Introduction
A refrigerator that isn’t cooling properly is a homeowner’s nightmare! Food can spoil quickly, leading to wasted money and potential health hazards. If your Kenmore side-by-side fridge is suddenly warmer than usual, or if you notice food is not staying fresh as long, it’s important to address the issue immediately. This guide will walk you through common causes and simple fixes you can try yourself before calling a repair technician.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Side By Side Fridge Not Cooling.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of Kenmore Side by Side Fridge Not Cooling
Here are some frequent reasons why your Kenmore side-by-side fridge might not be cooling correctly:
- Dirty Condenser Coils: These coils release heat. When covered in dust, they can’t do their job effectively.
- Blocked Vents: The vents inside the fridge circulate cold air. If blocked by food items, the airflow is restricted.
- Faulty Door Seals: Damaged or dirty door seals allow warm air to enter, forcing the fridge to work harder.
- Incorrect Temperature Settings: It might sound obvious, but double-check that the temperature settings are correct.
- Overloaded Refrigerator: Packing the fridge too full can restrict airflow and prevent proper cooling.
- Frost Buildup in the Freezer: Excessive frost buildup can block airflow between the freezer and refrigerator.
- Damaged Start Relay A start relay allows the refrigerator to turn on the compressor to start cooling the refrigerator.
Symptoms Checklist
Look for these signs to help confirm that your Kenmore fridge is indeed having cooling problems:
- The refrigerator compartment feels warm to the touch.
- Food is spoiling faster than usual.
- The freezer is working fine, but the fridge is warm, or vice versa.
- The fridge runs constantly but doesn’t get cold enough.
- You notice excessive frost buildup inside the freezer.
- The motor is louder than usual.
How to Fix Kenmore Side by Side Fridge Not Cooling Step-by-Step Guide
Follow these steps to troubleshoot and potentially fix your Kenmore refrigerator:
- Check the Temperature Settings: Make sure the temperature settings are correct. A good starting point is 37F (3C) for the fridge and 0F (-18C) for the freezer.
- Inspect the Door Seals: Examine the door seals for cracks, tears, or debris. Clean them with warm soapy water and a soft cloth. You can test the seal by closing the door on a dollar bill; if you can easily pull it out, the seal may need attention.
- Clean the Condenser Coils: Locate the condenser coils (usually at the back or bottom of the fridge). Unplug the refrigerator and use a vacuum cleaner with a brush attachment to remove dust and debris.
- Clear the Air Vents: Ensure that the air vents inside the refrigerator and freezer are not blocked by food items. Rearrange the contents to allow for proper airflow.
- Defrost the Freezer (If Necessary): If you see excessive frost buildup, manually defrost the freezer. Unplug the fridge and leave the door open until the frost melts completely. You can speed up the process with a fan.
- Check the Overload Protection Relay: The overload protection relay is wired to the compressor. Test the overload protection relay by using a multimeter to test the continuity. If the overload protection relay does not have continuity it should be replaced.
- Avoid Overloading the Refrigerator: Make sure there is enough space between items to allow cold air to circulate properly.
- Listen to the Compressor: The compressor is the heart of the cooling system. If you don’t hear it running or if it’s making unusual noises, there might be an issue. This may require a professional.
- Check the Condenser Fan Motor: Check to see if the condenser fan motor is working properly. The condenser fan motor helps cool the condenser coils and is located near the compressor.
- Clean the Evaporator Fan Motor: Clean the evaporator fan motor blades and check the motor for continuity. If there is no continuity you may have to replace the Evaporator Fan Motor.
- Reset the Fridge: Unplug the refrigerator for 5-10 minutes, then plug it back in. This can sometimes reset the system and resolve minor issues.
Fix the Issue Without Buying Parts
Before considering replacing parts, try these free methods:
- Reset: As mentioned above, unplugging and plugging back in can sometimes solve the problem.
- Cleaning: Regularly clean the condenser coils, door seals, and interior to maintain optimal performance.
- Recalibration (If Applicable): Some models have a recalibration function in the settings. Consult your owner’s manual.
- Inspection Tips: Look for any obvious signs of damage, such as leaks or frayed wires.
- Maintenance Basics: Avoid slamming the doors, and ensure the fridge is level for proper drainage.
When Replacement Might Be Necessary
If none of the above steps work, a component might have failed. Possible parts that can fail include the Condenser Fan Motor, Evaporator Fan Motor, Overload Protection Relay, Thermostat or Compressor. Call a certified appliance repair technician to inspect your fridge. Repair costs can range from $150 to $800+, depending on the faulty part. Replacing the entire refrigerator might be necessary if the compressor is damaged, or if the repairs are too costly in relation to the fridge’s age and value. For more related activities, check out our Lg Refrigerator Water And Ice Dispenser Not Working.
Safety Warning
- Always unplug the refrigerator before performing any maintenance or repairs.
- Be careful when working with electrical components. If you’re not comfortable, call a professional.
- Avoid working on the fridge with wet hands or on a wet floor.
- Dispose of old refrigerators properly, following local regulations.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Vacuum cleaner with brush attachment
- Warm water and mild soap
- Soft cloths or sponges
- Multimeter (for testing electrical components)
FAQ
Here are some frequently asked questions:
- Q: Why is my freezer cold, but the fridge is warm? A: This is often caused by blocked air vents between the freezer and fridge, or a faulty damper controlling airflow.
- Q: How often should I clean the condenser coils? A: Ideally, clean them every 6 months to a year.
- Q: What temperature should I set my fridge? A: 37F (3C) is a good starting point.
- Q: My fridge is running constantly. Is that normal? A: It’s not normal for a fridge to run constantly. Check for blocked vents, dirty coils, or faulty door seals.
Conclusion
Troubleshooting a Kenmore side by side fridge not cooling can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Try the simple solutions first, and don’t hesitate to call a qualified technician if you’re unsure about any step. Taking a proactive approach can save you money and prevent food spoilage.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Refrigerator Problems 4 section for step-by-step troubleshooting solutions.
