Drain Samsung Washing Machine

Introduction

A washing machine that won’t drain is a common and frustrating problem. It can leave your clothes soaking wet, your laundry room a mess, and your laundry routine completely disrupted. If your Samsung washing machine is failing to drain properly, it’s important to address the issue promptly to prevent potential water damage and further complications. This guide provides a step-by-step approach to troubleshooting and resolving the problem without needing prior technical experience.

Common Causes of Drain Samsung Washing Machine

Several factors can cause your Samsung washing machine to fail to drain. Here are some of the most common:. For more related activities, check out our Bush Washing Machine Not Filling With Water.

• Clogged Drain Hose: The drain hose can become blocked with lint, hair, or small objects, preventing water from flowing out.
• Clogged Drain Pump Filter: The filter protects the drain pump from debris. If it’s clogged, the pump won’t be able to drain the water.
• Drain Pump Failure: The drain pump itself may be defective and unable to pump water.
• Blocked Drainpipe: The drainpipe where the washing machine hose connects could be clogged.
• Kinked or Twisted Drain Hose: A kinked hose restricts water flow.
• Air Lock in the Drain Hose: Air trapped in the hose can prevent proper drainage.
• Faulty Lid Switch: Some models won’t drain if the lid switch isn’t functioning correctly, as it signals the machine that the lid is closed.
• Pressure Switch Problem: A malfunctioning pressure switch may not be detecting the water level correctly, preventing the drain cycle from starting.
• Control Board Issue: In rare cases, a problem with the washing machine’s control board can cause drainage issues.

Symptoms Checklist

These symptoms can help you identify a drain problem:

• Water remains in the washing machine drum after the cycle is complete.
• The washing machine makes a humming or buzzing noise but doesn’t drain.
• The washing machine displays an error code related to draining (e.g., 5E, 5C, nd, E2).
• The washing machine drains very slowly.
• The washing machine doesn’t spin properly or at all.

How to Fix Drain Samsung Washing Machine Step-by-Step Guide

Follow these steps to troubleshoot and fix your Samsung washing machine’s drainage issue:

1. Unplug the Washing Machine: Safety first! Disconnect the washing machine from the power outlet before starting any troubleshooting.
2. Locate the Drain Hose: This is usually located at the back of the washing machine.
3. Inspect the Drain Hose for Kinks or Twists: Straighten any kinks or twists in the hose to ensure smooth water flow.
4. Check the Drain Hose Connection to the Drainpipe: Make sure the hose is securely connected and not blocked by debris.
5. Remove and Clean the Drain Hose: Disconnect the drain hose from both the washing machine and the drainpipe. Flush it out with water to remove any clogs.
6. Locate the Drain Pump Filter: This is usually located at the front of the washing machine, behind a small access panel near the bottom.
7. Drain Any Remaining Water: Place a shallow pan or towel under the access panel to catch any water that may spill out.
8. Remove and Clean the Drain Pump Filter: Carefully unscrew the filter cap and remove the filter. Clean it thoroughly, removing any lint, hair, or debris.
9. Reinstall the Drain Pump Filter: Make sure the filter is properly seated and the cap is securely tightened.
10. Check the Drain Pump: With the filter removed, shine a flashlight into the pump housing to check for any obstructions. You can also carefully try to spin the pump impeller (the small fan-like part inside) with your finger. It should spin freely.
11. Check the Drainpipe: Ensure the drainpipe is not clogged. You can use a plumbing snake to clear any obstructions.
12. Check the Air Gap (if applicable): Some installations use an air gap to prevent backflow. Make sure this is clear of debris.
13. Reconnect the Drain Hose: Reattach the drain hose to the washing machine and the drainpipe, ensuring secure connections.
14. Plug in the Washing Machine: Reconnect the washing machine to the power outlet.
15. Run a Test Cycle: Run a short wash cycle to see if the washing machine drains properly.

Fix the Issue Without Buying Parts

Often, drainage problems can be resolved without buying new parts:

• Reset the Washing Machine: Unplug the washing machine for a few minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
• Regular Cleaning: Regularly clean the drain pump filter (every 1-3 months) to prevent clogs.
• Inspect the Drain Hose Regularly: Check for kinks or blockages and clean as needed.
• Use the Correct Amount of Detergent: Excessive detergent can lead to build-up and drainage problems.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washing machine still isn’t draining, the drain pump might be faulty and need replacement. A new drain pump typically costs between $50 and $150 USD, depending on the model. The lid switch or pressure switch are less common, but possible. Replacing the control board is a last resort and can be expensive, often exceeding $200 USD. Consider the age of your machine and the cost of repair before replacing the control board.

Safety Warning

• Always unplug the washing machine before performing any maintenance or repairs.
• Be careful when draining water to avoid spills and potential slips.
• If you are uncomfortable working with electrical components, consult a qualified appliance repair technician.
• Keep children and pets away from the work area.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Shallow pan or towels
• Flashlight
• Plumbing snake (optional)
• Gloves

FAQ

Q: Why is my Samsung washing machine showing a “5E” or “5C” error code?
A: These codes usually indicate a drainage problem. Check the drain hose, drain pump filter, and drainpipe for clogs.

Q: How often should I clean the drain pump filter?
A: It’s recommended to clean the drain pump filter every 1-3 months, depending on usage.

Q: My washing machine is making a loud humming noise but not draining. What could be the problem?
A: This usually indicates a clogged drain pump or a faulty drain pump motor.

Q: Can I use a chemical drain cleaner to unclog my washing machine drain?
A: It’s generally not recommended to use chemical drain cleaners in washing machines, as they can damage the pump and other components. Manual cleaning is preferred.

Conclusion

Troubleshooting a Samsung washing machine that won’t drain can seem daunting, but by following these steps, you can often resolve the issue yourself and save money on repair costs. Start with the simple checks and work your way through the more complex steps. If you’ve exhausted all troubleshooting options and the problem persists, it might be time to consult a qualified appliance repair technician. Don’t hesitate to try fixing it yourself first you might be surprised at how much you can accomplish!

Youtube Video: