Kenmore 795 Compressor


Kenmore 795 Compressor

Introduction

Is your Kenmore 795 refrigerator not cooling properly? One common culprit could be the compressor, the heart of your refrigerator’s cooling system. A malfunctioning compressor prevents your fridge from maintaining the proper temperature, leading to spoiled food and wasted energy. If you notice your fridge isn’t as cold as it should be, or you hear unusual noises coming from the back, addressing the compressor issue is crucial to prevent further damage and keep your groceries fresh.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Kenmore 795 Compressor.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of Kenmore 795 Compressor Issues

Here are some common reasons why the compressor in your Kenmore 795 refrigerator might be failing:

  • Overload Relay Failure: The overload relay protects the compressor from overheating. If it fails, the compressor won’t start.
  • Starting Capacitor Issues: The starting capacitor gives the compressor the initial boost it needs to start. A faulty capacitor can prevent the compressor from running.
  • Dirty Condenser Coils: Dirty coils restrict airflow and make the compressor work harder, potentially leading to overheating and failure.
  • Refrigerant Leaks: Low refrigerant levels force the compressor to run constantly, which can shorten its lifespan.
  • Power Surges: Unexpected power surges can damage the compressor’s internal components.
  • Mechanical Wear and Tear: Like any mechanical component, the compressor can wear out over time due to normal use.
  • Voltage Issues: Insufficient or inconsistent voltage can damage the compressor motor.
  • Blocked Vents: Blocked vents inside the refrigerator can cause the compressor to overheat.

Symptoms Checklist

Here are some signs that your Kenmore 795 compressor might be having problems:

  • The refrigerator is not cooling properly, or not cooling at all.
  • The freezer is not freezing items solid.
  • You hear unusual noises coming from the back of the refrigerator (buzzing, clicking, or grinding).
  • The compressor is hot to the touch.
  • The refrigerator runs constantly without shutting off.
  • The refrigerator has frost buildup.

How to Fix Kenmore 795 Compressor Step-by-Step Guide

Here are some troubleshooting steps you can try before calling a technician:

  1. Unplug the Refrigerator: Always disconnect the refrigerator from the power outlet before attempting any repairs.
  2. Clean the Condenser Coils: Locate the condenser coils (usually on the back or bottom of the refrigerator) and clean them with a vacuum cleaner and a brush attachment.
  3. Check the Overload Relay and Starting Capacitor: These components are usually located near the compressor. Visually inspect them for any signs of damage (bulging, burning, or cracks). Note: Testing these components requires a multimeter and some electrical knowledge. If you are uncomfortable, skip this step.
  4. Check the Power Outlet: Ensure the outlet is providing the correct voltage using a multimeter or by plugging in another appliance.
  5. Listen to the Compressor: Place your ear near the compressor. Can you hear it trying to start? A humming sound might indicate a starting capacitor issue.
  6. Check the Refrigerator’s Vents: Ensure that the vents inside the refrigerator are not blocked by food containers.
  7. Defrost the Refrigerator: If frost has built up, manually defrost the refrigerator to ensure proper airflow.
  8. Check the Door Seals: Make sure the door seals are clean and create a tight seal to prevent warm air from entering the refrigerator.
  9. Reset the Refrigerator: Unplug the refrigerator for 5-10 minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.

Fix the Issue Without Buying Parts

Before resorting to replacing parts, try these free methods:

  • Full Reset: Unplug the refrigerator for at least 30 minutes to reset the system.
  • Deep Cleaning: Thoroughly clean the condenser coils and the interior of the refrigerator.
  • Inspect Wiring: Check the visible wiring for any loose connections or damage.
  • Proper Loading: Avoid overpacking the refrigerator, as this can restrict airflow.
  • Maintain Ventilation: Ensure the refrigerator has adequate space around it for proper ventilation.

When Replacement Might Be Necessary

If you’ve tried the troubleshooting steps and the compressor is still not working, replacement might be necessary. A new Kenmore 795 compressor can cost between $200 and $500 (USD), plus labor if you hire a professional. Common parts that fail along with the compressor include the overload relay, starting capacitor, and sometimes the control board.

Safety Warning

  • Always unplug the refrigerator before attempting any repairs.
  • Avoid working on electrical components if you are not comfortable or experienced.
  • Keep your work area dry to prevent electric shock.
  • Be careful when handling tools to avoid injury.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Vacuum cleaner with brush attachment
  • Multimeter (for testing electrical components, optional)
  • Wrench
  • Gloves

FAQ

Here are some frequently asked questions about Kenmore 795 compressor issues:

  • Q: How do I know if my compressor is actually bad? A: If the refrigerator is not cooling, you hear unusual noises, and you’ve tried the troubleshooting steps, the compressor is likely the issue.
  • Q: Can I replace the compressor myself? A: Replacing a compressor involves working with refrigerant and electrical components, which requires specialized knowledge and equipment. It’s generally recommended to hire a qualified technician.
  • Q: How much does it cost to have a technician replace the compressor? A: Labor costs can vary, but you can expect to pay between $200 and $500 (USD) for a technician to replace the compressor.
  • Q: How long does a refrigerator compressor typically last? A: A well-maintained refrigerator compressor can last 10-15 years.

Conclusion

Troubleshooting a Kenmore 795 compressor issue can seem daunting, but by following these steps, you can often identify and resolve the problem yourself. Remember to prioritize safety and don’t hesitate to call a qualified technician if you’re uncomfortable with any of the procedures. With a little effort, you can get your refrigerator running smoothly again and save yourself the cost of a new appliance. Try the DIY steps first; you might be surprised at what you can fix!

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Refrigerator Problems 1

Looking for more diagnostic guides? Explore our complete Refrigerator Problems 1 section for step-by-step troubleshooting solutions.

📚 Related Articles

Scroll to Top