Kenmore Side By Side Freezer Not Freezing


Kenmore Side By Side Freezer Not Freezing

Introduction

Discovering your Kenmore side-by-side freezer isn’t freezing properly can be a frustrating experience. It means your food is at risk of spoiling, costing you money and creating a potential health hazard. Common situations include finding ice cream melting, food items thawing, or the freezer feeling warmer than usual. Addressing this issue quickly is crucial to prevent food spoilage and ensure your freezer continues to function efficiently, keeping your food safe and fresh.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Side By Side Freezer Not Freezing.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Kenmore Side by Side Freezer Not Freezing

Here are some common reasons why your Kenmore side-by-side freezer might not be freezing properly:

  • Door Not Sealing Properly: A worn or damaged door seal lets warm air in, affecting the freezer’s ability to maintain a cold temperature.
  • Overpacked Freezer: Too much food can block the flow of cold air and prevent proper freezing.
  • Dirty Condenser Coils: Dust and debris on the condenser coils reduce their ability to release heat, making the freezer work harder.
  • Blocked Air Vents: Items blocking the vents inside the freezer restrict cold air circulation.
  • Temperature Setting Too High: The temperature setting might be set too high, making the freezer unable to reach freezing temperatures.
  • Faulty Start Relay: The start relay helps the compressor start. If it’s failing, the compressor might not run.
  • Defrost System Issues: Problems with the defrost system can lead to excessive frost buildup, which insulates the evaporator coils and reduces cooling efficiency.
  • Condenser Fan Motor Failure: The condenser fan helps cool the compressor and condenser coils. If it’s not working, the freezer’s cooling ability will be compromised.

Symptoms Checklist

Use this checklist to confirm the issue:

  • Ice cream is soft or melting.
  • Food items are thawing or partially thawed.
  • The freezer feels warmer than usual.
  • You notice excessive frost buildup inside the freezer.
  • The freezer is running constantly without reaching the set temperature.

How to Fix Kenmore Side By Side Freezer Not Freezing Step-by-Step Guide

Follow these steps to troubleshoot and potentially fix the issue:

  1. Check the Temperature Setting: Make sure the temperature setting is at the recommended level (usually around 0F or -18C).
  2. Inspect the Door Seal: Examine the door seal for any tears, cracks, or gaps. Clean the seal with a mild detergent and warm water.
  3. Clear Air Vents: Ensure that air vents inside the freezer are not blocked by food items. Rearrange items to allow proper airflow.
  4. Defrost the Freezer: If there’s excessive frost buildup, manually defrost the freezer. Unplug the freezer and leave the door open until the frost melts.
  5. Clean the Condenser Coils: Locate the condenser coils (usually on the back or bottom of the freezer) and clean them with a vacuum cleaner and a brush attachment.
  6. Check the Condenser Fan: Locate the condenser fan near the compressor. Make sure it’s spinning freely and not blocked by any debris. Remove any obstructions.
  7. Check the Freezer Light Switch: A stuck light switch can keep the light on, generating heat. Press the switch to ensure it moves freely.
  8. Listen to the Compressor: The compressor is usually located at the bottom of the freezer. Listen to hear if it’s running. If it’s silent, there might be a problem.
  9. Unplug and Plug Back In: Sometimes a simple reset can resolve minor issues. Unplug the freezer for 5-10 minutes, then plug it back in.
  10. Check for Overpacking: Remove some items from the freezer to ensure there’s enough space for cold air to circulate.
  11. Test the Outlet: Plug another appliance into the outlet to make sure it’s providing power to the freezer.
  12. Inspect the Start Relay: This requires removing the cover to the compressor. If it’s rattling or looks burned, it could be faulty. (Note: proceed with caution or consult a professional).

Fix the Issue Without Buying Parts

You can try these free methods before considering replacement parts:

  • Reset: Unplug the freezer for 5-10 minutes and plug it back in.
  • Cleaning: Clean the door seal, condenser coils, and interior vents.
  • Inspection Tips: Visually inspect all components mentioned above.
  • Maintenance Basics: Regularly clean the condenser coils and door seal to prevent future issues.

When Replacement Might Be Necessary

If the above steps don’t resolve the issue, certain parts might need replacing. The most common failing parts are the condenser fan motor ($50 – $150), the start relay ($20 – $50), or the defrost thermostat ($20 – $60). If the compressor is failing, it might be more cost-effective to replace the entire freezer due to the high cost of compressor replacement (around $300 – $800, including labor). For more related activities, check out our My Lg Refrigerator Is Not Making Enough Ice.

Safety Warning

  • Always unplug the appliance before performing any maintenance or repairs.
  • Avoid working on electrical components with wet hands or in a wet environment.
  • If you’re not comfortable working with electrical components, consult a qualified technician.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Vacuum cleaner with brush attachment
  • Mild detergent
  • Warm water
  • Wrench
  • Multimeter (for testing electrical components optional)

FAQ

Here are some frequently asked questions:

  • Q: How long should my freezer take to reach freezing temperature? A: Typically, it should take around 2-4 hours after plugging it in.
  • Q: Why is my freezer running constantly? A: This could be due to a dirty condenser coils, a faulty door seal, or a problem with the defrost system.
  • Q: How often should I defrost my freezer? A: Manually defrost freezers should be defrosted whenever the frost buildup exceeds inch.
  • Q: What is the ideal temperature for my freezer? A: The ideal temperature for a freezer is 0F (-18C).

Conclusion

Troubleshooting a Kenmore side-by-side freezer that’s not freezing can seem daunting, but by following these steps, you can often diagnose and resolve the issue yourself. Remember to prioritize safety and be thorough in your inspection. If you’re not comfortable performing the repairs yourself, don’t hesitate to call a qualified appliance technician for assistance. Fixing the problem yourself can save you money and help extend the life of your freezer.

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 4

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 4 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top