Introduction
Discovering your Kenmore side-by-side refrigerator isn’t freezing can be a frustrating and concerning situation. Not only can it lead to food spoilage, costing you money, but it can also be a sign of a larger problem with your appliance. A freezer that isn’t cold enough can quickly thaw frozen foods, making them unsafe to eat. Addressing this issue promptly is crucial to prevent food waste and ensure your family’s food safety. Often, the problem seems to arise out of nowhere, leaving you wondering what went wrong. Fortunately, many potential causes are relatively simple to diagnose and fix at home.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Side By Side Refrigerator Not Freezing.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of kenmore side by side refrigerator not freezing
Several factors can contribute to a Kenmore side-by-side refrigerator not freezing properly:
- Blocked Vents: Air circulates between the freezer and refrigerator compartments through vents. If these are blocked by food items, the freezer may not receive enough cold air.
- Dirty Condenser Coils: These coils, located at the back or bottom of the fridge, release heat. When covered in dust, they can’t function efficiently.
- Faulty Door Seal: A worn or damaged door seal allows warm air to enter the freezer, raising the temperature.
- Incorrect Temperature Settings: Check that the temperature settings for both the freezer and refrigerator are set correctly.
- Overloaded Freezer: Packing too much food into the freezer can restrict airflow and prevent proper cooling.
- Defrost System Issues: The defrost system prevents ice buildup on the evaporator coils. If this system fails, ice can block the coils, hindering cooling.
- Faulty Evaporator Fan Motor: This fan circulates cold air within the freezer. A malfunctioning fan won’t distribute cold air effectively.
- Damaged Start Relay/Overload: A faulty start relay or overload component will cause the compressor to not start, resulting in failure to cool.
Symptoms Checklist
Here are some indicators that your Kenmore side-by-side refrigerator is not freezing properly:
- Freezer temperature is above 32F (0C).
- Food in the freezer is thawing or feels soft.
- Ice cream is melting.
- Condensation or frost buildup inside the freezer.
- The refrigerator compartment is warmer than usual.
- The refrigerator is running constantly.
- Unusual noises coming from the refrigerator.
How to Fix kenmore side by side refrigerator not freezing Step-by-Step Guide
- Check Temperature Settings: Ensure the freezer temperature is set to the recommended setting (typically around 0F or -18C).
- Inspect Door Seals: Examine the door seals for any tears, cracks, or gaps. Clean the seals with a damp cloth to remove any debris.
- Clear Blocked Vents: Make sure the vents inside the freezer and refrigerator compartments are not blocked by food items. Rearrange the food to allow for proper airflow.
- Clean Condenser Coils: Unplug the refrigerator. Locate the condenser coils (usually at the back or bottom of the fridge). Use a vacuum cleaner with a brush attachment to remove dust and debris.
- Defrost the Freezer Manually: If there’s excessive frost buildup, unplug the refrigerator and allow the freezer to defrost completely. Place towels inside to absorb melting water.
- Check Evaporator Fan: With the freezer empty, listen for the evaporator fan running when the refrigerator is on. If you don’t hear it, it may be faulty. (This often requires accessing the back panel inside the freezer).
- Ensure Proper Airflow: Don’t overfill the freezer. Leave space between items to allow for proper air circulation.
- Check the Door Switch: Make sure the freezer door switch is working correctly. This switch activates the light and fan when the door is opened. If it’s faulty, the fan may not run when the door is closed.
- Reset the Refrigerator: Unplug the refrigerator for 10-15 minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
- Check the Defrost Timer/Control Board: (This is more advanced.) Locate the defrost timer (often behind a panel) or control board. These components control the defrost cycle. They can be difficult to test without specialized equipment.
Fix the Issue Without Buying Parts
Often, you can resolve the issue without buying any parts:
- Reset: As mentioned above, unplugging the refrigerator for 10-15 minutes can sometimes reset the system.
- Cleaning: Regularly cleaning the condenser coils and ensuring proper airflow can prevent many issues.
- Recalibration: Some models have a recalibration feature in the control panel. Check your owner’s manual for instructions.
- Inspection Tips: Regularly inspect the door seals and vents for any signs of damage or blockage.
- Maintenance Basics: Follow the manufacturer’s recommendations for cleaning and maintenance.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and the refrigerator still isn’t freezing properly, replacement of a component might be necessary. The compressor ($200-$500), evaporator fan motor ($50-$150), or control board ($100-$300) are common parts that fail. However, consider the age of your refrigerator. If it’s over 10 years old, replacing the entire unit might be more cost-effective.
Safety Warning
- Always unplug the refrigerator before performing any maintenance or repairs.
- Avoid working on electrical components if you’re not comfortable with electrical work. Consult a qualified technician.
- Be careful when handling sharp tools or components.
- Keep children and pets away from the work area.
- Ensure the floor is dry to prevent electric shock.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Vacuum cleaner with brush attachment
- Damp cloth or sponge
- Towel
- Flashlight
FAQ
Here are some common questions and answers:
-
Q: How often should I clean the condenser coils?
A: It’s recommended to clean the condenser coils every 6 months to a year. -
Q: What should the temperature be set to in my freezer?
A: The ideal freezer temperature is around 0F (-18C). -
Q: Why is my refrigerator running constantly?
A: This could be due to dirty condenser coils, a faulty door seal, or an issue with the defrost system. -
Q: How do I test my door seal?
A: Close the door on a dollar bill. If you can easily pull the bill out, the seal may need replacing.
Conclusion
Troubleshooting a Kenmore side-by-side refrigerator that’s not freezing can seem daunting, but by following these steps, you can often identify and resolve the issue yourself. Start with the simplest solutions, such as checking the temperature settings and cleaning the condenser coils. If the problem persists, consider more advanced troubleshooting steps. Remember to prioritize safety and consult a qualified technician if you’re uncomfortable with any of the procedures. Often you can get your refrigerator back to freezing properly. However, if after a thorough diagnostic, the issue persists, it is time to consider calling in a professional.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Refrigerator Problems 4 section for step-by-step troubleshooting solutions.
