follow these steps to troubleshoot your Kenmore washer:

  1. Unplug the Washer: Safety first! Disconnect the washer from the power outlet before beginning any troubleshooting.
  2. Locate the Drain Hose: Find the drain hose at the back of the washer.
  3. Check the Drain Hose for Kinks: Make sure the hose isn’t bent or kinked, as this can restrict water flow. Straighten it out if necessary.
  4. Detach the Drain Hose: Carefully detach the drain hose from the drainpipe where it connects to your house plumbing. Have a bucket ready to catch any water that spills out.
  5. Inspect the Drainpipe: Shine a flashlight into the drainpipe to check for any clogs. You can use a plumber’s snake or a stiff wire to clear any obstructions.
  6. Check for Drain Hose Blockage: Hold the drain hose up and try to pour water through it into a bucket. If the water doesn’t flow freely, there’s a blockage.
  7. Flush the Drain Hose: Connect a garden hose to the end of the drain hose and flush it with water to dislodge any debris. Be careful not to use too much pressure.
  8. Locate the Drain Pump Filter: Refer to your washer’s manual to find the location of the drain pump filter. It’s usually located at the front, near the bottom of the washer. Some models require you to remove a panel to access it.
  9. Drain the Remaining Water: Before removing the filter, place a shallow pan or towels underneath to catch any remaining water.
  10. Clean the Drain Pump Filter: Carefully remove the filter (usually by unscrewing it or pulling it out). Clean it thoroughly under running water, removing any lint, hair, or debris.
  11. Inspect the Drain Pump Impeller: With the filter removed, look inside the drain pump housing. Check for any visible obstructions, such as coins or small objects, that might be preventing the impeller (the spinning part) from turning. You might need pliers to carefully remove the object.
  12. Reassemble and Test: Reinstall the drain pump filter, reattach the drain hose to the drainpipe, and plug the washer back in.
  13. Run a Test Cycle: Select a short wash cycle and observe if the washer drains properly.
  14. Check the Lid Switch (If Applicable): If the washer still doesn’t drain, the lid switch might be the issue. Visually inspect the switch for any damage. (Testing this switch requires multimeter skills, and might need professional help.)

Fix the Issue Without Buying Parts

Before considering replacing parts, try these free methods:

  • Reset the Washer: Unplug the washer for 1-2 minutes to reset the electronic controls. Plug it back in and try running a drain cycle.
  • Inspect Drain Hose Routing: Ensure the drain hose has a high loop before entering the drain pipe. This prevents siphoning.
  • Regular Maintenance: Run a washer cleaner cycle with vinegar or a commercial cleaner monthly to prevent buildup.

When Replacement Might Be Necessary

If the troubleshooting steps above don’t resolve the issue, the drain pump itself may be faulty and require replacement. This usually costs between $50 and $150 for the part, plus labor if you hire a technician. Another part that could require replacement (though less commonly) is the lid switch, with a similar cost range. It’s best to confirm the diagnosis with a qualified appliance repair technician before purchasing any replacement parts.

Safety Warning

  • Always unplug the washer from the power outlet before performing any repairs.
  • Be careful when working with water to avoid electric shock.
  • Clean up any spilled water immediately to prevent slips and falls.
  • If you are uncomfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Bucket
  • Towels
  • Flashlight
  • Plumber’s snake (optional)
  • Garden hose (optional)

FAQ

Here are some frequently asked questions about Kenmore washers not draining:

  • Q: Why is my Kenmore washer making a humming noise but not draining?
    A: This usually indicates that the drain pump is trying to work but is blocked by an obstruction. Check the drain pump filter and impeller.
  • Q: How often should I clean the drain pump filter?
    A: It’s recommended to clean the drain pump filter every 3-6 months, or more frequently if you wash a lot of heavily soiled items.
  • Q: Can I use a drain cleaner in my washing machine?
    A: No, it’s not recommended to use chemical drain cleaners in your washing machine, as they can damage the internal components.
  • Q: My washer drains slowly. What could be the cause?
    A: A slow drain is often caused by a partially clogged drain hose or drain pump filter.

Conclusion

A Kenmore washer that won’t drain can be a frustrating problem, but with a little troubleshooting, you can often resolve the issue yourself. Start with the simple steps, like checking the drain hose and filter, before considering more complex repairs. Remember, if you’re uncomfortable performing any of these steps, it’s always best to consult a qualified appliance repair technician. Don’t give up yet; many times, you can fix this yourself and save a costly service call!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 1

Looking for more diagnostic guides? Explore our complete Washing Machine Problems 1 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top