Introduction
Is your Goodman outside unit not turning on? This can be a frustrating problem, especially during hot weather! When your outside AC unit fails to start, it means your home won’t get the cool air it needs. This can lead to uncomfortable temperatures and potentially higher humidity inside. The good news is that many of the reasons for this issue are simple to check and fix yourself. Addressing this promptly will not only restore your comfort but can also prevent further damage to your system.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Goodman Outside Unit Not Turning On.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of goodman outside unit not turning on
Here are some of the most common reasons why your Goodman outside unit might not be turning on:. For more related activities, check out our Coils On Ac Unit Frozen.
- Tripped Circuit Breaker: The breaker dedicated to your AC unit might have tripped due to an electrical surge or overload.
- Thermostat Setting: The thermostat might not be set correctly to “Cool” or the temperature might be set too high.
- Dirty Air Filter: A clogged air filter restricts airflow, causing the unit to overheat and potentially shut down.
- Disconnected Disconnect Switch: The outdoor disconnect switch (a safety switch near the unit) might be switched off.
- Overheating: The unit itself might be overheating due to poor ventilation or other issues.
- Faulty Capacitor: The capacitor helps start the motor; a failed capacitor is a common culprit.
- Frozen Evaporator Coil: Ice buildup on the indoor coil can prevent the outside unit from running.
- Contactor Issues: The contactor is an electrical switch that allows power to flow to the compressor and fan motor. If it’s damaged, the unit won’t start.
- Wiring Problems: Loose or damaged wiring can interrupt the power supply to the unit.
Symptoms Checklist
Use this checklist to help identify the problem more accurately:
- The indoor fan is blowing, but the air isn’t cold.
- The outside unit is completely silent no humming or fan noise.
- You hear a humming sound from the outside unit, but the fan isn’t spinning.
- The circuit breaker for the AC keeps tripping.
- The thermostat is set to “Cool,” but the outside unit doesn’t respond.
- You notice ice buildup on the copper pipes of the indoor unit.
How to Fix goodman outside unit not turning on Step-by-Step Guide
Follow these steps to troubleshoot and potentially fix the issue:
- Check the Thermostat: Make sure the thermostat is set to “Cool” and the temperature is set lower than the current room temperature.
- Inspect the Air Filter: Remove and inspect the air filter. If it’s dirty, replace it with a clean one.
- Check the Circuit Breaker: Locate the circuit breaker panel and check the breaker for the AC unit. If it’s tripped, flip it all the way off and then back on.
- Inspect the Disconnect Switch: Locate the disconnect switch near the outside unit and make sure it’s in the “On” position.
- Check for Obstructions: Ensure that the outside unit is free from obstructions such as leaves, grass, or debris.
- Wait for Overheating to Clear: If you suspect overheating, turn the unit off and let it cool down for a few hours before trying to restart it.
- Check the Fan Blades: Carefully inspect the fan blades on the outside unit for any obstructions or damage.
- Inspect Wiring (Visually): Look for any loose or damaged wires around the outside unit. (Important: only perform a visual check; do not attempt to repair wiring unless you are qualified.)
- Check the Contactor: Locate the contactor inside the service panel of the outside unit. Using a non-conductive object (like a plastic pen), gently push the contactor in. If the unit starts, the contactor may be faulty. (Note: Proceed with extreme caution when working around electrical components.)
- Examine the Evaporator Coil (Indoors): Check the evaporator coil inside the indoor unit for ice buildup. If there’s ice, turn the AC off and let it thaw for several hours.
- Clean the Condenser Coils: Use a garden hose (with a gentle spray nozzle) to clean the condenser coils on the outside unit. Spray from the inside out to remove dirt and debris.
- Reset the Unit: Turn off the power to the AC unit at the breaker for about 30 minutes and then turn it back on. This can sometimes reset the system.
Fix the Issue Without Buying Parts
Many common AC problems can be resolved without needing to purchase new parts. Regularly cleaning your air filter can prevent overheating. Inspecting and clearing obstructions around the outside unit can improve airflow. Resetting the circuit breaker and the unit itself can sometimes resolve temporary electrical glitches. Ensuring proper ventilation around the unit is also crucial for efficient operation.
When Replacement Might Be Necessary
If you’ve tried all the troubleshooting steps and the Goodman outside unit still isn’t turning on, a component might need replacing. Common failing parts include the capacitor (estimated cost: $50-$150), the contactor (estimated cost: $30-$100), or the fan motor (estimated cost: $150-$400). In some cases, the compressor itself might be failing, which is a more expensive repair and could cost $500-$1500. If the unit is older than 10-15 years and requires significant repairs, consider replacing the entire unit.
Safety Warning
- Always turn off the power to the AC unit at the circuit breaker before performing any maintenance or inspection.
- Avoid working on electrical components if you are not comfortable or qualified.
- Never touch electrical components with wet hands or while standing on a wet surface.
- Be cautious when working around the fan blades, as they can be sharp.
- If you are unsure about any step, consult a qualified HVAC technician.
Tools You May Need
- Screwdriver (Phillips and Flathead)
- Wrench
- Garden Hose with Spray Nozzle
- Non-Contact Voltage Tester (for checking power safely)
- Air Filter (Replacement)
FAQ
Q: Why is my AC unit humming but not starting?
A: This could indicate a problem with the capacitor or the fan motor. The capacitor is what gives the motor the initial “boost” to start spinning.
Q: How often should I change my air filter?
A: Generally, you should change your air filter every 1-3 months, depending on usage and air quality.
Q: What does it mean if my AC unit keeps tripping the circuit breaker?
A: This could indicate an electrical problem, such as a short circuit or an overloaded circuit. Call a qualified electrician or HVAC technician.
Q: Can I clean the AC coils myself?
A: Yes, you can clean the condenser coils on the outside unit using a garden hose with a gentle spray nozzle. Be sure to turn off the power to the unit first.
Conclusion
Troubleshooting a Goodman outside unit that’s not turning on might seem daunting, but many issues can be resolved with simple checks and maintenance. By following this guide, you can confidently identify and address common problems. However, your safety is the top priority, so if the troubleshooting steps seem too complicated, don’t hesitate to contact a qualified HVAC technician. Often, it’s best to try simple DIY fixes before incurring the costs of a technician visit. Take a systematic approach, and you’ll likely restore your home’s cooling comfort in no time!
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Air Conditioner Troubleshooting 4 section for step-by-step troubleshooting solutions.
