Introduction
Is your Haier HWMP55-918 washing machine refusing to drain after a wash cycle? This is a common problem that many homeowners face, and it can be quite frustrating. A washing machine that won’t drain can lead to overflowing, water damage, and the inability to wash further loads. Addressing this issue quickly is important to prevent further complications and get your laundry routine back on track. This guide will walk you through troubleshooting steps to resolve the draining issue of your Haier HWMP55-918, even if you have no prior technical experience.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Haier Hwmp55 918 Not Draining.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of haier hwmp55 918 not draining
Several factors can cause your Haier HWMP55-918 washing machine to not drain properly:
- Clogged Drain Hose: The hose that carries water away from the machine can become blocked with lint, debris, or small objects.
- Blocked Drain Pump Filter: Many washing machines have a filter to catch lint and small items before they reach the pump. This filter can become clogged.
- Kinked or Twisted Drain Hose: If the drain hose is bent or twisted, it can restrict water flow.
- Faulty Drain Pump: The drain pump is responsible for pushing the water out of the machine. If it’s broken, it won’t work.
- Clogged Standpipe: The pipe that the drain hose empties into (the standpipe) can be blocked.
- Air Lock: Sometimes air can get trapped in the drain system, preventing the pump from working effectively.
- Control Panel/Timer Issues: Rarely, the washing machine’s control panel may not be properly signaling the drain pump to activate.
- Excessive Suds: Using too much detergent, especially non-HE (High Efficiency) detergent, can create excessive suds that hinder draining.
Symptoms Checklist
Here are some symptoms that suggest your Haier HWMP55-918 is not draining:
- Standing water in the washing machine drum after a wash cycle.
- The washing machine stops mid-cycle.
- The washing machine displays an error code related to draining (refer to your user manual).
- Unusual noises coming from the washing machine during the drain cycle.
- The drain hose is not emptying water.
How to Fix haier hwmp55 918 not draining Step-by-Step Guide
Follow these steps to troubleshoot your Haier HWMP55-918:
- Unplug the Washing Machine: Before you begin any troubleshooting, disconnect the washing machine from the power outlet for your safety.
- Check the Drain Hose for Kinks: Inspect the entire length of the drain hose for any bends, twists, or kinks that might be restricting water flow. Straighten the hose if necessary.
- Inspect the Drain Hose Connection: Ensure the drain hose is securely connected to both the washing machine and the standpipe.
- Check the Standpipe: Remove the drain hose from the standpipe. Use a flashlight to look down the standpipe for any visible blockages. You can try using a plumbing snake or a straightened coat hanger to carefully clear any obstructions.
- Locate and Clean the Drain Pump Filter: Consult your owner’s manual to find the location of the drain pump filter. Usually it’s a small door or panel on the front, bottom of the machine.
- Prepare for Water: Place a shallow pan or towels under the filter access point to catch any water that may spill out.
- Open the Filter Access: Carefully open the drain pump filter access. Some models require you to unscrew a cap.
- Remove and Clean the Filter: Gently pull out the filter. Remove any lint, hair, coins, or other debris that may be clogging it. Rinse the filter thoroughly under running water.
- Reinstall the Filter: Make sure the filter is properly seated before closing the access panel.
- Check for Air Lock: After cleaning the filter, try running a short rinse cycle to see if the machine drains. If not, the air lock may be the problem.
- Attempt to Clear Air Lock: Turn off and unplug the machine. Disconnect drain hose from the standpipe. Lower the drain hose to the floor to allow for potential water to spill out. Re-attach the hose to the standpipe. Repeat this process a couple of times.
- Run a Test Cycle: Plug the washing machine back in and run a short rinse and spin cycle to test if the draining issue has been resolved.
- Check the Detergent Usage: Ensure you are using the correct type and amount of detergent, and only use HE (High Efficiency) detergent. Too much detergent can cause excess suds.
Fix the Issue Without Buying Parts
Often, the draining problem can be solved without needing to purchase replacement parts. Try these free and simple methods:. For more related activities, check out our Hoover Dynamic Next Leaking From Bottom.
- Cleaning the Drain Hose and Filter: Regular cleaning of these components can prevent clogs.
- Checking for Kinks: Ensure your drain hose is free of any bends or obstructions.
- Reduce Detergent: Reduce the amount of detergent used, and make sure you are using HE (High Efficiency) detergent.
- Air Lock Removal: Re-position the drain hose, and test draining.
- Machine Reset: Turn off and unplug the machine for an hour, then plug it back in.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and your washing machine still won’t drain, the drain pump might be faulty and need replacement. A new drain pump typically costs between $50 and $150 USD, depending on the brand and model. The drain hose itself may also need replacement if it’s damaged. Timer/Control panel repair can range $100-$300. This is best left to the professional.
Safety Warning
- Always unplug the washing machine from the power outlet before performing any maintenance or repairs.
- Be careful when handling water; mop up any spills to prevent slips and falls.
- If you are uncomfortable working with electrical appliances, consult a qualified technician.
Tools You May Need
- Screwdrivers (Phillips and flathead)
- Pliers
- Flashlight
- Shallow pan or towels
- Plumbing snake or straightened coat hanger (optional)
FAQ
Here are some frequently asked questions about washing machine draining problems:
- Q: Why is my washing machine making a loud noise during the drain cycle? A: This could indicate a foreign object caught in the drain pump. Clean the drain pump filter.
- Q: What does error code related to “draining problem” mean on my Haier HWMP55-918? A: Consult your owners manual. Common draining code are related to the pump, hose, or filter clog.
- Q: How often should I clean the drain pump filter? A: It’s recommended to clean the filter every 1-3 months, depending on how often you use your washing machine.
- Q: Can I use regular detergent in my HE (High Efficiency) washing machine? A: No, you should only use HE detergent, as regular detergent produces too many suds.
Conclusion
Don’t panic if your Haier HWMP55-918 washing machine won’t drain. By following these troubleshooting steps, you may be able to fix the problem yourself. Take your time and work through the steps carefully. However, if you’ve exhausted these options and the machine still isn’t draining, it might be time to call a qualified appliance repair technician for assistance. Remember, safety first!
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 3 section for step-by-step troubleshooting solutions.
