Introduction
Is your Kenmore refrigerator model 795 ice maker refusing to produce ice? This is a common problem, and a very frustrating one, especially during hot weather or when you need ice for entertaining. An ice maker malfunction can quickly turn into a major inconvenience, disrupting your daily routine and potentially leading to wasted food if the freezer temperature isn’t properly maintained due to the constant door openings to check for ice. Don’t panic! We’ll walk you through a series of easy-to-follow troubleshooting steps to help you get your ice maker back up and running.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Kenmore Refrigerator Model 795 Ice Maker Not Working.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of kenmore refrigerator model 795 ice maker not working
Here are some of the most frequent culprits behind a non-working ice maker in your Kenmore 795 refrigerator:. For more related activities, check out our Lg Double Door Refrigerator Freezer Not Cooling.
- Ice Maker is Turned Off: Sounds simple, but it happens! There’s often a switch or button to disable the ice maker.
- Water Supply Issues: A kinked or frozen water line can prevent water from reaching the ice maker.
- Water Filter Clogged: A dirty water filter restricts water flow, impacting ice production.
- Freezer Temperature Too High: The freezer needs to be cold enough (around 0-5F) for ice to form.
- Ice Jam in the Ejector Arm: Ice can get stuck and block the ejector arm, preventing it from dispensing ice.
- Faulty Water Inlet Valve: This valve controls the flow of water to the ice maker. If it’s defective, water won’t reach the ice maker.
- Defective Ice Maker Module: The ice maker module is the brain of the ice maker. If it malfunctions, ice production will stop.
- Arm is in the Up Position: The ice maker arm needs to be down to call for ice. If it’s up, no ice will be made.
Symptoms Checklist
Use this checklist to confirm the issue and guide your troubleshooting:
- No ice production at all.
- Ice maker is making clicking or whirring sounds but no ice is produced.
- Ice cubes are small or misshapen.
- Water leaks around the ice maker area.
- Ice dispenser is not working, even though the ice maker seems to be making ice (separate issue).
- Freezer temperature is warmer than usual.
How to Fix kenmore refrigerator model 795 ice maker not working Step-by-Step Guide
Follow these steps in order. Some steps may solve your issue immediately.
- Check the Ice Maker Switch: Locate the on/off switch or button for the ice maker. Make sure it’s turned ON. It’s usually located on the ice maker itself or on the control panel.
- Inspect the Freezer Temperature: Verify the freezer temperature is set between 0-5F (-18 to -15C). Adjust the thermostat if needed. Give it 24 hours to stabilize.
- Check the Ice Maker Arm: Ensure the ice maker’s feeler arm (the wire or plastic arm that detects the ice level) is in the DOWN position. If it’s up, the ice maker won’t produce ice.
- Examine the Water Line: Look for any kinks or bends in the water line running to your refrigerator. Straighten any kinks to ensure proper water flow.
- Check the Water Filter: Locate the water filter (usually in the refrigerator compartment or at the bottom front). Replace the filter if it’s been longer than 6 months since the last replacement, or if you notice reduced water pressure.
- Flush the Water Line: After replacing the filter, dispense water for about 5 minutes to flush out any air or debris from the water line.
- Listen for the Water Inlet Valve: After 24 hours, listen closely to the refrigerator when the ice maker should be cycling (usually every 1-3 hours). You should hear a humming sound as the water inlet valve opens to fill the ice maker. If you don’t hear anything, the valve may be faulty (but test further before replacing it).
- Manually Fill the Ice Maker Tray: If you hear the water inlet valve and suspect the issue is fill volume, manually fill the ice maker tray with water. Observe if it freezes and ejects ice correctly.
- Check for Ice Jams: Carefully inspect the ice maker and the ice dispenser chute for any ice jams that might be blocking the ice-making or dispensing process. Use a plastic utensil (never metal) to gently dislodge any ice.
- Defrost the Ice Maker: If you suspect a buildup of ice is preventing the ice maker from working, manually defrost it. Turn off the ice maker, and leave the freezer door open for a few hours (or overnight) to allow the ice to melt. You can also use a hairdryer on a low setting to carefully melt the ice.
- Hard Reset the Refrigerator: Unplug the refrigerator from the power outlet for 5-10 minutes. This can sometimes reset the ice maker’s control board and resolve minor glitches.
Fix the Issue Without Buying Parts
Before you consider replacing any parts, try these free methods:
- Reset: The hard reset described in step 11 is often effective.
- Cleaning: Regular cleaning of the freezer and ice maker area can prevent ice jams and maintain optimal performance.
- Inspection Tips: Regularly check the water line for kinks and the water filter for clogging.
- Maintenance Basics: Replace the water filter every 6 months, even if it doesn’t seem dirty.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and your ice maker still isn’t working, a replacement part may be necessary. Common parts that fail include the water inlet valve (estimated cost: $30-$70 USD), the ice maker module ($80-$150 USD), or the entire ice maker assembly ($150-$300 USD). Consider consulting a qualified appliance repair technician for diagnosis and repair before replacing the entire assembly.
Safety Warning
- Always unplug the refrigerator from the power outlet before performing any maintenance or repairs.
- Avoid working on electrical components with wet hands or on a wet floor.
- Be careful when using tools to avoid injury.
- If you are uncomfortable performing any of these steps, contact a qualified appliance repair technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Adjustable wrench
- Towels
- Plastic utensil (for dislodging ice)
FAQ
Here are some frequently asked questions about Kenmore 795 ice maker problems:
- Q: How long does it take for the ice maker to make ice after being turned on? A: It typically takes 24-48 hours for a new ice maker to start producing ice.
- Q: Why is my ice maker making small or hollow ice cubes? A: This is usually caused by low water pressure or a clogged water filter.
- Q: How do I know if my water inlet valve is faulty? A: If you don’t hear the valve humming when the ice maker is cycling, and you’ve ruled out other causes, the valve may be defective.
- Q: Is it normal for the ice maker to make noise? A: Yes, it’s normal to hear some clicking or whirring sounds as the ice maker cycles.
Conclusion
Troubleshooting a non-working ice maker can seem daunting, but by following these steps, you can often resolve the issue yourself. Remember to take your time and be thorough. Before calling a technician, you have a great chance of fixing “kenmore refrigerator model 795 ice maker not working” issue.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Refrigerator Problems 4 section for step-by-step troubleshooting solutions.
